RELAYD_BIN="lttng-relayd"
RELAYD_MATCH=".*lttng-relayd.*"
LTTNG_BIN="lttng"
-BABELTRACE_BIN="babeltrace"
+BABELTRACE_BIN="babeltrace2"
OUTPUT_DEST=/dev/null
ERROR_OUTPUT_DEST=/dev/null
+MI_XSD_MAJOR_VERSION=4
+MI_XSD_MINOR_VERSION=1
+MI_XSD_PATH="$TESTDIR/../src/common/mi-lttng-${MI_XSD_MAJOR_VERSION}.${MI_XSD_MINOR_VERSION}.xsd"
+MI_VALIDATE="$TESTDIR/utils/xml-utils/validate_xml ${MI_XSD_PATH}"
+
+XML_PRETTY="$TESTDIR/utils/xml-utils/pretty_xml"
+XML_EXTRACT="$TESTDIR/utils/xml-utils/extract_xml"
+XML_NODE_CHECK="${XML_EXTRACT} -e"
+
+# To match 20201127-175802
+date_time_pattern="[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]-[0-9][0-9][0-9][0-9][0-9][0-9]"
+# The size of a long on this system
+system_long_bit_size=$(getconf LONG_BIT)
# Minimal kernel version supported for session daemon tests
KERNEL_MAJOR_VERSION=2
LTTNG_TEST_TEARDOWN_TIMEOUT=60
fi
-function full_cleanup ()
+# Enable job monitor mode.
+# Here we are mostly interested in the following from the monitor mode:
+# All processes run in a separate process group.
+# This allows us to ensure that all subprocesses from all background tasks are
+# cleaned up correctly using signal to process group id.
+set -m
+
+kill_background_jobs ()
+{
+ local pids
+ pids=$(jobs -p)
+
+ if [ -z "$pids" ]; then
+ # Empty
+ return 0
+ fi
+
+ while read -r pid;
+ do
+ # Use negative number to send the signal to the process group.
+ # This ensure that any subprocesses receive the signal.
+ # /dev/null is used since there is an acceptable race between
+ # the moments the pids are listed and the moment we send a
+ # signal.
+ kill -SIGTERM -- "-$pid" 2>/dev/null
+ done <<< "$pids"
+}
+
+function cleanup ()
{
# Try to kill daemons gracefully
- stop_lttng_relayd_notap SIGTERM $LTTNG_TEST_TEARDOWN_TIMEOUT
- stop_lttng_sessiond_notap SIGTERM $LTTNG_TEST_TEARDOWN_TIMEOUT
+ stop_lttng_relayd_cleanup SIGTERM $LTTNG_TEST_TEARDOWN_TIMEOUT
+ stop_lttng_sessiond_cleanup SIGTERM $LTTNG_TEST_TEARDOWN_TIMEOUT
# If daemons are still present, forcibly kill them
- stop_lttng_relayd_notap SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
- stop_lttng_sessiond_notap SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
- stop_lttng_consumerd_notap SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
-
- # Disable trap for SIGTERM since the following kill to the
- # pidgroup will be SIGTERM. Otherwise it loops.
- # The '-' before the pid number ($$) indicates 'kill' to signal the
- # whole process group.
- trap - SIGTERM && kill -- -$$
+ stop_lttng_relayd_cleanup SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
+ stop_lttng_sessiond_cleanup SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
+ stop_lttng_consumerd_cleanup SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
+
+ kill_background_jobs
+}
+
+function full_cleanup ()
+{
+ cleanup
exit 1
}
+function LTTNG_BAIL_OUT ()
+{
+ cleanup
+ BAIL_OUT "$@"
+}
+
function null_pipes ()
{
exec 0>/dev/null
trap null_pipes SIGPIPE
+# Check pgrep from env, default to pgrep if none
+if [ -z "$PGREP" ]; then
+ PGREP=pgrep
+fi
+
+# Due to the renaming of threads we need to use the full command (pgrep -f) to
+# identify the pids for multiple lttng related processes. The problem with "pgrep
+# -f" is that it ends up also looking at the arguments. We use a two stage
+# lookup. The first one is using "pgrep -f" yielding potential candidate.
+# The second on perform grep on the basename of the first field of the
+# /proc/pid/cmdline of the previously identified pids. The first field
+# correspond to the actual command.
+function lttng_pgrep ()
+{
+ local pattern=$1
+ local possible_pids
+ local full_command_no_argument
+ local command_basename
+
+ possible_pids=$($PGREP -f "$pattern")
+ if [ -z "$possible_pids" ]; then
+ return 0
+ fi
+
+ while IFS= read -r pid ; do
+ # /proc/pid/cmdline is null separated.
+ if full_command_no_argument=$(cut -d '' -f 1 2>/dev/null < /proc/"$pid"/cmdline); then
+ command_basename=$(basename "$full_command_no_argument")
+ if grep -q "$pattern" <<< "$command_basename"; then
+ echo "$pid"
+ fi
+ fi
+ done <<< "$possible_pids"
+ return 0
+}
+
function print_ok ()
{
# Check if we are a terminal
return 0
fi
- BAIL_OUT "LTTng modules not detected."
+ LTTNG_BAIL_OUT "LTTng modules not detected."
+}
+
+# Run the lttng binary.
+#
+# The first two arguments are stdout and stderr redirect paths, respectively.
+# The rest of the arguments are forwarded to the lttng binary
+function _run_lttng_cmd
+{
+ local stdout_dest="$1"
+ local stderr_dest="$2"
+ shift 2
+
+ diag "$TESTDIR/../src/bin/lttng/$LTTNG_BIN $*"
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN "$@" 1> "$stdout_dest" 2> "$stderr_dest"
}
function enable_kernel_lttng_event
chan="-c $channel_name"
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event "$event_name" $chan -s $sess_name -k 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event "$event_name" $chan -s $sess_name -k
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test $ret -ne "0"
chan="-c $channel_name"
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event --syscall "$syscall_name" $chan -s $sess_name -k 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event --syscall "$syscall_name" $chan -s $sess_name -k
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test $ret -ne "0"
chan="-c $channel_name"
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN disable-event --syscall "$syscall_name" $chan -s $sess_name -k 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ disable-event --syscall "$syscall_name" $chan -s $sess_name -k
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
lttng_disable_kernel_syscall 1 "$@"
}
+function lttng_enable_kernel_function_event ()
+{
+ local expected_to_fail="$1"
+ local sess_name="$2"
+ local target="$3"
+ local event_name="$4"
+
+ "$TESTDIR/../src/bin/lttng/$LTTNG_BIN" enable-event --kernel --function="$target" "$event_name" -s "$sess_name" > "$OUTPUT_DEST" 2> "$ERROR_OUTPUT_DEST"
+ ret=$?
