binary packages and use it. If there are no packages ready for your system, you
will have to install from sources (section 2) instead.
-These operations are made for installing the LTTng 0.4 tracer on a
+These operations are made for installing the LTTng 0.4.3 tracer on a
linux 2.6.12-rc4-mm2 kernel. You will also find instructions for installtion of
LTTV 0.6.x : the Linux Trace Toolkit Viewer.
sources, the dependencies are listed.
+** Current development status **
+
+LTTng :
+supported architectures :
+Intel Pentium (UP/SMP) with TSC
+
+LTTV :
+supported architectures :
+Intel i386 and better
+PowerPC
+
+
+
Author : Mathieu Desnoyers, September 2005
** Section 1 * Installation from Debian or RPM packages **
***********************************************************
-No Debian or RPM packages are ready yet.
+* Install from RPM packages on Fedora Core 4 :
+
+Get LTTV RPM from :
+
+http://ltt.polymtl.ca/packages/fedora/RPMS
+
+LTTV RPM are ready.
+
+LTTng kernel and lttng-modules RPM are available for some architectures (i586,
+i686). Feel free to help fix the spec files to have correct lttng-modules RPM
+package.
+
+
+* Install from Deb packages on Debian :
+
+You can use the ltt.polymtl.ca apt source to get LTTV for Debian :
+
+Add the following two sources to your /etc/apt/sources.list :
+
+deb http://ltt.polymtl.ca/packages/debian experimental main
+deb-src http://ltt.polymtl.ca/packages/debian experimental main
-TODO
+
+* Install from precompiled binary packages (LTTV compiled only for i386, and
+ LTTng only for i686 smp), perform the following :
+
+su -
+apt-get update
+apt-get install lttv lttv-doc
+apt-get install kernel-image-2.6.12-rc4-mm2-lttng-0.4.2
+apt-get install lttng-modules-modules-2.6.12-rc4-mm2-lttng-0.4.2
+ * note : the packages are signed by myself. I am not considered a trusted
+ Debian source yet, so warnings are normal.
+
+Then, follow the section "Editing the system wide configuration" in section 2.
+
+* Create custom LTTV Debian packages
+
+Binary packages are only available for i386. If you want to create your own LTTV
+packages for other platforms, do :
+
+su -
+cd /usr/src
+apt-get source lttv
+cd lttv-0.6.9
+dpkg-buildpackage -rfakeroot
+
+You should then have your LTTV .deb files created for your architecture.
+
+* Create custom LTTng packages
+
+For building LTTng Debian packages :
+
+su -
+apt-get install kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
+cd /usr/src
+bzip2 -cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2.tar.bz2 | tar xvof -
+cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
+make menuconfig (or xconfig or config) (customize your configuration)
+make-kpkg kernel_image
+
+You will then see your freshly created .deb in /usr/src. Install it with
+dpkg -i /usr/src/(image-name).deb
+
+You will also need to create a package for the lttng-modules :
+
+su -
+cd /usr/src
+apt-get source lttng-modules
+cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
+make-kpkg --added_modules /usr/src/lttng-modules-0.3 modules_image
+
+You will then see your freshly created .deb in /usr/src. Install it with
+dpkg -i /usr/src/lttng-modules-modules-(your version).deb
+
+
+Then, follow the section "Editing the system wide configuration" in section 2.
***********************************************************
Prerequisites for LTTV 0.6.x installation are :
-gtk 2.4 or better development libraries (libgtk2.0, libgtk2.0-dev)
-glib 2.4 or better development libraries (libglib2.0-0, libglib2.0-dev)
-libpopt development libraries (libpopt0, libpopt-dev)
-libpango development libraries (libpango1.0, libpango1.0-dev)
-libc6 development librairies (libc6, libc6-dev)
+gcc 3.2 or better
+gtk 2.4 or better development libraries
+ (Debian : libgtk2.0, libgtk2.0-dev)
+ (Fedora : gtk2, gtk2-devel)
+ note : For Fedora users : this might require at least core 3 from Fedora,
+ or you might have to compile your own GTK2 library.
