lttng-tools.git
7 years agoFix: test_kernel_data dereference of null pointer
Jonathan Rajotte [Tue, 17 Jan 2017 15:02:08 +0000 (10:02 -0500)] 
Fix: test_kernel_data dereference of null pointer

Skip tests when tested struct is null.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoMan: move [SESSION] before options
Jonathan Rajotte [Fri, 13 Jan 2017 22:04:42 +0000 (17:04 -0500)] 
Man: move [SESSION] before options

The previous synopses for the live mode can cause confusion to users
since it can lead to an error while trying one of the simplest create
command for live session that the synopsis is proposing:

lttng create --live test.

Other synopsis are modified for symmetry.

Fixes #1081

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: consumerd: add missing put_subbuf for ust and kernel errors
Mathieu Desnoyers [Wed, 11 Jan 2017 20:49:49 +0000 (15:49 -0500)] 
Fix: consumerd: add missing put_subbuf for ust and kernel errors

While reading a sub-buffer, error handling need to put the sub-buffer,
else all future attempts to use the stream will trigger warnings.

The affects recent features added to UST and kernel tracing.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: sessiond: only send streams to consumer once
Mathieu Desnoyers [Wed, 11 Jan 2017 20:49:48 +0000 (15:49 -0500)] 
Fix: sessiond: only send streams to consumer once

Session daemon should not send streams to consumer daemon
repeatedly when CPU hotplug is performed while doing kernel
tracing.

This causes the consumer daemon to have multiple file descriptors
on the same stream, and thus try to perform operations like reading
a sub-buffer and checking for data pending concurrently. This triggers
safety-net warnings in the kernel tracer.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: consumerd main: needs to be a registered RCU thread
Mathieu Desnoyers [Thu, 19 Jan 2017 00:23:27 +0000 (19:23 -0500)] 
Fix: consumerd main: needs to be a registered RCU thread

main->lttng_consumer_destroy->destroy_data_stream_ht requires a RCU
read-side lock.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: thread_dispatch_ust_registration needs to be a RCU thread
Mathieu Desnoyers [Thu, 19 Jan 2017 00:23:26 +0000 (19:23 -0500)] 
Fix: thread_dispatch_ust_registration needs to be a RCU thread

It uses a read-side lock.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: don't abort metadata push on closed metadata
Jérémie Galarneau [Thu, 19 Jan 2017 00:23:09 +0000 (19:23 -0500)] 
Fix: don't abort metadata push on closed metadata

The failure/exit of any of the consumerd, relayd or applications
(in per-PID buffer mode) will cause the metadata closed flag to
be set.

While pushing new metadata updates to the consumerd (and relayd
in streaming/live scenarios) will fail, those conditions should
be handled in-place.

Applications are _expected_ to exit during the course of a per-PID
session. However, they will typically have pushed their metadata
to the metadata cache before doing so. The session daemon must
flush the unconsumed metadata to the consumerd in this case.

Failure to answer to the metadata request originating from the
consumerd can cause it to keep the stream lock held and, thus,
prevent the channel poll thread from cleaning up on channel
close.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agolttng-tools: remove bogus interpreter line from utils shell library
Nathan Lynch [Mon, 9 Jan 2017 22:14:28 +0000 (16:14 -0600)] 
lttng-tools: remove bogus interpreter line from utils shell library

tests/utils/utils.sh is always sourced, never executed, and
/src/bin/bash is not a typical path for a shell interpreter.  Just
delete it.

Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: consumerd: order of metadata cache vs stream lock
Mathieu Desnoyers [Mon, 9 Jan 2017 16:23:16 +0000 (11:23 -0500)] 
Fix: consumerd: order of metadata cache vs stream lock

The locking order comment in consumer.h is incorrect. First, its
description of locking order is not in sync with the comment found in
consumer-metadata-cache.h. The comment in struct consumer_metadata_cache
only states that the metadata cache lock nests inside the consumer_data
lock, and does not mention the stream lock, which implies that the
metadata cache lock does NOT nest inside the stream lock. But let's
investigate further to confirm:

* lttng_consumer_read_subbuffer() acquires the stream lock, and then
  calls lttng_ustconsumer_read_subbuffer() with stream lock held,
  and then invokes commin_one_metadata_packet(), which acquires the
  metadata cache lock.

