trunk/lttng-xenomai/LinuxTraceToolkitViewer-0.8.61-xenoltt/QUICKSTART

   1
   2 QUICKSTART
   3
   4 How to use LTTng and LTTV in a few lines :
   5
   6 This document is made of four parts : The first one explains how to install
   7 LTTng and LTTV from Debian and RPM binary packages, the second one explains how
   8 to install LTTng and LTTV from sources and the third one describes the steps
   9 to follow to trace a system and view it. The fourth and last part explains
  10 briefly how to add a new trace point to the kernel and to user space
  11 applications.
  12
  13 What you will typically want is to read sections 2 and 3 : install LTTng from
  14 sources and use it.
  15
  16 These operations are made for installing the LTTng 0.5.X tracer on a
  17 linux 2.6.X kernel. You will also find instructions for installation of
  18 LTTV 0.8.x : the Linux Trace Toolkit Viewer.
  19
  20 To see the list of compatibilities between LTTng, ltt-control, LTTV, genevent
  21 and ltt-usertrace, please refer to :
  22 http://ltt.polymtl.ca > LTTng+LTTV versions compatibility
  23
  24
  25
  26 The following lttng patch is necessary to have the tracing hooks in the kernel.
  27 The following ltt-control module controls the tracing.
  28
  29 Required programs and librairies are assumed to be automatically installed in an
  30 installation with Debian or RPM packages. In the case of an installation from
  31 sources, the dependencies are listed.
  32
  33
  34 ** Current development status **
  35
  36 LTTng :
  37 supported architectures :
  38 Intel Pentium (UP/SMP) with TSC
  39 PowerPC 32 and 64 bits
  40 ARM
  41 x86_64
  42 C2 Microsystems (variant of MIPS)
  43
  44 LTTV :
  45 supported architectures :
  46 Intel i386 and better
  47 Intel 64 bits
  48 PowerPC 32 and 64 bits
  49
  50
  51
  52 Author : Mathieu Desnoyers, September 2005
  53 Last update : May 30, 2006
  54
  55
  56 ***********************************************************
  57 ** Section 1 * Installation from Debian or RPM packages  **
  58 ***********************************************************
  59
  60 ** NOTE : RPM and debian packages are only made once a version has been
  61    thoroughly tested. If they do not exist at the moment, please install from
  62    sources (see section 2 below). To see the list of compatibilities between
  63    LTTng, ltt-control, LTTV, genevent and lttng-modules, please refer to
  64    http://ltt.polymtl.ca > LTTng+LTTV versions compatibility
  65
  66
  67 * Install from RPM packages on Fedora Core 4 :
  68
  69 Get LTTV RPM from :
  70
  71 http://ltt.polymtl.ca/packages/fedora/RPMS
  72
  73 LTTV RPM are ready.
  74
  75 LTTng kernel and lttng-modules RPM are available for some architectures (i586,
  76 i686). Feel free to help fix the spec files to have correct lttng-modules RPM
  77 package.
  78
  79
  80 * Install from Deb packages on Debian :