+ if [[ $expected_to_fail -eq "1" ]]; then
+ test $ret -ne "0"
+ ok $? "Enable kernel function event for session $sess_name failed as expected"
+ else
+ ok $ret "Enable kernel function event for session $sess_name"
+ fi
+}
+
+function lttng_enable_kernel_function_event_ok ()
+{
+ lttng_enable_kernel_function_event 0 "$@"
+}
+
function lttng_enable_kernel_userspace_probe_event ()
{
local expected_to_fail="$1"
local channel_name=$4
local opts="${@:5}"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-channel -k $channel_name -s $sess_name $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-channel -k $channel_name -s $sess_name $opts
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
local sess_name=$2
local channel_name=$3
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN disable-channel -k $channel_name -s $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ disable-channel -k $channel_name -s $sess_name
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
DIR=$(readlink -f "$TESTDIR")
- if [ -z $(pgrep $RELAYD_MATCH) ]; then
+ if [ -z $(lttng_pgrep "$RELAYD_MATCH") ]; then
# shellcheck disable=SC2086
$DIR/../src/bin/lttng-relayd/$RELAYD_BIN $process_mode $opt 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
#$DIR/../src/bin/lttng-relayd/$RELAYD_BIN $opt -vvv >>/tmp/relayd.log 2>&1 &
function stop_lttng_relayd_opt()
{
local withtap=$1
- local signal=$2
+ local is_cleanup=$2
+ local signal=$3
+ local timeout_s=$4
+ local dtimeleft_s=
+ local retval=0
+ local pids
if [ -z "$signal" ]; then
signal="SIGTERM"
fi
- local timeout_s=$3
- local dtimeleft_s=
# Multiply time by 2 to simplify integer arithmetic
if [ -n "$timeout_s" ]; then
dtimeleft_s=$((timeout_s * 2))
fi
- local retval=0
- local pids=
- pids=$(pgrep "$RELAYD_MATCH")
+ pids=$(lttng_pgrep "$RELAYD_MATCH")
if [ -z "$pids" ]; then
- if [ "$withtap" -eq "1" ]; then
- pass "No relay daemon to kill"
+ if [ "$is_cleanup" -eq 1 ]; then
+ :
+ elif [ "$withtap" -eq "1" ]; then
+ fail "No relay daemon to kill"
+ else
+ LTTNG_BAIL_OUT "No relay daemon to kill"
fi
return 0
fi
else
out=1
while [ -n "$out" ]; do
- out=$(pgrep "$RELAYD_MATCH")
+ out=$(lttng_pgrep "$RELAYD_MATCH")
if [ -n "$dtimeleft_s" ]; then
if [ $dtimeleft_s -lt 0 ]; then
out=
function stop_lttng_relayd()
{
- stop_lttng_relayd_opt 1 "$@"
+ stop_lttng_relayd_opt 1 0 "$@"
}
function stop_lttng_relayd_notap()
{
- stop_lttng_relayd_opt 0 "$@"
+ stop_lttng_relayd_opt 0 0 "$@"
+}
+
+function stop_lttng_relayd_cleanup()
+{
+ stop_lttng_relayd_opt 0 1 "$@"
}
#First arg: show tap output
local withtap=$1
local load_path=$2
+ # The rest of the arguments will be passed directly to lttng-sessiond.
+ shift 2
+
local env_vars=""
local consumerd=""
if ! validate_kernel_version; then
fail "Start session daemon"
- BAIL_OUT "*** Kernel too old for session daemon tests ***"
+ LTTNG_BAIL_OUT "*** Kernel too old for session daemon tests ***"
fi
- : "${LTTNG_SESSION_CONFIG_XSD_PATH="${DIR}/../src/common/config/"}"
+ diag "export LTTNG_SESSION_CONFIG_XSD_PATH=${DIR}/../src/common/"
+ : "${LTTNG_SESSION_CONFIG_XSD_PATH="${DIR}/../src/common/"}"
export LTTNG_SESSION_CONFIG_XSD_PATH
- if [ -z "$(pgrep "${SESSIOND_MATCH}")" ]; then
+ if [ -z "$(lttng_pgrep "${SESSIOND_MATCH}")" ]; then
# Have a load path ?
if [ -n "$load_path" ]; then
+ diag "env $env_vars --load $load_path --background $consumerd $@"
# shellcheck disable=SC2086
- env $env_vars --load "$load_path" --background "$consumerd"
+ env $env_vars --load "$load_path" --background "$consumerd" "$@"
else
+ diag "env $env_vars --background $consumerd $@"
# shellcheck disable=SC2086
- env $env_vars --background "$consumerd"
+ env $env_vars --background "$consumerd" "$@"
fi
#$DIR/../src/bin/lttng-sessiond/$SESSIOND_BIN --background --consumerd32-path="$DIR/../src/bin/lttng-consumerd/lttng-consumerd" --consumerd64-path="$DIR/../src/bin/lttng-consumerd/lttng-consumerd" --verbose-consumer >>/tmp/sessiond.log 2>&1
status=$?