* lttng_ustconsumer_sync_metadata() acquires the metadata stream lock,
  and calls commit_one_metadata_packet(), which takes the metadata cache
  lock.

Therefore, update the comment in consumer.h to state that the metadata
cache lock nests INSIDE the stream lock, and update
consumer_del_metadata_stream() accordingly.

This should take care of fixing the locking order reversal found by
Coverity.

CID 1368314 (#1 of 1): Thread deadlock (ORDER_REVERSAL)
CID 1368319:  Program hangs  (ORDER_REVERSAL)

Fixes: 5feafd4130 "Fix: protect the channel's metadata stream using the metadata cache lock"
Fixes: 1ea6cc572b "Fix: lock nesting order reversed"
Fixes: fb549e7ac2 "Fix: reverse channel and metadata cache lock nesting order"
Reported-by: Coverity Scan
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: add missing rcu_barrier before daemon teardown
Mathieu Desnoyers [Wed, 21 Dec 2016 22:59:38 +0000 (17:59 -0500)] 
Fix: add missing rcu_barrier before daemon teardown

When performing the "cleanup" of sessiond, consumerd, and relayd, we
destroy data structures that may still be concurrently accessed by
call_rcu worker thread.

Ensure no more work is present in the call_rcu worker thread by issuing
a rcu_barrier barrier. Note that this expects call_rcu handlers don't
chain work to other call_rcu handlers.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: Add missing pthread.h include
Michael Jeanson [Mon, 5 Dec 2016 20:39:26 +0000 (15:39 -0500)] 
Fix: Add missing pthread.h include

Some libc like musl and uClibc requires explicit includes of pthread.h

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: support for older versions of Babeltrace in test script
Francis Deslauriers [Tue, 20 Dec 2016 21:31:26 +0000 (16:31 -0500)] 
Fix: support for older versions of Babeltrace in test script

A new context field was introduced in version LTTng 2.8 that is printed
by Babeltrace prior to v1.2.5. This regex thus fails to match the
output. Since the context fields are not used by the script, we create a
non-capturing group for these fields that matches on both old and new
Babeltrace.
This is causing problems on Ubuntu 14.04 Trusty when building
lttng-tools from source and using the Babeltrace package from the
official repository (v1.2.1) to run the test suite.

Also, this patch removes commented and used code in the function but
keeps the names of non-capturing groups for readability.

Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
CC: Philippe Proulx <pproulx@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: reverse channel and metadata cache lock nesting order
Jérémie Galarneau [Sun, 8 Jan 2017 19:29:09 +0000 (14:29 -0500)] 
Fix: reverse channel and metadata cache lock nesting order

CID 1368319:  Program hangs  (ORDER_REVERSAL)

The lttng_consumer_channel lock must be nested outside of the
metadata cache lock, as indicated in the structure's comments.

Reported-by: Coverity Scan
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: only lock the metadata_cache in userspace consumers
Jérémie Galarneau [Sat, 7 Jan 2017 18:42:12 +0000 (13:42 -0500)] 
Fix: only lock the metadata_cache in userspace consumers

The kernel consumer, which re-uses the consumer_del_metadata_stream
function, has no metadata cache. Therefore, it can't be used to
protect the metadata stream (see 5feafd41).

However, only the userspace consumers invoke
consumer_metadata_cache_write() which the previous fix seeked to
protect against. It is therefore safe to omit this lock in the
kernel consumer case.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: lock nesting order reversed
Jérémie Galarneau [Sat, 7 Jan 2017 17:32:13 +0000 (12:32 -0500)] 
Fix: lock nesting order reversed

The lttng_consumer_stream lock must nest INSIDE the metadata
cache lock, as indicated in the structure's comments
(see consumer.h:340).