  81
  82 You can use the ltt.polymtl.ca apt source to get LTTV for Debian :
  83
  84 Add the following two sources to your /etc/apt/sources.list :
  85
  86 deb http://ltt.polymtl.ca/packages/debian experimental main
  87 deb-src http://ltt.polymtl.ca/packages/debian experimental main
  88
  89
  90 * Install from precompiled binary packages (LTTV compiled only for i386, and
  91   LTTng only for i686 smp), perform the following :
  92
  93 su -
  94 apt-get update
  95 apt-get install lttv lttv-doc
  96 apt-get install kernel-image-2.6.12-rc4-mm2-lttng-0.4.2
  97 apt-get install lttng-modules-modules-2.6.12-rc4-mm2-lttng-0.4.2
  98   * note : the packages are signed by myself. I am not considered a trusted
  99     Debian source yet, so warnings are normal.
 100
 101 Then, follow the section "Editing the system wide configuration" in section 2.
 102
 103 * Create custom LTTV Debian packages
 104
 105 Binary packages are only available for i386. If you want to create your own LTTV
 106 packages for other platforms, do :
 107
 108 su -
 109 cd /usr/src
 110 apt-get source lttv
 111 cd lttv-0.6.9
 112 dpkg-buildpackage -rfakeroot
 113
 114 You should then have your LTTV .deb files created for your architecture.
 115
 116 * Create custom LTTng packages
 117
 118 For building LTTng Debian packages :
 119
 120 su -
 121 apt-get install kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
 122 cd /usr/src
 123 bzip2 -cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2.tar.bz2 | tar xvof -
 124 cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
 125 make menuconfig (or xconfig or config) (customize your configuration)
 126 make-kpkg kernel_image
 127
 128 You will then see your freshly created .deb in /usr/src. Install it with
 129 dpkg -i /usr/src/(image-name).deb
 130
 131 You will also need to create a package for the lttng-modules :
 132
 133 su -
 134 cd /usr/src
 135 apt-get source lttng-modules
 136 cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
 137 make-kpkg --added_modules /usr/src/lttng-modules-0.3 modules_image
 138
 139 You will then see your freshly created .deb in /usr/src. Install it with
 140 dpkg -i /usr/src/lttng-modules-modules-(your version).deb
 141
 142
 143 Then, follow the section "Editing the system wide configuration" in section 2.
 144
 145
 146 ***********************************************************
 147 ** Section 2 * Installation from sources                 **
 148 ***********************************************************
 149
 150 * Prerequisites
 151
 152 Tools needed to follow the package download steps :
 153
 154 o wget
 155 o bzip2
 156 o gzip
 157 o tar
 158
 159 You have to install the standard development librairies and programs necessary
 160 to compile a kernel :
 161
 162 (from Documentation/Changes in the Linux kernel tree)
 163 o  Gnu C                  2.95.3                  # gcc --version
 164 o  Gnu make               3.79.1                  # make --version
 165 o  binutils               2.12                    # ld -v
 166 o  util-linux             2.10o                   # fdformat --version
 167 o  module-init-tools      0.9.10                  # depmod -V
 168
 169 You might also want to have libncurses5 to have the text mode kernel
 170 configuration menu, but there are alternatives.
 171
 172 Prerequisites for LTTV 0.x.x installation are :
 173
 174 gcc 3.2 or better
 175 gtk 2.4 or better development libraries
 176   (Debian : libgtk2.0, libgtk2.0-dev)
 177   (Fedora : gtk2, gtk2-devel)
 178   note : For Fedora users : this might require at least core 3 from Fedora,
 179   or you might have to compile your own GTK2 library.
 180 glib 2.4 or better development libraries
 181   (Debian : libglib2.0-0, libglib2.0-dev)
 182   (Fedora : glib2, glib2-devel)
 183 libpopt development libraries
 184   (Debian : libpopt0, libpopt-dev)
 185   (Fedora : popt)
 186 libpango development libraries
 187   (Debian : libpango1.0, libpango1.0-dev)
 188   (Fedora : pango, pango-devel)
 189 libc6 development librairies
 190   (Debian : libc6, libc6-dev)
 191   (Fedora : glibc, glibc)
 192
 193
 194 * Getting the LTTng packages
 195
 196 su -
 197 mkdir /usr/src/lttng
 198 cd /usr/src/lttng
 199 (see http://ltt.polymtl.ca/lttng for package listing)
 200 wget http://ltt.polymtl.ca/lttng/patch-2.6.X-lttng-0.x.xx.tar.bz2
 201 bzip2 -cd patch-2.6.X-lttng-0.x.xx.tar.bz2 | tar xvof -
 202
 203
 204 * Getting LTTng kernel sources
 205
 206 su -
 207 cd /usr/src
 208 wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.X.tar.bz2
 209 bzip2 -cd linux-2.6.X.tar.bz2 | tar xvof -
 210 cd linux-2.6.X
 211 cat /usr/src/lttng/patch-2.6.X-lttng-0.x.xx* | patch -p1
 212 cd ..