function stop_lttng_sessiond_opt()
{
local withtap=$1
- local signal=$2
+ local is_cleanup=$2
+ local signal=$3
+ local timeout_s=$4
+ local dtimeleft_s=
+ local retval=0
+ local runas_pids
+ local pids
if [ -z "$signal" ]; then
signal=SIGTERM
fi
- local timeout_s=$3
- local dtimeleft_s=
-
# Multiply time by 2 to simplify integer arithmetic
if [ -n "$timeout_s" ]; then
dtimeleft_s=$((timeout_s * 2))
return 0
fi
- local retval=0
-
- local runas_pids=
- runas_pids=$(pgrep "$RUNAS_MATCH")
-
- local pids=
- pids=$(pgrep "$SESSIOND_MATCH")
+ runas_pids=$(lttng_pgrep "$RUNAS_MATCH")
+ pids=$(lttng_pgrep "$SESSIOND_MATCH")
if [ -n "$runas_pids" ]; then
pids="$pids $runas_pids"
fi
if [ -z "$pids" ]; then
- if [ "$withtap" -eq "1" ]; then
- pass "No session daemon to kill"
+ if [ "$is_cleanup" -eq 1 ]; then
+ :
+ elif [ "$withtap" -eq "1" ]; then
+ fail "No session daemon to kill"
+ else
+ LTTNG_BAIL_OUT "No session daemon to kill"
fi
return 0
fi
else
out=1
while [ -n "$out" ]; do
- out=$(pgrep "${SESSIOND_MATCH}")
+ out=$(lttng_pgrep "${SESSIOND_MATCH}")
if [ -n "$dtimeleft_s" ]; then
if [ $dtimeleft_s -lt 0 ]; then
out=
done
out=1
while [ -n "$out" ]; do
- out=$(pgrep "$CONSUMERD_MATCH")
+ out=$(lttng_pgrep "$CONSUMERD_MATCH")
if [ -n "$dtimeleft_s" ]; then
if [ $dtimeleft_s -lt 0 ]; then
out=
if [ -n "$modules" ]; then
diag "Unloading all LTTng modules"
- modprobe -r "$modules"
+ modprobe --remove "$modules"
fi
fi
fi
function stop_lttng_sessiond()
{
- stop_lttng_sessiond_opt 1 "$@"
+ stop_lttng_sessiond_opt 1 0 "$@"
}
function stop_lttng_sessiond_notap()
{
- stop_lttng_sessiond_opt 0 "$@"
+ stop_lttng_sessiond_opt 0 0 "$@"
+}
+
+function stop_lttng_sessiond_cleanup()
+{
+ stop_lttng_sessiond_opt 0 1 "$@"
}
function sigstop_lttng_sessiond_opt()
{
local withtap=$1
local signal=SIGSTOP
+ local pids
if [ -n "$TEST_NO_SESSIOND" ] && [ "$TEST_NO_SESSIOND" == "1" ]; then
# Env variable requested no session daemon
return
fi
- PID_SESSIOND="$(pgrep "${SESSIOND_MATCH}") $(pgrep "$RUNAS_MATCH")"
+ pids="$(lttng_pgrep "${SESSIOND_MATCH}") $(lttng_pgrep "$RUNAS_MATCH")"
if [ "$withtap" -eq "1" ]; then
- diag "Sending SIGSTOP to lt-$SESSIOND_BIN and $SESSIOND_BIN pids: $(echo "$PID_SESSIOND" | tr '\n' ' ')"
+ diag "Sending SIGSTOP to lt-$SESSIOND_BIN and $SESSIOND_BIN pids: $(echo "$pids" | tr '\n' ' ')"
fi
# shellcheck disable=SC2086
- if ! kill -s $signal $PID_SESSIOND 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST; then
+ if ! kill -s $signal $pids 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST; then
if [ "$withtap" -eq "1" ]; then
fail "Sending SIGSTOP to session daemon"
fi
else
out=1
while [ $out -ne 0 ]; do
- pid="$(pgrep "$SESSIOND_MATCH")"
+ pids="$(lttng_pgrep "$SESSIOND_MATCH")"
# Wait until state becomes stopped for session
# daemon(s).
out=0
- for sessiond_pid in $pid; do
+ for sessiond_pid in $pids; do
state="$(ps -p "$sessiond_pid" -o state= )"
if [[ -n "$state" && "$state" != "T" ]]; then
out=1
function stop_lttng_consumerd_opt()
{
local withtap=$1
- local signal=$2
+ local is_cleanup=$2
+ local signal=$3
+ local timeout_s=$4
+ local dtimeleft_s=
+ local retval=0
+ local pids
if [ -z "$signal" ]; then
signal=SIGTERM
fi
- local timeout_s=$3
- local dtimeleft_s=
-
# Multiply time by 2 to simplify integer arithmetic
if [ -n "$timeout_s" ]; then
dtimeleft_s=$((timeout_s * 2))
fi
- local retval=0
-
- PID_CONSUMERD="$(pgrep "$CONSUMERD_MATCH")"
+ pids="$(lttng_pgrep "$CONSUMERD_MATCH")"
- if [ -z "$PID_CONSUMERD" ]; then
- if [ "$withtap" -eq "1" ]; then
- pass "No consumer daemon to kill"
+ if [ -z "$pids" ]; then
+ if [ "$is_cleanup" -eq 1 ]; then
+ :
+ elif [ "$withtap" -eq "1" ]; then
+ fail "No consumerd daemon to kill"
+ else
+ LTTNG_BAIL_OUT "No consumerd daemon to kill"
fi
return 0
fi
- diag "Killing (signal $signal) $CONSUMERD_BIN pids: $(echo "$PID_CONSUMERD" | tr '\n' ' ')"
+ diag "Killing (signal $signal) $CONSUMERD_BIN pids: $(echo "$pids" | tr '\n' ' ')"
# shellcheck disable=SC2086
- if ! kill -s $signal $PID_CONSUMERD 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST; then
+ if ! kill -s $signal $pids 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST; then
retval=1
if [ "$withtap" -eq "1" ]; then
fail "Kill consumer daemon"
else
out=1
while [ $out -ne 0 ]; do
- pid="$(pgrep "$CONSUMERD_MATCH")"
+ pids="$(lttng_pgrep "$CONSUMERD_MATCH")"