CID 1368314 (#1 of 1): Thread deadlock (ORDER_REVERSAL)

Reported-by: Coverity Scan
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: lttng-relayd: forcefully close stream on relayd shutdown
Jonathan Rajotte [Tue, 20 Dec 2016 23:25:17 +0000 (18:25 -0500)] 
Fix: lttng-relayd: forcefully close stream on relayd shutdown

Add an "aborted" field to relay_session struct to indicate that on
shutdown pending data for a stream is no relevant and should not be
waited for.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: protect the channel's metadata stream using the metadata cache lock
Jérémie Galarneau [Wed, 21 Dec 2016 22:56:24 +0000 (17:56 -0500)] 
Fix: protect the channel's metadata stream using the metadata cache lock

The consumer_thread_data_poll and consumer_thread_metadata_poll
both access the channel's metadata stream.

During a session destruction, consumer_thread_metadata_poll will
destroy all metadata streams. However, the consumer_thread_data_poll
may still invoke a consumer_metadata_cache_write() triggered
by a "ready" subbuffer. Hence, the metadata stream must be protected
from this action by the metadata cache lock.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: double unlock of metadata mutex on error
Jérémie Galarneau [Tue, 20 Dec 2016 20:00:04 +0000 (15:00 -0500)] 
Fix: double unlock of metadata mutex on error

lttng_ustconsumer_sync_metadata must leave the metadata lock
in its initial state. Otherwise an error may result in a
double unlock in the caller.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: free previous instance of url (alloc_url) on default live url assignation
Jonathan Rajotte [Mon, 12 Dec 2016 21:39:17 +0000 (16:39 -0500)] 
Fix: free previous instance of url (alloc_url) on default live url assignation

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: add element length check in lttng_index_file_open
Mathieu Desnoyers [Thu, 15 Dec 2016 11:13:19 +0000 (12:13 +0100)] 
Fix: add element length check in lttng_index_file_open

Handle cases where the index file header would contain a corrupted
value.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAssert that index_file does not exist before setting a new one
Jérémie Galarneau [Fri, 16 Dec 2016 08:10:00 +0000 (03:10 -0500)] 
Assert that index_file does not exist before setting a new one

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: relayd vs consumerd compatibility
Mathieu Desnoyers [Thu, 15 Dec 2016 10:04:57 +0000 (11:04 +0100)] 
Fix: relayd vs consumerd compatibility

relay and consumerd 2.7 and 2.8 are expected to negociate compatibility
with the lowest common minor version.

If a consumer daemon 2.8 interacts with a relayd 2.7, it needs to send
the index fields for ctf index 1.0. Same if a relayd 2.8 interacts with
a consumer daemon 2.7: relayd should expect ctf index 1.0 fields, and
generate a ctf index 1.0 index file layout.

If both relayd and consumerd versions are 2.8+, then we can send the ctf
index 1.1 fields over the protocol, and store them in the index files.

Whenever the relayd live viewer server opens and reads an index file,
it needs to use the file's header to figure out the index "element"
size.

[ Should be applied to master, stable-2.9, stable-2.8. ]

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agotests: Implement tests for lttng-ust LTTNG_UST_BLOCKING_RETRY_TIMEOUT
Mathieu Desnoyers [Tue, 8 Nov 2016 22:59:12 +0000 (17:59 -0500)] 
tests: Implement tests for lttng-ust LTTNG_UST_BLOCKING_RETRY_TIMEOUT

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: "Carlos O'Donell" <carlos@redhat.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agolttng-add-context(1): add missing man: prefix
Philippe Proulx [Wed, 30 Nov 2016 17:29:06 +0000 (12:29 -0500)] 
lttng-add-context(1): add missing man: prefix

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agolttng-add-context(1): fix style
Philippe Proulx [Mon, 28 Nov 2016 23:54:41 +0000 (18:54 -0500)] 
lttng-add-context(1): fix style

