[lttng-tools.git] / tests / regression / tools / clear / test_ust

#!/bin/bash
#
# Copyright (C) 2019 Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
#
# SPDX-License-Identifier: LGPL-2.1-only

TEST_DESC="Clear - UST tracing"

CURDIR=$(dirname $0)/
TESTDIR=$CURDIR/../../..
EVENT_NAME="tp:tptest"
EVENT_STATE_DUMP_START="lttng_ust_statedump:start"
EVENT_STATE_DUMP_END="lttng_ust_statedump:end"
SESSION_NAME=""
TESTAPP_PATH="$TESTDIR/utils/testapp"
TESTAPP_NAME="gen-ust-events"
TESTAPP_BIN="$TESTAPP_PATH/$TESTAPP_NAME/$TESTAPP_NAME"

NUM_TESTS=2071

PAGE_SIZE=$(getconf PAGE_SIZE)
TRACE_PATH=$(mktemp -d -t tmp.test_clear_ust_trace_path.XXXXXX)

# shellcheck source=../utils/utils.sh
source "$TESTDIR/utils/utils.sh"

if [ ! -x "$TESTAPP_BIN" ]; then
	BAIL_OUT "No UST events binary detected."
fi

function clean_path ()
{
	local trace_path=$1
	set -u
	rm -rf $trace_path
	set +u
}

function cond_start_tracing ()
{
	local session_name=$1
	local tracing_active=$2

	if [[ $tracing_active -ne 1 ]]; then
		start_lttng_tracing_ok $session_name
	fi
}

function cond_stop_tracing ()
{
	local session_name=$1
	local tracing_active=$2

	if [[ $tracing_active -ne 1 ]]; then
		stop_lttng_tracing_ok $session_name
	fi
}

function do_clear_session ()
{
	local session_name=$1
	local tracing_active=$2
	local clear_twice=$3
	local rotate_before=$4
	local rotate_after=$5

	cond_stop_tracing $session_name $tracing_active
	if [[ $rotate_before -eq 1 ]]; then
		rotate_session_ok $SESSION_NAME
	fi
	lttng_clear_session_ok $SESSION_NAME
	if [[ $clear_twice -eq 1 ]]; then
		lttng_clear_session_ok $SESSION_NAME
	fi
	if [[ $rotate_after -eq 1 ]]; then
		if [[ $tracing_active -eq 1 ]]; then
			rotate_session_ok $SESSION_NAME
		else
			# Expect failure
			rotate_session_fail $SESSION_NAME
		fi
	fi
	cond_start_tracing $session_name $tracing_active
}

function test_ust_streaming ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local buffer_type=$5
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"
	local channel_name="chan"

	diag "Test ust streaming clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after, buffer_type=$buffer_type"
	create_lttng_session_uri $SESSION_NAME net://localhost
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	$TESTAPP_BIN -i 10
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count $EVENT_NAME $local_path 10
	else
		if [[ "$buffer_type" == "uid" ]]; then
			validate_trace_empty $local_path
		else	# pid
			validate_directory_empty $local_path
		fi
	fi

	destroy_lttng_session_ok $SESSION_NAME
}

function test_ust_streaming_no_event ()
{
	local tracing_active=$1
	local clear_twice=$2
	#local rotate_before=$3 ignored
	#local rotate_after=$4
	local buffer_type=uid
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"
	local channel_name="chan"

	diag "Test ust streaming clear no event"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after, buffer_type=$buffer_type"
	create_lttng_session_uri $SESSION_NAME net://localhost
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME

	do_clear_session $SESSION_NAME "$tracing_active" "$clear_twice" "$rotate_before" "$rotate_after"
	stop_lttng_tracing_ok $SESSION_NAME

	validate_directory_empty "$local_path"

	destroy_lttng_session_ok $SESSION_NAME
}

function test_ust_streaming_rotate_clear ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local buffer_type=$5
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"
	local channel_name="chan"