# If consumerds are still present check their status.
# A zombie status qualifies the consumerd as *killed*
out=0
- for consumer_pid in $pid; do
+ for consumer_pid in $pids; do
state="$(ps -p "$consumer_pid" -o state= )"
if [[ -n "$state" && "$state" != "Z" ]]; then
out=1
function stop_lttng_consumerd()
{
- stop_lttng_consumerd_opt 1 "$@"
+ stop_lttng_consumerd_opt 1 0 "$@"
}
function stop_lttng_consumerd_notap()
{
- stop_lttng_consumerd_opt 0 "$@"
+ stop_lttng_consumerd_opt 0 0 "$@"
+}
+
+function stop_lttng_consumerd_cleanup()
+{
+ stop_lttng_consumerd_opt 0 1 "$@"
}
function sigstop_lttng_consumerd_opt()
{
local withtap=$1
local signal=SIGSTOP
+ local pids
- PID_CONSUMERD="$(pgrep "$CONSUMERD_MATCH")"
+ pids="$(lttng_pgrep "$CONSUMERD_MATCH")"
- diag "Sending SIGSTOP to $CONSUMERD_BIN pids: $(echo "$PID_CONSUMERD" | tr '\n' ' ')"
+ diag "Sending SIGSTOP to $CONSUMERD_BIN pids: $(echo "$pids" | tr '\n' ' ')"
# shellcheck disable=SC2086
- kill -s $signal $PID_CONSUMERD 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ kill -s $signal $pids 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
retval=$?
if [ $retval -eq 1 ]; then
else
out=1
while [ $out -ne 0 ]; do
- pid="$(pgrep "$CONSUMERD_MATCH")"
+ pids="$(lttng_pgrep "$CONSUMERD_MATCH")"
# Wait until state becomes stopped for all
# consumers.
out=0
- for consumer_pid in $pid; do
+ for consumer_pid in $pids; do
state="$(ps -p "$consumer_pid" -o state= )"
if [[ -n "$state" && "$state" != "T" ]]; then
out=1
function list_lttng_with_opts ()
{
+ local ret
+ local withtap=$1
+ shift
local opts=$1
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN list $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
- ok $? "Lttng-tool list command with option $opts"
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ list $opts
+ ret=$?
+ if [ $withtap -eq "1" ]; then
+ ok $ret "Lttng-tool list command with option $opts"
+ fi
+}
+
+function list_lttng_ok ()
+{
+ list_lttng_with_opts 1 "$@"
+}
+
+function list_lttng_notap ()
+{
+ list_lttng_with_opts 0 "$@"
}
function create_lttng_session_no_output ()
local sess_name=$1
local opts="${@:2}"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN create $sess_name --no-output $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ create $sess_name --no-output $opts
ok $? "Create session $sess_name in no-output mode"
}
local uri=$2
local opts="${@:3}"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN create $sess_name -U $uri $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ create $sess_name -U $uri $opts
ok $? "Create session $sess_name with uri:$uri and opts: $opts"
}
trace_path="-o $trace_path"
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN create "$sess_name" $trace_path $opt 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ create "$sess_name" $trace_path $opt
ret=$?
if [ $expected_to_fail -eq "1" ]; then
test "$ret" -ne "0"
local channel_name=$4
local opts="${@:5}"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-channel -u $channel_name -s $sess_name $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-channel -u $channel_name -s $sess_name $opts
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
local sess_name=$1
local channel_name=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN disable-channel -u $channel_name -s $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ disable-channel -u $channel_name -s $sess_name
ok $? "Disable channel $channel_name for session $sess_name"
}
local sess_name=$1
local channel_name=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-channel -s $sess_name $channel_name -k --output mmap --overwrite 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-channel -s $sess_name $channel_name -k --output mmap --overwrite
ok $? "Enable channel $channel_name for session $sess_name"
}
local sess_name=$1
local channel_name=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-channel -s $sess_name $channel_name -k --output mmap --discard --subbuf-size=$(getconf PAGE_SIZE) --num-subbuf=2 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-channel -s $sess_name $channel_name -k --output mmap --discard --subbuf-size=$(getconf PAGE_SIZE) --num-subbuf=2
ok $? "Enable small discard channel $channel_name for session $sess_name"
}
local sess_name=$1
local channel_name=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-channel -s $sess_name $channel_name -k --output mmap --overwrite --subbuf-size=$(getconf PAGE_SIZE) --num-subbuf=2 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-channel -s $sess_name $channel_name -k --output mmap --overwrite --subbuf-size=$(getconf PAGE_SIZE) --num-subbuf=2
ok $? "Enable small discard channel $channel_name for session $sess_name"
}
local sess_name=$1
local channel_name=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-channel -s $sess_name $channel_name -u --output mmap --overwrite 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-channel -s $sess_name $channel_name -u --output mmap --overwrite
ok $? "Enable channel $channel_name for session $sess_name"
}
chan="-c $channel_name"
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event "$event_name" $chan -s $sess_name -u 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event "$event_name" $chan -s "$sess_name" -u
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test $ret -ne "0"
chan="-c $channel_name"
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event "$event_name" $chan -s $sess_name -j 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event "$event_name" $chan -s $sess_name -j
ok $? "Enable JUL event $event_name for session $sess_name"
}
chan="-c $channel_name"
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event --loglevel $loglevel "$event_name" $chan -s $sess_name -j 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event --loglevel $loglevel "$event_name" $chan -s $sess_name -j
ok $? "Enable JUL event $event_name for session $sess_name with loglevel $loglevel"
}
function enable_log4j_lttng_event()
{
- sess_name=$1
- event_name="$2"
- channel_name=$3
+ local sess_name=$1
+ local event_name=$2
+ local channel_name=$3
- if [ -z $channel_name ]; then
- # default channel if none specified
- chan=""
- else
- chan="-c $channel_name"
+ local chan_opt=()
+
+ # default channel if none specified
+ if [ -n "$channel_name" ]; then
+ chan_opt=("-c" "$channel_name")
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event "$event_name" $chan -s $sess_name -l 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
- ok $? "Enable LOG4J event $event_name for session $sess_name"
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event "$event_name" "${chan_opt[@]}" -s "$sess_name" --log4j
+ ok $? "Enable LOG4J event '$event_name' for session '$sess_name'"
+}
+
+function enable_log4j_lttng_event_filter()
+{
+ local sess_name=$1
+ local event_name=$2
+ local filter=$3
+
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event "$event_name" -s "$sess_name" --log4j --filter "$filter"
+ ok $? "Enable LOG4J event '$event_name' with filter '$filter' for session '$sess_name'"
+}
+
+function enable_log4j_lttng_event_filter_loglevel_only()
+{
+ local sess_name=$1
+ local event_name=$2
+ local filter=$3
