Add support for kvm x86 specific tracepoints
[lttng-modules.git] / README
1 LTTng 2.x modules
2
3 Mathieu Desnoyers
4 March 29, 2013
5
6 LTTng 2.x kernel modules build against a vanilla or distribution kernel, without
7 need for additional patches. Other features:
8
9 - Produces CTF (Common Trace Format) natively,
10 (http://www.efficios.com/ctf)
11 - Tracepoints, Function tracer, CPU Performance Monitoring Unit (PMU)
12 counters, kprobes, and kretprobes support,
13 - Integrated interface for both kernel and userspace tracing,
14 - Have the ability to attach "context" information to events in the
15 trace (e.g. any PMU counter, pid, ppid, tid, comm name, etc).
16 All the extra information fields to be collected with events are
17 optional, specified on a per-tracing-session basis (except for
18 timestamp and event id, which are mandatory).
19
20 To build and install, you will need to have your kernel headers available (or
21 access to your full kernel source tree), and use:
22
23 % make
24 # make modules_install
25 # depmod -a
26
27 If you need to specify the target directory to the kernel you want to build
28 against, use:
29
30 % KERNELDIR=path_to_kernel_dir make
31 # KERNELDIR=path_to_kernel_dir make modules_install
32 # depmod -a kernel_version
33
34 Use lttng-tools to control the tracer. LTTng tools should automatically load
35 the kernel modules when needed. Use Babeltrace to print traces as a
36 human-readable text log. These tools are available at the following URL:
37 http://lttng.org/lttng2.0
38
39 So far, it has been tested on vanilla Linux kernels 2.6.38, 2.6.39, 3.0,
40 3.1, 3.2, 3.3 (on x86 32/64-bit, and powerpc 32-bit at the moment, build
41 tested on ARM), 3.4, 3.5, 3.8, 3.9-rc on x86 64-bit. Kernels 2.6.32 to
42 2.6.34 need up to 3 patches applied (refer to linux-patches within the
43 lttng-modules tree). It should work fine with newer kernels and other
44 architectures, but expect build issues with kernels older than 2.6.36.
45 The clock source currently used is the standard gettimeofday (slower,
46 less scalable and less precise than the LTTng 0.x clocks). Support for
47 LTTng 0.x clocks will be added back soon into LTTng 2.0. Please note
48 that lttng-modules 2.0 can build on a Linux kernel patched with the
49 LTTng 0.x patchset, but the lttng-modules 2.0 replace the lttng-modules
50 0.x, so both tracers cannot be installed at the same time for a given
51 kernel version.
52
53
54 * Kernel config options required
55
56 CONFIG_MODULES: required
57 * Kernel modules support.
58 CONFIG_KALLSYMS: required
59 * See wrapper/ files. This is necessary until the few required missing
60 symbols are exported to GPL modules from mainline.
61 CONFIG_HIGH_RES_TIMERS: required
62 * Needed for LTTng 2.0 clock source.
63 CONFIG_TRACEPOINTS: required
64 kernel tracepoint instrumentation
65 * Enabled as side-effect of any of the perf/ftrace/blktrace
66 instrumentation features.
67
68
69 * Kernel config options supported (optional)
70
71 The following kernel configuration options will affect the features
72 available from LTTng:
73
74
75 CONFIG_HAVE_SYSCALL_TRACEPOINTS:
76 system call tracing
77 lttng enable-event -k --syscall
78 lttng enable-event -k -a
79 CONFIG_PERF_EVENTS:
80 performance counters
81 lttng add-context -t perf:*
82 CONFIG_EVENT_TRACING:
83 needed to allow block layer tracing
84 CONFIG_KPROBES:
85 Dynamic probe.
86 lttng enable-event -k --probe ...
87 CONFIG_KRETPROBES:
88 Dynamic function entry/return probe.
89 lttng enable-event -k --function ...
90
91
92 * Note about Perf PMU counters support
93
94 Each PMU counter has its zero value set when it is attached to a context with
95 add-context. Therefore, it is normal that the same counters attached to both the
96 stream context and event context show different values for a given event; what
97 matters is that they increment at the same rate.
This page took 0.030361 seconds and 4 git commands to generate.