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agolttng-snapshot(1): fix style
Philippe Proulx [Mon, 28 Nov 2016 23:27:53 +0000 (18:27 -0500)] 
lttng-snapshot(1): fix style

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agolttng-metadata(1): fix style
Philippe Proulx [Mon, 28 Nov 2016 23:27:43 +0000 (18:27 -0500)] 
lttng-metadata(1): fix style

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agodoc/man: put short option's argument too
Philippe Proulx [Mon, 28 Nov 2016 23:25:28 +0000 (18:25 -0500)] 
doc/man: put short option's argument too

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoRemove `metadata` command from various help resources
Philippe Proulx [Mon, 28 Nov 2016 23:14:55 +0000 (18:14 -0500)] 
Remove `metadata` command from various help resources

This command is now deprecated. Its own man page remains available
and warns the user that it's deprecated and suggests to look at
lttng-regenerate(1) instead.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoList the `regenerate` command in various help resources
Philippe Proulx [Mon, 28 Nov 2016 23:06:34 +0000 (18:06 -0500)] 
List the `regenerate` command in various help resources

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agolttng-load(1): fix synopsis and style
Philippe Proulx [Mon, 28 Nov 2016 22:57:06 +0000 (17:57 -0500)] 
lttng-load(1): fix synopsis and style

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: truncate the metadata file in shm-path
Liguang Li [Mon, 28 Nov 2016 08:37:47 +0000 (16:37 +0800)] 
Fix: truncate the metadata file in shm-path

In the shm-path mode, the metadata will be backuped to a metadata
file, when run the lttng command "lttng metadata regenerate" to
resample the wall time following a major NTP correction, the metadata
file will not be truncated and regenerated.

Add the function clear_metadata_file() to truncate and regenerate the
metadata file.

Signed-off-by: Liguang Li <liguang.li@windriver.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoLoad: add message indication that a name override was carried out
Jonathan Rajotte [Thu, 24 Nov 2016 22:14:22 +0000 (17:14 -0500)] 
Load: add message indication that a name override was carried out

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoLoad: expose overrides elements in mi
Jonathan Rajotte [Thu, 24 Nov 2016 21:44:17 +0000 (16:44 -0500)] 
Load: expose overrides elements in mi

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: assign values to path, ctrl and data uris during configuration load
Jonathan Rajotte [Thu, 24 Nov 2016 19:33:32 +0000 (14:33 -0500)] 
Fix: assign values to path, ctrl and data uris during configuration load

Since overrides can be partial (name only, etc.) always assign a base
value from the configuration being loaded then apply overrides.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoLoad: test that name override does not have side effects
Jonathan Rajotte [Thu, 24 Nov 2016 19:27:28 +0000 (14:27 -0500)] 
Load: test that name override does not have side effects

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoDocs: remove invalid short option -U and move option descriptions
Jérémie Galarneau [Thu, 24 Nov 2016 16:07:42 +0000 (11:07 -0500)] 
Docs: remove invalid short option -U and move option descriptions

Reported-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: add missing refcount of loaded modules
Francis Deslauriers [Mon, 21 Nov 2016 17:36:00 +0000 (12:36 -0500)] 
Fix: add missing refcount of loaded modules

Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: only unload successfully loaded kernel modules
Jérémie Galarneau [Fri, 18 Nov 2016 21:35:34 +0000 (16:35 -0500)] 
Fix: only unload successfully loaded kernel modules

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: test cases now rely on explicit workloads
Francis Deslauriers [Thu, 10 Nov 2016 20:26:35 +0000 (15:26 -0500)] 
Fix: test cases now rely on explicit workloads

Run a process explicitly in the tracing session to generate the enabled events
rather than relying on the events generated by the lttng CLI.

Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agom4/pprint.m4: update with correct quoting
Philippe Proulx [Wed, 2 Nov 2016 07:25:25 +0000 (03:25 -0400)] 
m4/pprint.m4: update with correct quoting

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoconfigure.ac: move warning to end of output for the end user
Philippe Proulx [Fri, 28 Oct 2016 23:01:19 +0000 (19:01 -0400)] 
configure.ac: move warning to end of output for the end user

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agodoc/man: only require asciidoc-attrs.conf when building the man pages
Philippe Proulx [Fri, 28 Oct 2016 22:33:19 +0000 (18:33 -0400)] 
doc/man: only require asciidoc-attrs.conf when building the man pages

Situations:

* If you want to and can build the man pages:
  * If it's a tarball tree:
    * Make the man page destinations depend on asciidoc-attrs.conf.
      Since it's a generated file, its date is greater than the
      date of the prebuilt man pages, therefore the man pages are
      built again, which is a good thing because they include the
      default values of this build.
  * If it's a Git tree:
    * Always build the man pages anyway (no prebuilt man pages here).
* If you want to, but cannot build the man pages:
  * If it's a tarball tree:
    * Make the man page destinations NOT depend on asciidoc-attrs.conf,
      because its recent date would ask said destinations to be rebuilt
      and this is not possible because we don't have the tools.

      However, warn the user at configure time that the prebuilt man
      pages will be installed, which means that they will contain the
      project's default values, not this build's default values.
  * If it's a Git tree:
    * Not valid: error at configure time as usual.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoTest fix: increase test count in plan of test_perf_raw
Jérémie Galarneau [Thu, 10 Nov 2016 19:47:14 +0000 (14:47 -0500)] 
Test fix: increase test count in plan of test_perf_raw

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoCreate a dedicated test suite for Perf
Julien Desfossez [Mon, 12 Sep 2016 20:57:10 +0000 (16:57 -0400)] 
Create a dedicated test suite for Perf

Introduce the perf_regression test suite that must be run manually to
check if the support for the Perf-related features are available on the
current machine. This test cannot be run automatically since there are
some platforms where it can fail (VMs, some SoCs, etc).

For now, the test only makes sure that we can trace events with perf
contexts enabled by raw ID in kernel and user-space. The test only works
if libpfm is installed on the system and fails if it is not installed.

Signed-off-by: Julien Desfossez <jdesfossez@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoTests: accommodate stricter mktemp implementations in tests
Nathan Lynch [Tue, 1 Nov 2016 17:25:47 +0000 (11:25 -0600)] 
Tests: accommodate stricter mktemp implementations in tests

Busybox's mktemp command uses mkstemp(3) which requires the last six
characters of the template to be X's.  Extend the mktemp templates
used in the test scripts.

Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd version info to lttng-relayd help
Anders Wallin [Thu, 20 Oct 2016 05:58:55 +0000 (07:58 +0200)] 
Add version info to lttng-relayd help

lttng-relayd man pages states that the option
-V --version is available, but it it's missing in the code

Signed-off-by: Anders Wallin <wallinux@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: stop sessiond threads on health thread error
Jérémie Galarneau [Thu, 20 Oct 2016 21:05:14 +0000 (17:05 -0400)] 
Fix: stop sessiond threads on health thread error

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: stop lttng-relayd threads on health thread error
Jérémie Galarneau [Thu, 20 Oct 2016 19:45:42 +0000 (15:45 -0400)] 
Fix: stop lttng-relayd threads on health thread error

The lttng-relayd health thread may fail to initialize for
a variety of reason (notably, a too long unix domain socket
address), which will cause it to never notify that it is
ready.

In such circumstances, the lttng-relayd command, in background or
daemonize mode, will never return as the daemon's "readyness"
will never be signaled.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: report an error if unix socket address is too long
Jérémie Galarneau [Thu, 20 Oct 2016 19:45:13 +0000 (15:45 -0400)] 
Fix: report an error if unix socket address is too long

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove unmaintained TODO file
Jérémie Galarneau [Thu, 20 Oct 2016 18:58:36 +0000 (14:58 -0400)] 
Remove unmaintained TODO file