+ local loglevel=$4
+
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event --loglevel-only "$loglevel" "$event_name" -s "$sess_name" -l --filter "$filter"
+ ok $? "Enable LOG4J event '$event_name' with filter '$filter' and loglevel-only '$loglevel' for session '$sess_name'"
}
function enable_log4j_lttng_event_loglevel()
{
local sess_name=$1
- local event_name="$2"
+ local event_name=$2
local loglevel=$3
local channel_name=$4
- if [ -z $channel_name ]; then
- # default channel if none specified
- chan=""
- else
- chan="-c $channel_name"
+
+ # default channel if none specified
+ if [ -n "$channel_name" ]; then
+ chan_opt=("-c" "$channel_name")
+ fi
+
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event --loglevel "$loglevel" "$event_name" "${chan_opt[@]}" -s "$sess_name" --log4j
+ ok $? "Enable LOG4J event '$event_name' for session '$sess_name' with loglevel '$loglevel'"
+}
+
+function enable_log4j_lttng_event_loglevel_only()
+{
+ local sess_name=$1
+ local event_name=$2
+ local loglevel=$3
+ local channel_name=$4
+
+ local chan_opt=()
+
+ # default channel if none specified
+ if [ -n "$channel_name" ]; then
+ chan_opt=("-c" "$channel_name")
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event --loglevel $loglevel "$event_name" $chan -s $sess_name -l 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
- ok $? "Enable LOG4J event $event_name for session $sess_name with loglevel $loglevel"
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event --loglevel-only "$loglevel" "$event_name" "${chan_opt[@]}" -s "$sess_name" --log4j
+ ok $? "Enable LOG4J event '$event_name' for session '$sess_name' with loglevel-only '$loglevel'"
}
function enable_python_lttng_event()
chan="-c $channel_name"
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event "$event_name" $chan -s $sess_name -p 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event "$event_name" $chan -s $sess_name -p
ok $? "Enable Python event $event_name for session $sess_name"
}
chan="-c $channel_name"
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event --loglevel $loglevel "$event_name" $chan -s $sess_name -p 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event --loglevel $loglevel "$event_name" $chan -s $sess_name -p
ok $? "Enable Python event $event_name for session $sess_name with loglevel $loglevel"
}
local sess_name="$1"
local event_name="$2"
local filter="$3"
+ local channel_name=$4
+
+ if [ -z $channel_name ]; then
+ # default channel if none specified
+ chan=""
+ else
+ chan="-c $channel_name"
+ fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event "$event_name" -s $sess_name -u --filter "$filter" 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event $chan "$event_name" -s $sess_name -u --filter "$filter"
ok $? "Enable event $event_name with filtering for session $sess_name"
}
local event_name="$2"
local loglevel="$3"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event "$event_name" -s $sess_name -u --loglevel $loglevel 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event "$event_name" -s $sess_name -u --loglevel $loglevel
ok $? "Enable event $event_name with loglevel $loglevel"
}
local event_name="$2"
local loglevel="$3"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event "$event_name" -s $sess_name -u --loglevel-only $loglevel 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-event "$event_name" -s $sess_name -u --loglevel-only $loglevel
ok $? "Enable event $event_name with loglevel-only $loglevel"
}
chan="-c $channel_name"
fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN disable-event "$event_name" -s $sess_name $chan -u 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ disable-event "$event_name" -s $sess_name $chan -u
ok $? "Disable event $event_name for session $sess_name"
}
local sess_name="$1"
local event_name="$2"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN disable-event "$event_name" -s $sess_name -l >/dev/null 2>&1
- ok $? "Disable LOG4J event $event_name for session $sess_name"
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ disable-event "$event_name" -s "$sess_name" --log4j
+ ok $? "Disable LOG4J event '$event_name' for session '$sess_name'"
}
function disable_python_lttng_event ()
local sess_name="$1"
local event_name="$2"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN disable-event "$event_name" -s $sess_name -p 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ disable-event "$event_name" -s $sess_name -p
ok $? "Disable Python event $event_name for session $sess_name"
}
local expected_to_fail=$2
local sess_name=$3
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN start $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ start $sess_name
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
local expected_to_fail=$2
local sess_name=$3
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN stop $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ stop $sess_name
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
local expected_to_fail=$2
local sess_name=$3
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN destroy $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ destroy $sess_name
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
function destroy_lttng_sessions ()
{
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN destroy --all 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ destroy --all
ok $? "Destroy all lttng sessions"
}
local trace_path=$3
local opts=$4
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN snapshot add-output -s $sess_name $trace_path $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ snapshot add-output -s $sess_name $trace_path $opts
ret=$?
if [[ $expected_to_fail -eq 1 ]]; then
test "$ret" -ne "0"
local sess_name=$2
local id=$3
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN snapshot del-output -s $sess_name $id 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ snapshot del-output -s $sess_name $id
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
function lttng_snapshot_record ()
{
local sess_name=$1
+ local trace_path=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN snapshot record -s $sess_name $trace_path 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ snapshot record -s "$sess_name" "$trace_path"
ok $? "Snapshot recorded"
}
function lttng_snapshot_list ()
{
local sess_name=$1
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN snapshot list-output -s $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ snapshot list-output -s $sess_name
ok $? "Snapshot list"
}
local sess_name=$1
local opts=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN save $sess_name $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ save $sess_name $opts
ok $? "Session saved"
}
local expected_to_fail=$1
local opts=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN load $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ load $opts
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test $ret -ne "0"
function lttng_add_context_list()
{
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN add-context --list 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ add-context --list
ret=$?