	diag "Test ust streaming rotate-clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after, buffer_type=$buffer_type"
	create_lttng_session_uri $SESSION_NAME net://localhost
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	$TESTAPP_BIN -i 1
	rotate_session_ok $SESSION_NAME
	$TESTAPP_BIN -i 2
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	$TESTAPP_BIN -i 3
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		local expect_count=6
	else
		local expect_count=4
	fi
	validate_trace_count $EVENT_NAME $local_path $expect_count

	destroy_lttng_session_ok $SESSION_NAME
}

function test_ust_streaming_clear_rotate ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local buffer_type=$5
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"
	local channel_name="chan"

	diag "Test ust streaming clear-rotate"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after, buffer_type=$buffer_type"
	create_lttng_session_uri $SESSION_NAME net://localhost
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	$TESTAPP_BIN -i 1
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	$TESTAPP_BIN -i 2
	rotate_session_ok $SESSION_NAME
	$TESTAPP_BIN -i 3
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		local expect_count=6
	else
		local expect_count=5
	fi
	validate_trace_count $EVENT_NAME $local_path $expect_count

	destroy_lttng_session_ok $SESSION_NAME
}

function test_ust_streaming_live ()
{
	local tracing_active=$1
	local clear_twice=$2
	# 3, 4 unused
	local buffer_type=$5
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"
	local channel_name="chan"

	diag "Test ust streaming live clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, buffer_type=$buffer_type"
	create_lttng_session_uri $SESSION_NAME net://localhost "--live"
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	$TESTAPP_BIN -i 10
	do_clear_session $SESSION_NAME $tracing_active $clear_twice 0 0
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ "$buffer_type" == "uid" ]]; then
		validate_trace_empty $local_path
	else	# pid
		validate_directory_empty $local_path
	fi

	destroy_lttng_session_ok $SESSION_NAME
}

#no clear
function test_ust_basic_streaming_live_viewer ()
{
	local tracing_active=$1
	local clear_twice=$2
	# 3, 4 unused
	local buffer_type=$5
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"
	local remote_trace_path="${HOSTNAME}/${SESSION_NAME}"
	local channel_name="chan"
	local bt_output_path=$(mktemp -u -t tmp.test_${FUNCNAME[0]}_bt_output_path.XXXXXX)
	local file_sync_before_exit=$(mktemp -u -t tmp.test_${FUNCNAME[0]}_sync_before_exit.XXXXXX)

	diag "Test ust basic streaming live with viewer"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, buffer_type=$buffer_type"
	create_lttng_session_uri $SESSION_NAME net://localhost "--live"
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME

	wait_live_trace_ready net://localhost

	# Connect a live viewer
	$BABELTRACE_BIN -i lttng-live net://localhost/host/$remote_trace_path > $bt_output_path &
	local viewer_pid=$!

	wait_live_viewer_connect net://localhost

	$TESTAPP_BIN -i 10 --sync-before-exit $file_sync_before_exit &
	local app_pid=$!

	diag "Wait until viewer sees all 10 expected events"
	local evcount=0
	while [ $evcount -ne 10 ]; do
		evcount=$(cat $bt_output_path | wc -l)
		sleep 0.5
	done
	pass "Live viewer read $evcount events, expect 10"

	destroy_lttng_session_ok $SESSION_NAME
	touch $file_sync_before_exit
	diag "Waiting for application to exit"
	wait $app_pid
	pass "Wait for application to exit"
	diag "Wait for viewer to exit"
	wait $viewer_pid
	ok $? "Babeltrace succeeds"
	pass "Wait for viewer to exit"

	rm -f $bt_output_path
	rm -f $file_sync_before_exit
}

function test_ust_streaming_live_viewer ()
{
	local tracing_active=$1
	local clear_twice=$2
	# 3, 4 unused
	local buffer_type=$5
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"
	local remote_trace_path="${HOSTNAME}/${SESSION_NAME}"
	local channel_name="chan"
	local bt_output_path=$(mktemp -u -t tmp.test_${FUNCNAME[0]}_bt_output_path.XXXXXX)