 213 mv linux-2.6.X linux-2.6.X-lttng-0.x.xx
 214
 215
 216 * Installing a LTTng kernel
 217
 218 su -
 219 cd /usr/src/linux-2.6.X-lttng-0.x.xx
 220 make menuconfig (or make xconfig or make config)
 221     Select the < Help > button if you are not familiar with kernel
 222     configuration.
 223     Items preceded by [*] means they has to be built into the kernel.
 224     Items preceded by [M] means they has to be built as modules.
 225     Items preceded by [ ] means they should be removed.
 226   go to the "Instrumentation Support" section
 227     Select the following options :
 228     [*] Linux Trace Toolkit Instrumentation Support
 229     <M> or <*> Linux Trace Toolkit Tracer
 230         It makes no difference for the rest of the procedure whether the Tracer
 231         is compiled built-in or as a module.
 232     activate :
 233        [*] Align Linux Trace Toolkit Traces
 234        [*] Allow tracing from userspace
 235     your choice (see < Help >) :
 236        [ ] Activate Linux Trace Toolkit Heartbeat Timer
 237     You may or may not activate instrumentation per facility. They are all
 238     selected for logging by default. It can be used as a compile time filter to
 239     enable/disable logging of events. It is useful to discard events with a
 240     minimal impact on the system and especially useful for now, as the dynamic
 241     filter has not been implemented yet.
 242     Select <Exit>
 243   Select <Exit>
 244   Select <Yes>
 245 make
 246 make modules_install
 247
 248 -- on X86, X86_64
 249 make install
 250 reboot
 251 Select the Linux 2.6.17-lttng-0.x.xx kernel in your boot loader.
 252
 253 -- on PowerPC
 254 cp vmlinux.strip /boot/vmlinux-2.6.X-lttng-0.x.xx
 255 cp System.map /boot/System.map-2.6.X-lttng-0.x.xx
 256 cp .config /boot/config-2.6.X-lttng-0.x.xx
 257 depmod -ae -F /boot/System.map-2.6.X-lttng-0.x.xx 2.6.X-lttng-0.x.xx
 258 mkinitrd /boot/initrd.img-2.6.X-lttng-0.x.xx 2.6.X-lttng-0.x.xx
 259 (edit /etc/yaboot.conf to add a new entry pointing to your kernel : the entry
 260 that comes first is the default kernel)
 261 ybin
 262 select the right entry at the yaboot prompt (see choices : tab, select : type
 263 the kernel name followed by enter)
 264 Select the Linux 2.6.17-lttng-0.x.xx kernel in your boot loader.
 265 --
 266
 267
 268
 269 * Editing the system wide configuration
 270
 271 You must activate debugfs and specify a mount point. This is typically done in
 272 fstab such that it happens at boot time.
 273
 274 If you have never used DebugFS before, these operation would do this for you :
 275
 276 mkdir /mnt/debugfs
 277 cp /etc/fstab /etc/fstab.lttng.bkp
 278 echo "debugfs         /mnt/debugfs    debugfs rw              0       0"  >> /etc/fstab
 279
 280 then, rebooting or issuing the following command will activate debugfs :
 281
 282 mount /mnt/debugfs
 283
 284 You need to load the ltt-control module to be able to control tracing from user
 285 space. This is done by issuing the command :
 286
 287 modprobe ltt-control
 288 modprobe ltt-core
 289 modprobe ltt-relay
 290
 291 If you want to have complete information about the kernel state (including all
 292 the process names), you need to load the ltt-statedump module. This is done by
 293 issuing the command :
 294
 295 modprobe ltt-statedump
 296
 297 You can automate at boot time loading the ltt-control module by :
 298
 299 echo ltt-control >> /etc/modules
 300 echo ltt-core >> /etc/modules
 301 echo ltt-relay >> /etc/modules
 302 echo ltt-statedump >> /etc/modules
 303
 304
 305 * Getting and installing the ltt-control package (on the traced machine)
 306 (note : the ltt-control package contains lttd and lttctl. Although it has the
 307 same name as the ltt-control kernel module, they are *not* the same thing.)