ok $ret "Context listing"
}
local channel_name="$4"
local type="$5"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN add-context -s $session_name -c $channel_name -t $type $domain 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ add-context -s $session_name -c $channel_name -t $type $domain
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test $ret -ne "0"
pass "Waiting for live viewers on url: $url"
}
+function bail_out_if_no_babeltrace()
+{
+ which "$BABELTRACE_BIN" >/dev/null
+ if [ $? -ne 0 ]; then
+ LTTNG_BAIL_OUT "\"$BABELTRACE_BIN\" binary not found. Skipping tests"
+ fi
+}
+
function validate_metadata_event ()
{
local event_name=$1
local nr_event_id=$2
local trace_path=$3
- local metadata_file=$(find $trace_path | grep metadata)
+ local metadata_file=$(find $trace_path -name "metadata")
local metadata_path=$(dirname $metadata_file)
- which $BABELTRACE_BIN >/dev/null
- skip $? -ne 0 "Babeltrace binary not found. Skipping trace matches"
+ bail_out_if_no_babeltrace
local count=$($BABELTRACE_BIN --output-format=ctf-metadata $metadata_path | grep $event_name | wc -l)
if [ "$count" -ne "$nr_event_id" ]; then
- fail "Metadata match with the metadata of $count event(s) named $event_name"
- diag "$count matching event id found in metadata"
+ fail "Metadata match with the metadata of $nr_event_id event(s) named $event_name"
+ diag "$count matching event names found in metadata"
else
- pass "Metadata match with the metadata of $count event(s) named $event_name"
+ pass "Metadata match with the metadata of $nr_event_id event(s) named $event_name"
fi
}
local nr_iter=$2
local trace_path=$3
- which $BABELTRACE_BIN >/dev/null
- skip $? -ne 0 "Babeltrace binary not found. Skipping trace matches"
+ bail_out_if_no_babeltrace
local count=$($BABELTRACE_BIN $trace_path | grep $event_name | wc -l)
local nr_iter=$2
local trace_path=$3
- which $BABELTRACE_BIN >/dev/null
- skip $? -ne 0 "Babeltrace binary not found. Skipping trace matches"
+ bail_out_if_no_babeltrace
+ #which "$BABELTRACE_BIN" >/dev/null
+ #skip $? -ne 0 "\"$BABELTRACE_BIN\" binary not found. Skipping trace comparison"
local count=$($BABELTRACE_BIN $trace_path | grep $event_name | wc -l)
local total=$($BABELTRACE_BIN $trace_path | wc -l)
local event_name=$1
local trace_path=$2
- which $BABELTRACE_BIN >/dev/null
- if [ $? -ne 0 ]; then
- skip 0 "Babeltrace binary not found. Skipping trace validation"
- fi
+ bail_out_if_no_babeltrace
OLDIFS=$IFS
IFS=","
pass "Validate trace for event $i, $traced events"
else
fail "Validate trace for event $i"
- diag "Found $traced occurences of $i"
+ diag "Found $traced occurrences of $i"
fi
done
ret=$?
local trace_path=$2
local expected_count=$3
- which $BABELTRACE_BIN >/dev/null
- if [ $? -ne 0 ]; then
- skip 0 "Babeltrace binary not found. Skipping trace validation"
- fi
+ bail_out_if_no_babeltrace
cnt=0
OLDIFS=$IFS
pass "Validate trace for event $i, $traced events"
else
fail "Validate trace for event $i"
- diag "Found $traced occurences of $i"
+ diag "Found $traced occurrences of $i"
fi
cnt=$(($cnt + $traced))
done
local expected_min=$3
local expected_max=$4
- which $BABELTRACE_BIN >/dev/null
- if [ $? -ne 0 ]; then
- skip 0 "Babeltrace binary not found. Skipping trace validation"
- fi
+ bail_out_if_no_babeltrace
cnt=0
OLDIFS=$IFS
pass "Validate trace for event $i, $traced events"
else
fail "Validate trace for event $i"
- diag "Found $traced occurences of $i"
+ diag "Found $traced occurrences of $i"
fi
cnt=$(($cnt + $traced))
done
{
local trace_path=$1
- which $BABELTRACE_BIN >/dev/null
- if [ $? -ne 0 ]; then
- skip 0 "Babeltrace binary not found. Skipping trace validation"
- fi
-
$BABELTRACE_BIN $trace_path 2>/dev/null | head -n 1
}
local event_exp=$1
local trace_path=$2
- which $BABELTRACE_BIN >/dev/null
- skip $? -ne 0 "Babeltrace binary not found. Skipping trace validation"
+ bail_out_if_no_babeltrace
traced=$($BABELTRACE_BIN $trace_path 2>/dev/null | grep --extended-regexp ${event_exp} | wc -l)
if [ "$traced" -ne 0 ]; then
pass "Validate trace for expression '${event_exp}', $traced events"
else
fail "Validate trace for expression '${event_exp}'"
- diag "Found $traced occurences of '${event_exp}'"
+ diag "Found $traced occurrences of '${event_exp}'"
fi
ret=$?
return $ret
local event_exp=$1
local trace_path=$2
- which $BABELTRACE_BIN >/dev/null
- skip $? -ne 0 "Babeltrace binary not found. Skipping trace matches"
+ bail_out_if_no_babeltrace
local count=$($BABELTRACE_BIN $trace_path | grep --extended-regexp ${event_exp} | wc -l)
local total=$($BABELTRACE_BIN $trace_path | wc -l)
{
local trace_path=$1
- which $BABELTRACE_BIN >/dev/null
- if [ $? -ne 0 ]; then
- skip 0 "Babeltrace binary not found. Skipping trace validation"
- fi
+ bail_out_if_no_babeltrace
events=$($BABELTRACE_BIN $trace_path 2>/dev/null)
ret=$?
local expected_to_fail=$1
local sess_name=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN regenerate metadata -s $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ regenerate metadata -s $sess_name
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
local expected_to_fail=$1
local sess_name=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN regenerate statedump -s $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ regenerate statedump -s $sess_name
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
local expected_to_fail=$1
local sess_name=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN rotate $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ rotate $sess_name
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
function destructive_tests_enabled ()
{
- if [ ${LTTNG_ENABLE_DESTRUCTIVE_TESTS} = "will-break-my-system" ]; then
+ if [ "$LTTNG_ENABLE_DESTRUCTIVE_TESTS" = "will-break-my-system" ]; then
return 0
else
return 1
local sess_name=$2
local period=$3
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-rotation -s $sess_name --timer $period 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-rotation -s $sess_name --timer $period
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
local sess_name=$2
local size=$3
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-rotation -s $sess_name --size $size 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ enable-rotation -s $sess_name --size $size
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
local expected_to_fail=$1
local sess_name=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN clear $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ clear $sess_name
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
function lttng_clear_all ()
{
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN clear --all 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ _run_lttng_cmd "$OUTPUT_DEST" "$ERROR_OUTPUT_DEST" \
+ clear --all
ok $? "Clear all lttng sessions"
}
+
+function lttng_add_trigger()
+{
+ local expected_to_fail="$1"
+ local trigger_name="$2"
+ shift 2
+ local args=("$@")
+
+ diag "$TESTDIR/../src/bin/lttng/$LTTNG_BIN add-trigger --name $trigger_name ${args[*]}"
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN add-trigger --name "$trigger_name" "${args[@]}" 1> /dev/null 2> /dev/null
+ ret=$?
