tags/LinuxTraceToolkitViewer-0.10.0-pre-115102007/doc/developer/tsc.txt

   1
   2 *************************************************************
   3 AMD
   4 http://lkml.org/lkml/2005/11/4/173
   5 http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
   6 http://developer.amd.com/article_print.jsp?id=92 (RH)
   7
   8 [7] AMD's 7th  generation  processors return  a CPUID  base
   9     family value of '7'. These include AMD Athlon, AthlonXP,
  10     AthlonMP, and Duron.
  11
  12 [8] AMD's  8th generation  processors  return an  effective
  13     CPUID family of '0x0F'. These include AMD Opteron,
  14     Athlon64, and Turion.
  15
  16
  17 before 7th gen : ok
  18 7th gen:
  19   P-state (performance state) change
  20     UP : warn about time inaccuracy
  21     SMP
  22       sol : disable powernow
  23       Use monotonic pseudo-TSC
  24   STPCLK-Throttling (temperature) : only done on UP, ok
  25     UP : warn about time inaccuracy
  26 8th gen :
  27   P-state change
  28     UP : inaccuracy
  29     dual-core : locked-step ; inaccuracy
  30     SMP : may drift
  31       sol : disable powernow
  32     Use monotonic pseudo-TSC
  33   SMP, dual core : C1-clock ramping (halt) (power state : C-state)
  34     sol : idle=poll or disable C1-ramping
  35     Use monotonic pseudo-TSC
  36   STPCLK-Throttling (temperature) :
  37     single processor dual-core ok ; inaccuracy
  38     SMP : NOT ok (rare)
  39       Use monotonic pseudo-TSC
  40
  41
  42 Until TSC  becomes invariant, AMD  recommends that operating
  43 system  developers  avoid TSC  as  a  fast  timer source  on
  44 affected systems. (AMD  recommends that the operating system
  45 should  favor these  time sources  in a  prioritized manner:
  46 HPET first,  then ACPI PM  Timer, then PIT.)   The following
  47 pseudo-code shows one way of determining when to use TSC:
  48
  49  use_AMD_TSC() { // returns TRUE if ok to use TSC
  50    if (CPUID.base_family < 0xf) {
  51              // TSC drift doesn't exist on 7th Gen or less
  52              // However, OS still needs to consider effects
  53              // of P-state changes on TSC
  54              return TRUE;
  55    } else if (CPUID.AdvPowerMgmtInfo.TscInvariant) {
  56              // Invariant TSC on 8th Gen or newer, use it
  57              // (assume all cores have invariant TSC)
  58              return TRUE;
  59    } else if ((number_processors == 1)&&(number_cores == 1)){
  60              // OK to use TSC on uni-processor-uni-core
  61              // However, OS still needs to consider effects
  62              // of P-state changes on TSC
  63              return TRUE;
  64    } else if ( (number_processors == 1) &&
  65                (CPUID.effective_family == 0x0f) &&
  66                !C1_ramp_8gen                       ){
  67              // Use TSC on 8th Gen uni-proc with C1_ramp off
  68              // However, OS still needs to consider effects
  69              // of P-state changes on TSC
  70              return TRUE;
  71    } else {
  72              return FALSE;
  73    }
  74  }
  75  C1_ramp_8gen() {
  76     // Check if C1-Clock ramping enabled in  PMM7.CpuLowPwrEnh
  77     // On 8th-Generation cores only. Assume BIOS has setup
  78     // all Northbridges equivalently.