 308 su -
 309 cd /usr/src
 310 wget http://ltt.polymtl.ca/lttng/ltt-control-0.x-xxxx2006.tar.gz
 311 gzip -cd ltt-control-0.x-xxxx2006.tar.gz | tar xvof -
 312 cd ltt-control-0.x-xxxx2006
 313 (refer to README to see the development libraries that must be installed on you
 314 system)
 315 ./configure
 316 make
 317 make install
 318
 319 * Getting and installing the ltt-usertrace package for user space tracing
 320 See http://ltt.polymtl.ca/ > USERSPACE TRACING QUICKSTART
 321
 322
 323 * Getting and installing the LTTV package (on the visualisation machine, same or
 324   different from the visualisation machine)
 325
 326 su -
 327 cd /usr/src
 328 wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.x.xx-xxxx2006.tar.gz
 329 gzip -cd LinuxTraceToolkitViewer-0.x.xx-xxxx2006.tar.gz | tar xvof -
 330 cd LinuxTraceToolkitViewer-0.x.xx-xxxx2006
 331 (refer to README to see the development libraries that must be installed on you
 332 system)
 333 ./configure
 334 make
 335 make install
 336
 337
 338
 339
 340 ***********************************************************
 341 ** Section 3 * Using LTTng and LTTV                      **
 342 ***********************************************************
 343
 344 * Use graphical LTTV to control tracing and analyse traces
 345
 346 lttv-gui (or /usr/local/bin/lttv-gui)
 347   - Spot the "Tracing Control" icon : click on it
 348       (it's a traffic light icon)
 349     - enter the root password
 350     - click "start"
 351     - click "stop"
 352     - Yes
 353       * You should now see a trace
 354
 355 * Use text mode LTTng to control tracing
 356
 357 The tracing can be controlled from a terminal by using the lttctl command (as
 358 root).
 359
 360 Start tracing :
 361
 362 lttctl -n trace -d -l /mnt/debugfs/ltt -t /tmp/trace
 363
 364 Stop tracing and destroy trace channels :
 365
 366 lttctl -n trace -R
 367
 368 see lttctl --help for details.
 369
 370
 371 * Use text mode LTTV
 372
 373 Fell free to look in /usr/local/lib/lttv/plugins to see all the text and
 374 graphical plugins available.
 375
 376 For example, a simple trace dump in text format is available with :
 377
 378 lttv -m textDump -t /tmp/trace
 379
 380 see lttv -m textDump --help for detailed command line options of textDump.
 381
 382
 383
 384
 385 ***********************************************************
 386 ** Section 4 * Adding new instrumentations with genevent **
 387 ***********************************************************
 388
 389 * Getting and installing genevent
 390
 391 su -
 392 cd /usr/src
 393 wget http://ltt.polymtl.ca/packages/genevent-0.xx.tar.gz
 394 gzip -cd genevent-0.xx.tar.gz | tar xvof -
 395 cd genevent-0.xx
 396 make
 397 make install
 398
 399
 400 * Add new events to the kernel with genevent
 401
 402 su -
 403 cd /usr/local/share/LinuxTraceToolkitViewer/facilities
 404 cp process.xml yourfacility.xml
 405   * edit yourfacility.xml to fit your needs.
 406 cd /tmp
 407 /usr/local/bin/genevent /usr/local/share/LinuxTraceToolkitViewer/facilities/yourfacility.xml
 408 cp ltt-facility-yourfacility.h ltt-facility-id-yourfacility.h \
 409          /usr/src/linux-2.6.17-lttng-0.x.xx8/include/linux/ltt
 410 cp ltt-facility-loader-yourfacility.c ltt-facility-loader-yourfacility.h \
 411          /usr/src/linux-2.6.17-lttng-0.x.xx/ltt
 412   * edit the kernel file you want to instrument
 413     - Add #include <linux/ltt/ltt-facility-yourfacility.h> at the beginning
 414       of the file.
 415     - Add a call to the tracing functions. See their names and parameters in
 416       /usr/src/linux-2.6.17-lttng-0.x.xx/include/linux/ltt/ltt-facility-yourfacility.h
 417
 418 * Add new events to userspace programs with genevent
 419 See http://ltt.polymtl.ca/ > USERSPACE TRACING QUICKSTART
 420
 421
 422
 423