+ if [[ $expected_to_fail -eq "1" ]]; then
+ test "$ret" -ne "0"
+ ok $? "Add trigger $trigger_name failed as expected"
+ else
+ ok $ret "Add trigger $trigger_name"
+ fi
+}
+
+function lttng_remove_trigger()
+{
+ local expected_to_fail="$1"
+ local trigger_name="$2"
+ shift 2
+
+ diag "$TESTDIR/../src/bin/lttng/$LTTNG_BIN remove-trigger $trigger_name $*"
+ "$TESTDIR/../src/bin/lttng/$LTTNG_BIN" remove-trigger "$trigger_name" "$@" 1> /dev/null 2> /dev/null
+ ret=$?
+ if [[ $expected_to_fail -eq "1" ]]; then
+ test "$ret" -ne "0"
+ ok $? "Remove trigger $trigger_name failed as expected"
+ else
+ ok $ret "Remove trigger $trigger_name"
+ fi
+}
+
+function lttng_add_trigger_ok()
+{
+ lttng_add_trigger 0 "$@"
+}
+
+function lttng_add_trigger_fail()
+{
+ lttng_add_trigger 1 "$@"
+}
+
+function lttng_remove_trigger_ok()
+{
+ lttng_remove_trigger 0 "$@"
+}
+
+function list_triggers_matches_ok ()
+{
+ local tmp_stdout=$(mktemp --tmpdir -t "tmp.${FUNCNAME[0]}_stdout.XXXXXX")
+ local tmp_stderr=$(mktemp --tmpdir -t "tmp.${FUNCNAME[0]}_stderr.XXXXXX")
+
+ local test_name="$1"
+ local expected_stdout_file="$2"
+
+ diag "$TESTDIR/../src/bin/lttng/$LTTNG_BIN list-triggers"
+
+ "$TESTDIR/../src/bin/lttng/$LTTNG_BIN" list-triggers > "${tmp_stdout}" 2> "${tmp_stderr}"
+ ok $? "${test_name}: exit code is 0"
+
+ diff -u "${expected_stdout_file}" "${tmp_stdout}"
+ ok $? "${test_name}: expected stdout"
+
+ diff -u /dev/null "${tmp_stderr}"
+ ok $? "${test_name}: expected stderr"
+
+ rm -f "${tmp_stdout}"
+ rm -f "${tmp_stderr}"
+}
+
+function list_triggers_matches_mi_ok ()
+{
+ local tmp_stdout
+ local tmp_stdout_raw
+ local tmp_stderr
+
+ local test_name="$1"
+ local expected_stdout_file="$2"
+
+ tmp_stdout_raw=$(mktemp --tmpdir -t "tmp.${FUNCNAME[0]}_stdout.XXXXXX")
+ tmp_stdout=$(mktemp --tmpdir -t "tmp.${FUNCNAME[0]}_stdout.XXXXXX")
+ tmp_stderr=$(mktemp --tmpdir -t "tmp.${FUNCNAME[0]}_stderr.XXXXXX")
+
+ diag "$TESTDIR/../src/bin/lttng/$LTTNG_BIN --mi xml list-triggers"
+
+ "$TESTDIR/../src/bin/lttng/$LTTNG_BIN" --mi=xml list-triggers > "${tmp_stdout_raw}" 2> "${tmp_stderr}"
+ ok $? "${test_name}: exit code is 0"
+
+ # Pretty-fy xml before further test.
+ $XML_PRETTY < "${tmp_stdout_raw}" > "${tmp_stdout}"
+
+ $MI_VALIDATE "${tmp_stdout}"
+ ok $? "list-trigger mi is valid"
+
+ diff -u "${expected_stdout_file}" "${tmp_stdout}"
+ ok $? "${test_name}: expected stdout"
+
+ diff -u /dev/null "${tmp_stderr}"
+ ok $? "${test_name}: expected stderr"
+
+ rm -f "${tmp_stdout}"
+ rm -f "${tmp_stdout_raw}"
+ rm -f "${tmp_stderr}"
+}
+
+function validate_path_pattern ()
+{
+ local message=$1
+ local pattern=$2
+ # Base path is only used in error case and is used to list the content
+ # of the base path.
+ local base_path=$3
+
+
+ [ -f $pattern ]
+ ret=$?
+ ok $ret "$message"
+
+ if [ "$ret" -ne "0" ]; then
+ diag "Path pattern expected: $pattern"
+ # List the tracepath for more info. We use find as a recursive
+ # directory lister.
+ diag "The base path content:"
+ find "$base_path" -print
+ fi
+}
+
+function validate_trace_path_ust_uid ()
+{
+ local trace_path=$1
+ local session_name=$2
+ local uid=$UID
+ local pattern="$trace_path/$session_name-$date_time_pattern/ust/uid/$uid/${system_long_bit_size}-bit/metadata"
+
+ validate_path_pattern "UST per-uid trace path is valid" "$pattern" "$trace_path"
+}
+
+function validate_trace_path_ust_uid_network ()
+{
+ local trace_path=$1
+ local session_name=$2
+ local base_path=$3
+ local uid=$UID
+ local hostname=$HOSTNAME
+ local pattern
+ local ret
+
+ # If the session was given a network base path (e.g
+ # 127.0.0.1/my/custom/path on creation, there is no session name
+ # component to the path on the relayd side. Caller can simply not pass a
+ # session name for this scenario.