	diag "Test ust streaming live clear with viewer"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, buffer_type=$buffer_type"
	create_lttng_session_uri $SESSION_NAME net://localhost "--live"
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME

	wait_live_trace_ready net://localhost

	# Connect a live viewer
	$BABELTRACE_BIN -i lttng-live net://localhost/host/$remote_trace_path > $bt_output_path &
	local viewer_pid=$!

	wait_live_viewer_connect net://localhost

	$TESTAPP_BIN -i 10
	do_clear_session $SESSION_NAME $tracing_active $clear_twice 0 0
	stop_lttng_tracing_ok $SESSION_NAME

	destroy_lttng_session_ok $SESSION_NAME
	diag "Wait for viewer to exit"
	wait $viewer_pid
	ok $? "Babeltrace succeeds"
	pass "Wait for viewer to exit"

	clean_path $bt_output_path
}

function test_ust_streaming_live_viewer_new_metadata_after_clear ()
{
	local tracing_active=$1
	local clear_twice=$2
	# 3, 4 unused
	local buffer_type=$5
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"
	local remote_trace_path="${HOSTNAME}/${SESSION_NAME}"
	local channel_name="chan"

	local bt_output_path=$(mktemp -t "tmp.${FUNCNAME[0]}_bt_output.XXXXXX")
	local bt_error_path=$(mktemp -t "tmp.${FUNCNAME[0]}_bt_error.XXXXXX")
	local file_sync_before_exit=$(mktemp -u -t "tmp.${FUNCNAME[0]}_sync_before_exit.XXXXXX")

	diag "Test ust streaming live clear with viewer with new metadata after clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, buffer_type=$buffer_type"
	create_lttng_session_uri "$SESSION_NAME" net://localhost "--live"
	enable_ust_lttng_channel_ok "$SESSION_NAME" $channel_name "--buffers-$buffer_type"

	# The vpid context is added to filter events based on the vpid of the
	# test application as state dump events are used. Regenerating a
	# state dump will cause other instrumented application on the system
	# to trigger a state dump which would throw off checks that rely on an
	# event count.
	add_context_ust_ok "$SESSION_NAME" $channel_name "vpid"
	enable_ust_lttng_event_ok "$SESSION_NAME" $EVENT_NAME $channel_name
	start_lttng_tracing_ok "$SESSION_NAME"

	wait_live_trace_ready net://localhost

	# Connect a live viewer
	$BABELTRACE_BIN -i lttng-live "net://localhost/host/$remote_trace_path" 1> "$bt_output_path" 2> "$bt_error_path" &
	local viewer_pid=$!

	wait_live_viewer_connect net://localhost

	$TESTAPP_BIN -i 10 --sync-before-exit "$file_sync_before_exit" &
	local app_pid=$!

	diag "Wait until viewer sees all 10 expected events"
	local evcount=0
	while [ $evcount -ne 10 ]; do
		evcount=$(wc -l < "$bt_output_path")
		sleep 0.5
	done
	pass "Live viewer read $evcount events, expect 10"

	do_clear_session "$SESSION_NAME" "$tracing_active" "$clear_twice" 0 0

	# Enable new events which will add their descriptions to the metadata
	# file. This validates that, following a clear, the relay daemon rotates
	# the metadata viewer stream to	the new metadata file.
	enable_ust_lttng_event_filter "$SESSION_NAME" $EVENT_STATE_DUMP_START "\$ctx.vpid == $app_pid" $channel_name
	enable_ust_lttng_event_filter "$SESSION_NAME" $EVENT_STATE_DUMP_END "\$ctx.vpid == $app_pid" $channel_name