  79     return (1 & read_pci_byte(bus=0,dev=0x18,fcn=3,offset=0x87));
  80  }
  81
  82
  83 When  an operating  system can  not avoid  using TSC  in the
  84 short-term,  the  operating   system  will  need  to  either
  85 re-synchronize the TSC of  the halted core when exiting halt
  86 or disable C1-clock  ramping.  The pseudo-code for disabling
  87 C1-clock ramping follows:
  88
  89  if ( !use_AMD_TSC() &&
  90       (CPUID.effective_family == 0x0f) &&
  91       C1_ramp_8gen()                       ){
  92     for (i=0; i < number_processors; ++i){
  93        // Do for all NorthBridges in platform
  94        tmp = read_pci_byte(bus=0,dev=0x18+i,fcn=3,offset=0x87);
  95        tmp &= 0xFC;    // clears pmm7[1:0]
  96        write_pci_byte(bus=0,dev=0x18+i,fcn=3,offset=0x87,tmp)
  97       }
  98  }
  99
 100
 101 Future TSC Directions and Solutions
 102 ===================================
 103 Future AMD processors will provide a TSC that is P-state and
 104 C-State invariant and unaffected by STPCLK-throttling.  This
 105 will make  the TSC immune  to drift.  Because using  the TSC
 106 for  fast  timer APIs  is  a  desirable  feature that  helps
 107 performance,  AMD  has  defined  a CPUID  feature  bit  that
 108 software   can   test   to   determine   if   the   TSC   is
 109 invariant. Issuing a CPUID instruction with an %eax register
 110 value of  0x8000_0007, on a  processor whose base  family is
 111 0xF, returns "Advanced  Power Management Information" in the
 112 %eax, %ebx, %ecx,  and %edx registers.  Bit 8  of the return
 113 %edx is  the "TscInvariant" feature  flag which is  set when
 114 TSC is P-state, C-state, and STPCLK-throttling invariant; it
 115 is clear otherwise.
 116
 117 The  rate of the  invariant TSC  is implementation-dependent
 118 and  will likely  *not* be  the frequency  of  the processor
 119 core; however,  its period should be short  enough such that
 120 it is  not possible for two  back-to-back rdtsc instructions
 121 to  return the  same  value.  Software  which  is trying  to
 122 measure  actual  processor  frequency  or  cycle-performance
 123 should  use Performance  Event 76h,  CPU Clocks  not Halted,
 124 rather than the TSC to count CPU cycles.
 125
 126
 127
 128 *************************************************************
 129 Intel
 130
 131 Pentium M
 132   family [06H], models [09H, 0DH]
 133   UP
 134     warn about time inaccuracy
 135   SMP
 136     SOL : disable speedstep
 137 Pentium 4 processors, Intel Xeon
 138   family [0FH], models [00H, 01H, or 02H]
 139   UP
 140     warn about time inaccuracy
 141   SMP
 142     SOL : disable speedstep
 143
 144 Other : ok
 145
 146 http://download.intel.com/design/Xeon/specupdt/30675712.pdf
 147 http://forum.rightmark.org/post.cgi?id=print:6:269&user=%20Dmitri%20Besedin&color=1
 148 http://bochs.sourceforge.net/techspec/24161821.pdf cpuid
 149
 150 cpuz
 151 AFAIK this problem only concerns Prescott CPUs, but I bet future production will
 152 also use the same rule.
 153
 154 Well, from what Intel states in one of their docs (Intel(R) Pentium(R) M
 155 Processor on 90 nm Process with 2-MB L2 Cache, Specification Update, Document
 156 No. 302209-010 (http://www.intel.com/design/mobile/specupdt/302209.htm) ), your
 157 supposition is true:
 158
 159
 160 Article V. For Pentium M processors (family [06H], models [09H, 0DH]); for
 161 Pentium 4 processors, Intel Xeon processors (family [0FH], models [00H, 01H, or
 162 02H]); and for P6 family processors: the timestamp counter increments with every
 163 internal processor clock cycle. The internal processor clock cycle is determined
 164 by the current core-clock to bus-clock ratio. Intel(R) SpeedStep(R) technology
 165 transitions may also impact the processor clock.
 166
 167 Article VI. For Pentium 4 processors, Intel Xeon processors (family [0FH],
 168 models [03H and higher]): the time-stamp counter increments at a constant rate.
 169 That rate may be set by the maximum core-clock to bus-clock ratio of the
 170 processor or may be set by the frequency at which the processor is booted. The
 171 specific processor configuration determines the behavior. Constant TSC behavior
 172 ensures that the duration of each clock tick is uniform and supports the use of
 173 the TSC as a wall clock timer even if the processor core changes frequency. This
 174 is the architectural behavior moving forward.
 175
 176
 177 It's a pity they call this sucking TSC behavior an "architectural behavior
 178 moving forward"
 179
 180
 181
 182 *************************************************************
 183 HPET
 184
 185 http://www.intel.com/hardwaredesign/hpetspec_1.pdf
 186
 187
 188
 189