+ if [ -n "$session_name" ]; then
+ session_name="$session_name-$date_time_pattern"
+ if [ -n "$base_path" ]; then
+ fail "Session name and base path are mutually exclusive"
+ return
+ fi
+ fi
+
+ pattern="$trace_path/$hostname/$base_path/$session_name/ust/uid/$uid/${system_long_bit_size}-bit/metadata"
+
+ validate_path_pattern "UST per-uid network trace path is valid" "$pattern" "$trace_path"
+}
+
+function validate_trace_path_ust_uid_snapshot_network ()
+{
+ local trace_path=$1
+ local session_name=$2
+ local snapshot_name=$3
+ local snapshot_number=$4
+ local base_path=$5
+ local hostname=$HOSTNAME
+ local uid=$UID
+ local pattern
+ local ret
+
+ # If the session/output was given a network base path (e.g
+ # 127.0.0.1/my/custom/path on creation, there is no session name
+ # component to the path on the relayd side. Caller can simply not pass a
+ # session name for this scenario.
+ if [ -n "$session_name" ]; then
+ session_name="$session_name-$date_time_pattern"
+ if [ -n "$base_path" ]; then
+ fail "Session name and base path are mutually exclusive"
+ return
+ fi
+ fi
+
+ pattern="$trace_path/$hostname/$base_path/$session_name/$snapshot_name-$date_time_pattern-$snapshot_number/ust/uid/$uid/${system_long_bit_size}-bit/metadata"
+
+ validate_path_pattern "UST per-uid network snapshot trace path is valid" "$pattern" "$trace_path"
+}
+
+function validate_trace_path_ust_uid_snapshot ()
+{
+ local trace_path=$1
+ local session_name=$2
+ local snapshot_name=$3
+ local snapshot_number=$4
+ local base_path=$5
+ local uid=$UID
+ local pattern
+ local ret
+
+ # If the session/output was given a network base path (e.g
+ # 127.0.0.1/my/custom/path) on creation, there is no session name
+ # component to the path on the relayd side. Caller can simply not pass a
+ # session name for this scenario.
+ if [ -n "$session_name" ]; then
+ session_name="$session_name-$date_time_pattern"
+ if [ -n "$base_path" ]; then
+ fail "Session name and base path are mutually exclusive"
+ return
+ fi
+ fi
+
+ pattern="$trace_path/$base_path/$session_name/$snapshot_name-$date_time_pattern-$snapshot_number/ust/uid/$uid/${system_long_bit_size}-bit/metadata"
+
+ validate_path_pattern "UST per-uid snapshot trace path is valid" "$pattern" "$trace_path"
+}
+
+function validate_trace_path_ust_pid ()
+{
+ local trace_path=$1
+ local session_name=$2
+ local app_string=$3
+ local pid=$4
+ local pattern
+ local ret
+
+ # If the session was given a trace path on creation, there is no session
+ # name component to the path. Caller can simply not pass a session name
+ # for this scenario.
+ if [ -n "$session_name" ]; then
+ session_name="$session_name-$date_time_pattern"
+ fi
+
+ pattern="$trace_path/$session_name/ust/pid/$pid/$app_string-*-$date_time_pattern/metadata"
+
+ validate_path_pattern "UST per-pid trace path is valid" "$pattern" "$trace_path"
+}
+
+function validate_trace_path_kernel ()
+{
+ local trace_path=$1
+ local session_name=$2
+ local pattern
+
+ # If the session was given a trace path on creation, there is no session
+ # name component to the path. Caller can simply not pass a session name
+ # for this scenario.
+ if [ -n "$session_name" ]; then
+ session_name="$session_name-$date_time_pattern"
+ fi
+
+ pattern="$trace_path/$session_name/kernel/metadata"
+
+ validate_path_pattern "Kernel trace path is valid" "$pattern" "$trace_path"
+}
+
+function validate_trace_path_kernel_network ()
+{
+ local trace_path=$1
+ local session_name=$2
+ local hostname=$HOSTNAME
+ local pattern="$trace_path/$hostname/$session_name-$date_time_pattern/kernel/metadata"
+
+ validate_path_pattern "Kernel network trace path is valid" "$pattern" "$trace_path"
+}
+
+function validate_trace_path_kernel_snapshot ()
+{
+ local trace_path=$1
+ local session_name=$2
+ local snapshot_name=$3
+ local snapshot_number=$4
+ local base_path=$5
+ local pattern
+ local ret
+
+ # If the session/output was given a network base path (e.g
+ # 127.0.0.1/my/custom/path on creation, there is no session name
+ # component to the path on the relayd side. Caller can simply not pass a
+ # session name for this scenario.
+ if [ -n "$session_name" ]; then
+ session_name="$session_name-$date_time_pattern"
+ if [ -n "$base_path" ]; then
+ fail "Session name and base path are mutually exclusive"
+ return
+ fi
+ fi
+
+ pattern="$trace_path/$base_path/$session_name/$snapshot_name-$date_time_pattern-$snapshot_number/kernel/metadata"
+
+ validate_path_pattern "Kernel snapshot trace path is valid" "$pattern" "$trace_path"
+}
+
+function validate_trace_path_kernel_snapshot_network ()
+{
+ local trace_path=$1
+ local session_name=$2
+ local snapshot_name=$3
+ local snapshot_number=$4
+ local base_path=$5
+ local hostname=$HOSTNAME
+ local pattern
+ local ret
+
+ # If the session/output was given a network base path (e.g
+ # 127.0.0.1/my/custom/path on creation, there is no session name
+ # component to the path on the relayd side. Caller can simply not pass a
+ # session name for this scenario.
+ if [ -n "$session_name" ]; then
+ session_name="$session_name-$date_time_pattern"
+ if [ -n "$base_path" ]; then
+ fail "Session name and base path are mutually exclusive"
+ return
+ fi
+ fi
+
+ pattern="$trace_path/$hostname/$base_path/$session_name/$snapshot_name-$date_time_pattern-$snapshot_number/kernel/metadata"
+
+ validate_path_pattern "Kernel network snapshot trace path is valid" "$pattern" "$trace_path"
+}