+glib 2.4 or better development libraries
+ (Debian : libglib2.0-0, libglib2.0-dev)
+ (Fedora : glib2, glib2-devel)
+libpopt development libraries
+ (Debian : libpopt0, libpopt-dev)
+ (Fedora : popt)
+libpango development libraries
+ (Debian : libpango1.0, libpango1.0-dev)
+ (Fedora : pango, pango-devel)
+libc6 development librairies
+ (Debian : libc6, libc6-dev)
+ (Fedora : glibc, glibc)
* Getting the LTTng packages
cd /usr/src/lttng
(see http://ltt.polymtl.ca/lttng for package listing)
wget http://ltt.polymtl.ca/lttng/lttng-modules-0.3.tar.bz2
-wget http://ltt.polymtl.ca/lttng/patch-2.6.12-rc4-mm2-lttng-0.4.bz2
+wget http://ltt.polymtl.ca/lttng/patch-2.6.12-rc4-mm2-lttng-0.4.3.tar.bz2
bzip2 -cd lttng-modules-0.3.tar.bz2 | tar xvof -
+bzip2 -cd patch-2.6.12-rc4-mm2-lttng-0.4.3.tar.bz2 | tar xvof -
* Getting LTTng kernel sources
bzip2 -cd linux-2.6.12-rc4.tar.bz2 | tar xvof -
cd linux-2.6.12-rc4
bzip2 -cd ../2.6.12-rc4-mm2.bz2 | patch -p1
-bzip2 -cd /usr/src/lttng/patch-2.6.12-rc4-mm2-lttng-0.4.bz2 | patch -p1
+cat /usr/src/lttng/patch-2.6.12-rc4-mm2-lttng-0.4.3-* | patch -p1
cd ..
-mv linux-2.6.12-rc4 linux-2.6.12-rc4-mm2-lttng-0.4
+mv linux-2.6.12-rc4 linux-2.6.12-rc4-mm2-lttng-0.4.3
* Installing a LTTng kernel
su -
-cd /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4
+cd /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3
make menuconfig (or make xconfig or make config)
Select the < Help > button if you are not familiar with kernel
configuration.
make modules_install
make install
+reboot
+
+ Select the Linux 2.6.12-rc4-mm2-lttng-0.4.3 kernel in your boot loader.
+
+
+* Install the ltt-modules
+
+su -
+cd /usr/src/lttng/lttng-modules-0.3
+KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3 make
+KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3 make modules_install
+
+
+* Editing the system wide configuration
+
You must activate relayfs and specify a mount point. This is typically done in
fstab such that it happens at boot time.
cp /etc/fstab /etc/fstab.lttng.bkp
echo "relayfs /mnt/relayfs relayfs rw 0 0" >> /etc/fstab
-reboot
+then, rebooting or issuing the following command will activate relayfs :
- Select the Linux 2.6.12-rc4-mm2-lttng-0.4 kernel in your boot loader.
-
-
-* Install the ltt-modules
-
-su -
-cd /usr/src/lttng/lttng-modules-0.3
-KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.4 make
-KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.4 make modules_install
+mount /mnt/relayfs
You need to load the ltt-control module to be able to control tracing from user
space. This is done by issuing the command :
su -
cd /usr/src
-wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.6.5-21092005.tar.gz
-gzip -cd LinuxTraceToolkitViewer-0.6.5-21092005.tar.gz | tar xvof -
-cd LinuxTraceToolkitViewer-0.6.5-21092005
+wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.6.9-10102005.tar.gz
+gzip -cd LinuxTraceToolkitViewer-0.6.9-10102005.tar.gz | tar xvof -
+cd LinuxTraceToolkitViewer-0.6.9-10102005
(refer to README to see the development libraries that must be installed on you
system)
./configure
cp process.xml yourfacility.xml
* edit yourfacility.xml to fit your needs.
cd /tmp
-/usr/local/bin/genevent /usr/local/share/LinuxTraceToolkitViewer/yourfacility.xml
+/usr/local/bin/genevent /usr/local/share/LinuxTraceToolkitViewer/facilities/yourfacility.xml
cp ltt-facility-yourfacility.h ltt-facility-id-yourfacility.h \
- /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4/include/linux/ltt
+ /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3/include/linux/ltt
cp ltt-facility-loader-yourfacility.c ltt-facility-loader-yourfacility.h \
- /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4/ltt
+ /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3/ltt
* edit the kernel file you want to instrument
- Add #include <linux/ltt/ltt-facility-yourfacility.h> at the beginning
of the file.
- Add a call to the tracing functions. See their names and parameters in
- /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4/include/linux/ltt/ltt-facility-yourfacility.h
+ /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3/include/linux/ltt/ltt-facility-yourfacility.h
projects / lttv.git / blobdiff