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove outdated comment about run_as open being broken
Jérémie Galarneau [Thu, 20 Oct 2016 15:53:57 +0000 (11:53 -0400)] 
Remove outdated comment about run_as open being broken

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove run-as compat wrapper from internal code
Jérémie Galarneau [Thu, 20 Oct 2016 15:38:31 +0000 (11:38 -0400)] 
Remove run-as compat wrapper from internal code

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: save: leak of configuration file fd
Jonathan Rajotte [Tue, 18 Oct 2016 22:09:53 +0000 (18:09 -0400)] 
Fix: save: leak of configuration file fd

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoUpdate master version to 2.10.0-pre
Jérémie Galarneau [Fri, 7 Oct 2016 23:17:08 +0000 (19:17 -0400)] 
Update master version to 2.10.0-pre

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: warn when a loaded session can't be set as the default
Jérémie Galarneau [Fri, 7 Oct 2016 21:03:26 +0000 (17:03 -0400)] 
Fix: warn when a loaded session can't be set as the default

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoWarning fix: forward declare struct lttng_ust_calibrate
Jérémie Galarneau [Fri, 7 Oct 2016 20:39:46 +0000 (16:39 -0400)] 
Warning fix: forward declare struct lttng_ust_calibrate

lttng-ust's ust-ctl.h still refers to struct lttng_ust_calibrate
which causes gcc to emit a "‘struct lttng_ust_calibrate’ is
declared inside a parameter list" warning.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agolttng-enable-channel(1): remove redundant --discard from synopsis
Philippe Proulx [Tue, 9 Aug 2016 19:17:25 +0000 (15:17 -0400)] 
lttng-enable-channel(1): remove redundant --discard from synopsis

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agotest: load --override-name
Jonathan Rajotte [Thu, 6 Oct 2016 21:12:38 +0000 (17:12 -0400)] 
test: load --override-name

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoload: introduce --override-name
Jonathan Rajotte [Fri, 7 Oct 2016 16:03:34 +0000 (12:03 -0400)] 
load: introduce --override-name

The --override-name option allow users to override the name of the
session to be loaded using the command-line.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoman: lttng-load fix up
Jonathan Rajotte [Wed, 5 Oct 2016 21:04:33 +0000 (17:04 -0400)] 
man: lttng-load fix up

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoDocs: grammar fix in load.h
Jérémie Galarneau [Fri, 7 Oct 2016 19:04:44 +0000 (15:04 -0400)] 
Docs: grammar fix in load.h

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agolttng_ctl: add session_name to load override
Jonathan Rajotte [Mon, 3 Oct 2016 19:18:42 +0000 (15:18 -0400)] 
lttng_ctl: add session_name to load override

Introduce the override of the session name during the loading of a session.

Can only be used when a session name to be loaded is provided.
Renaming of multiple session is ambiguous.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: test presence of override_attr before accessing its member
Jonathan Rajotte [Mon, 3 Oct 2016 18:57:31 +0000 (14:57 -0400)] 
Fix: test presence of override_attr before accessing its member

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoload: objects returned by getters do not need to be freed
Jonathan Rajotte [Fri, 7 Oct 2016 15:38:28 +0000 (11:38 -0400)] 
load: objects returned by getters do not need to be freed

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove lttng_load_session_attr_get_override_path_url
Jérémie Galarneau [Fri, 7 Oct 2016 16:25:47 +0000 (12:25 -0400)] 
Remove lttng_load_session_attr_get_override_path_url

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoDocs: change order of set functions in load.h to match get
Jérémie Galarneau [Fri, 7 Oct 2016 16:25:21 +0000 (12:25 -0400)] 
Docs: change order of set functions in load.h to match get

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove calibrate documentation
Philippe Proulx [Tue, 14 Jun 2016 23:17:06 +0000 (19:17 -0400)] 
Remove calibrate documentation

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove calibrate from liblttng-ctl
Philippe Proulx [Tue, 14 Jun 2016 23:10:30 +0000 (19:10 -0400)] 
Remove calibrate from liblttng-ctl