	# Forcing a state dump to produce the two events enabled above
	regenerate_statedump_ok "$SESSION_NAME"

	diag "Wait until viewer sees all 12 expected events"
	local evcount=0
	while [ $evcount -ne 12 ]; do
		evcount=$(wc -l < "$bt_output_path")
		sleep 0.5
	done
	pass "Live viewer read $evcount events, expect 12"

	stop_lttng_tracing_ok "$SESSION_NAME"

	destroy_lttng_session_ok "$SESSION_NAME"

	touch "$file_sync_before_exit"
	diag "Waiting for application to exit"
	wait $app_pid
	pass "Wait for application to exit"

	diag "Wait for viewer to exit"
	wait $viewer_pid
	ok $? "Babeltrace succeeds"
	pass "Wait for viewer to exit"

	clean_path "$bt_output_path"
	clean_path "$bt_error_path"
	rm -f "$file_sync_before_exit"
}

function test_ust_local ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local buffer_type=$5
	local channel_name="chan"

	diag "Test ust local"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after, buffer_type=$buffer_type"
	create_lttng_session_ok $SESSION_NAME $TRACE_PATH
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	$TESTAPP_BIN -i 10
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count $EVENT_NAME $TRACE_PATH 10
	else
		if [[ "$buffer_type" == "uid" ]]; then
			validate_trace_empty $TRACE_PATH
		else	# pid

			# The sessiond always created a `ust/ directory
			# whenever the UST domain is active
			validate_directory_empty $TRACE_PATH/ust/
		fi
	fi

	destroy_lttng_session_ok $SESSION_NAME
}

function test_ust_local_no_event ()
{
	local tracing_active=$1
	local clear_twice=$2
	#local rotate_before=$3 ignored
	#local rotate_after=$4 ignored
	local buffer_type=$5
	local channel_name="chan"

	diag "Test ust local no event"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after, buffer_type=$buffer_type"
	create_lttng_session_ok $SESSION_NAME "$TRACE_PATH"
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name "--buffers-$buffer_type"
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME

	do_clear_session $SESSION_NAME "$tracing_active" "$clear_twice" "$rotate_before" "$rotate_after"
	stop_lttng_tracing_ok $SESSION_NAME

	validate_directory_empty "$TRACE_PATH"

	destroy_lttng_session_ok $SESSION_NAME
}

function test_ust_local_rotate_clear ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local buffer_type=$5
	local channel_name="chan"

	diag "Test ust local rotate-clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after, buffer_type=$buffer_type"
	create_lttng_session_ok $SESSION_NAME $TRACE_PATH
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	$TESTAPP_BIN -i 1
	rotate_session_ok $SESSION_NAME
	$TESTAPP_BIN -i 2
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	$TESTAPP_BIN -i 3
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		local expect_count=6
	else
		local expect_count=4
	fi
	validate_trace_count $EVENT_NAME $TRACE_PATH $expect_count

	destroy_lttng_session_ok $SESSION_NAME
}

function test_ust_local_clear_rotate ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local buffer_type=$5
	local channel_name="chan"

	diag "Test ust local clear-rotate"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after, buffer_type=$buffer_type"
	create_lttng_session_ok $SESSION_NAME $TRACE_PATH
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	$TESTAPP_BIN -i 1
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	$TESTAPP_BIN -i 2
	rotate_session_ok $SESSION_NAME
	$TESTAPP_BIN -i 3
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		local expect_count=6
	else
		local expect_count=5
	fi
	validate_trace_count $EVENT_NAME $TRACE_PATH $expect_count

	destroy_lttng_session_ok $SESSION_NAME
}

function do_ust_snapshot ()
{
	local session_name=$1
	local trace_path=$2
	local tracing_active=$3
	local clear_twice=$4
	local buffer_type=$5
	local channel_name="snapshot"

	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $session_name $EVENT_NAME $channel_name
	start_lttng_tracing_ok $session_name