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove calibrate from lttng-sessiond
Philippe Proulx [Tue, 14 Jun 2016 22:50:32 +0000 (18:50 -0400)] 
Remove calibrate from lttng-sessiond

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove calibrate from Python bindings
Philippe Proulx [Tue, 14 Jun 2016 22:47:24 +0000 (18:47 -0400)] 
Remove calibrate from Python bindings

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove calibrate from Bash completion script
Philippe Proulx [Tue, 14 Jun 2016 22:44:45 +0000 (18:44 -0400)] 
Remove calibrate from Bash completion script

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove calibrate tests in Python bindings
Philippe Proulx [Tue, 14 Jun 2016 22:44:08 +0000 (18:44 -0400)] 
Remove calibrate tests in Python bindings

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRemove calibrate command from lttng CLI
Philippe Proulx [Tue, 14 Jun 2016 22:43:02 +0000 (18:43 -0400)] 
Remove calibrate command from lttng CLI

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoBuild fix: remove load-42-stream.lttng from dist target
Jérémie Galarneau [Fri, 7 Oct 2016 14:17:26 +0000 (10:17 -0400)] 
Build fix: remove load-42-stream.lttng from dist target

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoTest: load --override-url
Jonathan Rajotte [Mon, 19 Sep 2016 17:34:49 +0000 (13:34 -0400)] 
Test: load --override-url

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoAdd --override-url option to load command
Jonathan Rajotte [Tue, 13 Sep 2016 14:54:23 +0000 (10:54 -0400)] 
Add --override-url option to load command

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoApply the overrides attributes during configuration load
Jonathan Rajotte [Mon, 12 Sep 2016 22:09:09 +0000 (18:09 -0400)] 
Apply the overrides attributes during configuration load

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoClean-up: remove copy-pasted comment from save.c
Jérémie Galarneau [Fri, 7 Oct 2016 03:39:40 +0000 (23:39 -0400)] 
Clean-up: remove copy-pasted comment from save.c

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agolttng-ctl: add override helper to load api
Jonathan Rajotte [Thu, 8 Sep 2016 22:02:51 +0000 (18:02 -0400)] 
lttng-ctl: add override helper to load api

User can provide an url override that will be used during the loading of a
configuration file.

The url format is the same found at lttng-create(1).

This correspond to a --set-url operation on lttng-create.

Note: an url might be invalid for a trace configuration. The override will fail
during the session load (call to lttng_load_session) and simply cancel the
loading.

e.g Loading a live session with a file:// url override will fail.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoRename override to overwrite for config_load_session
Jonathan Rajotte [Fri, 9 Sep 2016 16:37:37 +0000 (12:37 -0400)] 
Rename override to overwrite for config_load_session

This rename is to be consistent with the load API doc and interface.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: report truncation on snprintf
Jonathan Rajotte [Wed, 7 Sep 2016 15:54:40 +0000 (11:54 -0400)] 
Fix: report truncation on snprintf

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: check for a session daemon before running load command
Jérémie Galarneau [Thu, 6 Oct 2016 18:52:19 +0000 (14:52 -0400)] 
Fix: check for a session daemon before running load command

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: ignore SIGPIPE
Mathieu Desnoyers [Thu, 6 Oct 2016 16:57:45 +0000 (12:57 -0400)] 
Fix: ignore SIGPIPE

Issuing fprintf() to stderr (thus write() to the standard error file
descriptor) within the SIGPIPE signal handler is bad: it can trigger
SIGPIPE repeatedly if the listening end has closed its end of the pipe.

Set the SIGPIPE action to SIG_IGN in relayd, sessiond, and consumerd.