	# Generate 10 events that will sit in the buffers.
	$TESTAPP_BIN -i 10

	# Take a first snapshot and validate that the events are present.
	lttng_snapshot_record $session_name
	stop_lttng_tracing_ok $session_name
	validate_trace_count $EVENT_NAME $trace_path 10

	# Clean the output path
	clean_path $trace_path
	start_lttng_tracing_ok $session_name

	do_clear_session $SESSION_NAME $tracing_active $clear_twice 0 0

	# Make sure the subsequent snapshot is empty and valid.
	lttng_snapshot_record $session_name
	stop_lttng_tracing_ok $session_name
	validate_trace_empty $trace_path

	# Clean the output path
	clean_path $trace_path
	start_lttng_tracing_ok $session_name

	# Make sure that everything still works, generate events and take a
	# snapshot.
	$TESTAPP_BIN -i 10
	lttng_snapshot_record $session_name
	stop_lttng_tracing_ok $session_name
	validate_trace_count $EVENT_NAME $trace_path 10
}

function test_ust_streaming_snapshot ()
{
	local tracing_active=$1
	local clear_twice=$2
	# 3, 4 unused.
	local buffer_type=$5

	diag "Test ust streaming snapshot clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, buffer_type=$buffer_type"

	create_lttng_session_uri $SESSION_NAME net://localhost "--snapshot"
	do_ust_snapshot $SESSION_NAME $TRACE_PATH $tracing_active $clear_twice $buffer_type
	destroy_lttng_session_ok $SESSION_NAME
}

function test_ust_local_snapshot ()
{
	local tracing_active=$1
	local clear_twice=$2
	# 3, 4 unused.
	local buffer_type=$5

	diag "Test ust local snapshot clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, buffer_type=$buffer_type"

	create_lttng_session_ok $SESSION_NAME $TRACE_PATH "--snapshot"
	do_ust_snapshot $SESSION_NAME $TRACE_PATH $tracing_active $clear_twice $buffer_type
	destroy_lttng_session_ok $SESSION_NAME
}

# snapshot for per-pid is tested independently of the "buffer type" parameter
# because an application needs to be live to appear in a snapshot.
function test_ust_local_snapshot_per_pid ()
{
	local tracing_active=$1
	local clear_twice=$2
	# 3, 4 unused.
	local buffer_type=$5
	local channel_name="channel0"
	local file_sync_before_last=$(mktemp -u -t "tmp.${FUNCNAME[0]}_sync_before_last.XXXXXX")
	local file_sync_before_last_touch=$(mktemp -u -t "tmp.${FUNCNAME[0]}_sync_before_last_touch.XXXXXX")
	local file_sync_before_exit=$(mktemp -u -t "tmp.${FUNCNAME[0]}_sync_before_exit.XXXXXX")
	local file_sync_before_exit_touch=$(mktemp -u -t "tmp.${FUNCNAME[0]}_sync_before_exit_touch.XXXXXX")

	diag "Test ust local snapshot clear per pid"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, buffer_type=$buffer_type"

	create_lttng_session_ok $SESSION_NAME $TRACE_PATH "--snapshot"
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME

	# Generate 10 events that will sit in the buffers.
	$TESTAPP_BIN -i 10 -w 0 \
		--sync-before-last-event ${file_sync_before_last} \
		--sync-before-last-event-touch ${file_sync_before_last_touch} \
		--sync-before-exit ${file_sync_before_exit} \
		--sync-before-exit-touch ${file_sync_before_exit_touch} >/dev/null 2>&1 &

	# Continue only when there is only the last event remaining.
	while [ ! -f "${file_sync_before_last_touch}" ]; do
		sleep 0.5
	done

	# Take a first snapshot and validate that the events are present.
	lttng_snapshot_record $SESSION_NAME
	stop_lttng_tracing_ok $SESSION_NAME
	validate_trace_count $EVENT_NAME $TRACE_PATH 9