This was affecting sessiond and relayd. The consumerd did not print
anything to stderr.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoUse lttng api for the load command
Jonathan Rajotte [Wed, 7 Sep 2016 15:53:06 +0000 (11:53 -0400)] 
Use lttng api for the load command

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: use ssize_type for the return value of uri_parse_str_urls
Jonathan Rajotte [Wed, 7 Sep 2016 15:07:52 +0000 (11:07 -0400)] 
Fix: use ssize_type for the return value of uri_parse_str_urls

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoDocs: grammar fixes in load.h
Jérémie Galarneau [Thu, 6 Oct 2016 15:24:23 +0000 (11:24 -0400)] 
Docs: grammar fixes in load.h

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: wrong api comments for load.h
Jonathan Rajotte [Tue, 6 Sep 2016 18:21:11 +0000 (14:21 -0400)] 
Fix: wrong api comments for load.h

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: do not overwrite ret if already set and session found
Jonathan Rajotte [Tue, 13 Sep 2016 21:17:50 +0000 (17:17 -0400)] 
Fix: do not overwrite ret if already set and session found

Errors were not propagated correctly otherwise.

e.g:
(No sessiond running)
lttng load --all
-> All sessions have been loaded successfully
lttng list show no sessions

With fix the same command output:
Error: No session daemon is available

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agolttng-sessiond: auto-load lttng-probe-i2c module
Simon Marchi [Tue, 4 Oct 2016 22:24:50 +0000 (18:24 -0400)] 
lttng-sessiond: auto-load lttng-probe-i2c module

Automatically load the lttng-probe-i2c kernel module, which was recently
added in lttng-modules, along with the other probe modules.

Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoBump lttng-modules ABI minor version
Mathieu Desnoyers [Wed, 5 Oct 2016 16:54:20 +0000 (12:54 -0400)] 
Bump lttng-modules ABI minor version

Follow lttng-modules upstream.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: handle backward compatibility with lttng-modules 2.7
Mathieu Desnoyers [Wed, 5 Oct 2016 16:54:19 +0000 (12:54 -0400)] 
Fix: handle backward compatibility with lttng-modules 2.7

There is no major version bump between lttng-module 2.7 and 2.8 ABI.
Even though we do not guarantee compatibility, do a best effort to
maintain it when possible.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoClean-up: remove unnecessary autoconf variable substitution
Jérémie Galarneau [Tue, 4 Oct 2016 21:16:01 +0000 (17:16 -0400)] 
Clean-up: remove unnecessary autoconf variable substitution

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoFix: honor negative (unlimited) app socket timeout
Jérémie Galarneau [Tue, 4 Oct 2016 21:00:17 +0000 (17:00 -0400)] 
Fix: honor negative (unlimited) app socket timeout

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoBuild: Replace use of deprecated AM_PATH_XML2
Jérémie Galarneau [Tue, 4 Oct 2016 18:37:57 +0000 (14:37 -0400)] 
Build: Replace use of deprecated AM_PATH_XML2

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoTest fix: set app and network socket timeouts to unlimited
Jérémie Galarneau [Thu, 29 Sep 2016 23:35:01 +0000 (19:35 -0400)] 
Test fix: set app and network socket timeouts to unlimited

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoTest fix: test_fork can hang while waiting for child pids
Jérémie Galarneau [Thu, 29 Sep 2016 04:03:42 +0000 (00:03 -0400)] 
Test fix: test_fork can hang while waiting for child pids

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoTest fix: test_daemon can hang while waiting for child pids
Jérémie Galarneau [Thu, 29 Sep 2016 04:01:06 +0000 (00:01 -0400)] 
Test fix: test_daemon can hang while waiting for child pids

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoTest fix: redirect python test subprocess output to /dev/null
Jérémie Galarneau [Thu, 29 Sep 2016 03:13:19 +0000 (23:13 -0400)] 
Test fix: redirect python test subprocess output to /dev/null

Redirecting to subprocess.PIPE can deadlock when subprocess.wait()
is invoked.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
8 years agoBuild fix: macOS Sierra provides clock_gettime
Jérémie Galarneau [Thu, 29 Sep 2016 00:43:57 +0000 (20:43 -0400)] 
Build fix: macOS Sierra provides clock_gettime

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
This page took 0.044027 seconds and 4 git commands to generate.