	# Clean the output path
	clean_path $TRACE_PATH
	start_lttng_tracing_ok $SESSION_NAME

	do_clear_session $SESSION_NAME $tracing_active $clear_twice 0 0

	# Make sure the subsequent snapshot is empty and valid.
	lttng_snapshot_record $SESSION_NAME
	stop_lttng_tracing_ok $SESSION_NAME
	validate_trace_empty $TRACE_PATH

	# Validate that tracing still works and subsequent snapshots are valid.
	# Clean the output path.
	clean_path $TRACE_PATH
	start_lttng_tracing_ok $SESSION_NAME

	# Continue over the last event.
	touch ${file_sync_before_last}

	# Wait for the before exit sync point. This ensure that we went over the
	# last tracepoint.
	while [ ! -f "${file_sync_before_exit_touch}" ]; do
		sleep 0.5
	done

	# Make sure the snapshot contains the last event.
	lttng_snapshot_record $SESSION_NAME
	stop_lttng_tracing_ok $SESSION_NAME
	validate_trace_count $EVENT_NAME $TRACE_PATH 1

	# Release the application.
	touch ${file_sync_before_exit}
	wait
	destroy_lttng_session_ok $SESSION_NAME

	rm -f ${file_sync_before_last}
	rm -f ${file_sync_before_last_touch}
	rm -f ${file_sync_before_exit}
	rm -f ${file_sync_before_exit_touch}
}

function test_ust_streaming_tracefile_rotation ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local buffer_type=$5
	local channel_name="rotchan"
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"

	diag "Test ust streaming clear with tracefile rotation"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after, buffer_type=$buffer_type"
	create_lttng_session_uri $SESSION_NAME net://localhost
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --subbuf-size=$PAGE_SIZE \
		--tracefile-size=$PAGE_SIZE --tracefile-count=2 --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	$TESTAPP_BIN -i 10
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count $EVENT_NAME $local_path 10
	else
		if [[ "$buffer_type" == "uid" ]]; then
			validate_trace_empty $local_path
		else	# pid
			validate_directory_empty $local_path
		fi
	fi

	start_lttng_tracing_ok $SESSION_NAME
	$TESTAPP_BIN -i 20
	stop_lttng_tracing_ok

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count $EVENT_NAME $local_path 30
	else
		validate_trace_count $EVENT_NAME $local_path 20
	fi

	destroy_lttng_session_ok $SESSION_NAME
}

# With 1 byte per event (as strict minimum), generating 200000 events
# guarantees filling up 2 files of 64k in size, which is the maximum
# page size known on Linux
function test_ust_streaming_tracefile_rotation_overwrite_files ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local buffer_type=$5
	local channel_name="rotchan"
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"

	diag "Test ust streaming clear with tracefile rotation, overwrite files"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after, buffer_type=$buffer_type"
	create_lttng_session_uri $SESSION_NAME net://localhost
	enable_ust_lttng_channel_ok $SESSION_NAME $channel_name --subbuf-size=$PAGE_SIZE \
		--tracefile-size=$PAGE_SIZE --tracefile-count=2 --buffers-$buffer_type
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	taskset -c "$(get_any_available_cpu)" $TESTAPP_BIN -i 200000
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count_range_incl_min_excl_max $EVENT_NAME $local_path 1 200000
	else
		if [[ "$buffer_type" == "uid" ]]; then
			validate_trace_empty $local_path
		else	# pid
			validate_directory_empty $local_path
		fi
	fi

	start_lttng_tracing_ok $SESSION_NAME
	taskset -c "$(get_any_available_cpu)" $TESTAPP_BIN -i 400000
	stop_lttng_tracing_ok

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count_range_incl_min_excl_max $EVENT_NAME $local_path 1 600000
	else
		validate_trace_count_range_incl_min_excl_max $EVENT_NAME $local_path 1 200000
	fi

	destroy_lttng_session_ok $SESSION_NAME
}

function test_ust_disallow_clear ()
{
	diag "Test ust disallow clear on relay daemon"
	SESSION_NAME=$(randstring 16 0)

	LTTNG_RELAYD_DISALLOW_CLEAR=1 start_lttng_relayd "-o $TRACE_PATH"

	start_lttng_sessiond

	create_lttng_session_uri $SESSION_NAME net://localhost
	enable_ust_lttng_event_ok $SESSION_NAME $EVENT_NAME
	start_lttng_tracing_ok $SESSION_NAME
	lttng_clear_session_fail $SESSION_NAME
	destroy_lttng_session_ok $SESSION_NAME

	stop_lttng_sessiond
	stop_lttng_relayd
	clean_path $TRACE_PATH
}

plan_tests $NUM_TESTS

print_test_banner "$TEST_DESC"

bail_out_if_no_babeltrace

streaming_tests=(test_ust_streaming
	test_ust_streaming_rotate_clear
	test_ust_streaming_clear_rotate
	test_ust_streaming_tracefile_rotation
	test_ust_streaming_tracefile_rotation_overwrite_files
	test_ust_streaming_no_event
)

live_tests=(test_ust_streaming_live
	test_ust_basic_streaming_live_viewer
	test_ust_streaming_live_viewer
	test_ust_streaming_live_viewer_new_metadata_after_clear
)

local_tests=(test_ust_local
	test_ust_local_rotate_clear
	test_ust_local_clear_rotate
	test_ust_local_no_event
)

snapshot_uid_tests=(test_ust_streaming_snapshot
	test_ust_local_snapshot
)

snapshot_pid_tests=(test_ust_local_snapshot_per_pid)

start_lttng_relayd "-o $TRACE_PATH"
start_lttng_sessiond

# Per-UID buffers

# Clear with tracing active, clear once
for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_uid_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 1 0 0 0 uid
	clean_path $TRACE_PATH
done

# Clear with tracing active, clear twice
for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_uid_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 1 1 0 0 uid
	clean_path $TRACE_PATH
done

# Clear with tracing inactive, clear once
for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_uid_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 0 0 0 0 uid
	clean_path $TRACE_PATH
done

# Clear with tracing inactive, clear twice
for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_uid_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 0 1 0 0 uid
	clean_path $TRACE_PATH
done

# Clear with tracing inactive, rotate-clear once
for fct_test in ${streaming_tests[@]} ${local_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 0 0 1 0 uid
	clean_path $TRACE_PATH
done

# Clear with tracing inactive, clear once-rotate(fail)
for fct_test in ${streaming_tests[@]} ${local_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 0 0 0 1 uid
	clean_path $TRACE_PATH
done


# Per-PID buffers.

# Clear with tracing active, clear once
for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_pid_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 1 0 0 0 pid
	clean_path $TRACE_PATH
done

# Clear with tracing active, clear twice
for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_pid_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 1 1 0 0 pid
	clean_path $TRACE_PATH
done

# Clear with tracing inactive, clear once
for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_pid_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 0 0 0 0 pid
	clean_path $TRACE_PATH
done

# Clear with tracing inactive, clear twice
for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_pid_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 0 1 0 0 pid
	clean_path $TRACE_PATH
done

# Clear with tracing inactive, rotate-clear once
for fct_test in ${streaming_tests[@]} ${local_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 0 0 1 0 pid
	clean_path $TRACE_PATH
done

# Clear with tracing inactive, clear once-rotate(fail)
for fct_test in ${streaming_tests[@]} ${local_tests[@]};
do
	SESSION_NAME=$(randstring 16 0)
	${fct_test} 0 0 0 1 pid
	clean_path $TRACE_PATH
done

stop_lttng_sessiond
stop_lttng_relayd

test_ust_disallow_clear

rm -rf "$TRACE_PATH"