binary packages and use it. If there are no packages ready for your system, you
will have to install from sources (section 2) instead.
-These operations are made for installing the LTTng 0.5.3 tracer on a
-linux 2.6.15 kernel. You will also find instructions for installation of
-LTTV 0.8.x : the Linux Trace Toolkit Viewer.
+These operations are made for installing the LTTng 0.5.X tracer on a
+linux 2.6.X kernel. You will also find instructions for installation of
+LTTV 0.8.x : the Linux Trace Toolkit Viewer.
+
+To see the list of compatibilities between LTTng, ltt-control, LTTV, genevent
+and lttng-modules, please refer to :
+http://ltt.polymtl.ca > LTTng+LTTV versions compatibility
+
+
The following lttng patch is necessary to have the tracing hooks in the kernel.
The following ltt-control module controls the tracing.
LTTng :
supported architectures :
Intel Pentium (UP/SMP) with TSC
+ARM
LTTV :
supported architectures :
Author : Mathieu Desnoyers, September 2005
-Last update : January 10, 2006
+Last update : March 13, 2006
***********************************************************
** NOTE : RPM and debian packages are only made once a version has been
thoroughly tested. If they do not exist at the moment, please install from
- sources (see section 2 below).
+ sources (see section 2 below). To see the list of compatibilities between
+ LTTng, ltt-control, LTTV, genevent and lttng-modules, please refer to
+ http://ltt.polymtl.ca > LTTng+LTTV versions compatibility
* Install from RPM packages on Fedora Core 4 :
You might also want to have libncurses5 to have the text mode kernel
configuration menu, but there are alternatives.
-Prerequisites for LTTV 0.6.x installation are :
+Prerequisites for LTTV 0.x.x installation are :
gcc 3.2 or better
gtk 2.4 or better development libraries
mkdir /usr/src/lttng
cd /usr/src/lttng
(see http://ltt.polymtl.ca/lttng for package listing)
-wget http://ltt.polymtl.ca/lttng/lttng-modules-0.4.tar.bz2
-wget http://ltt.polymtl.ca/lttng/patch-2.6.15-lttng-0.5.3.tar.bz2
-bzip2 -cd lttng-modules-0.4.tar.bz2 | tar xvof -
-bzip2 -cd patch-2.6.15-lttng-0.5.3.tar.bz2 | tar xvof -
+wget http://ltt.polymtl.ca/lttng/lttng-modules-0.5.tar.bz2
+wget http://ltt.polymtl.ca/lttng/patch-2.6.15-lttng-0.x.xx.tar.bz2
+bzip2 -cd lttng-modules-0.x.tar.bz2 | tar xvof -
+bzip2 -cd patch-2.6.15-lttng-0.x.xx.tar.bz2 | tar xvof -
* Getting LTTng kernel sources
wget http://kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.15.tar.bz2
bzip2 -cd linux-2.6.15.tar.bz2 | tar xvof -
cd linux-2.6.15
-cat /usr/src/lttng/patch-2.6.15-lttng-0.5.3* | patch -p1
+cat /usr/src/lttng/patch-2.6.15-lttng-0.x.xx* | patch -p1
cd ..
-mv linux-2.6.15 linux-2.6.15-lttng-0.5.3
+mv linux-2.6.15 linux-2.6.15-lttng-0.x.xx
* Installing a LTTng kernel
su -
-cd /usr/src/linux-2.6.15-lttng-0.5.3
+cd /usr/src/linux-2.6.15-lttng-0.x.xx
make menuconfig (or make xconfig or make config)
Select the < Help > button if you are not familiar with kernel
configuration.
is compiled built-in or as a module.
activate :
[*] Align Linux Trace Toolkit Traces
- do NOT activate (not ready yet) :
+ [*] Allow tracing from userspace
+ your choice (see < Help >) :
[ ] Activate Linux Trace Toolkit Heartbeat Timer
You may or may not activate instrumentation per facility. They are all
selected for logging by default. It can be used as a compile time filter to
reboot
- Select the Linux 2.6.15-lttng-0.5.3 kernel in your boot loader.
+ Select the Linux 2.6.15-lttng-0.x.xx kernel in your boot loader.
* Install the ltt-modules
su -
-cd /usr/src/lttng/lttng-modules-0.4
-KERNELDIR=/usr/src/linux-2.6.15-lttng-0.5.3 make
-KERNELDIR=/usr/src/linux-2.6.15-lttng-0.5.3 make modules_install
+cd /usr/src/lttng/lttng-modules-0.xx
+KERNELDIR=/usr/src/linux-2.6.15-lttng-0.x.xx make
+KERNELDIR=/usr/src/linux-2.6.15-lttng-0.x.xx make modules_install
* Editing the system wide configuration
modprobe ltt-control
+If you want to have complete information about the kernel state (including all
+the process names), you need to load the ltt-statedump module. This is done by
+issuing the command :
+
+modprobe ltt-statedump
+
You can automate at boot time loading the ltt-control module by :
echo ltt-control >> /etc/modules
+echo ltt-statedump >> /etc/modules
+
+
+* Getting and installing the ltt-control package (on the traced machine)
+
+su -
+cd /usr/src
+wget http://ltt.polymtl.ca/lttng/ltt-control-0.x-xxxx2006.tar.gz
+gzip -cd ltt-control-0.x-xxxx2006.tar.gz | tar xvof -
+cd ltt-control-0.x-xxxx2006
+(refer to README to see the development libraries that must be installed on you
+system)
+./configure
+make
+make install
-* Getting and installing the LTTV package
+* Getting and installing the LTTV package (on the visualisation machine, same or
+ different from the visualisation machine)
su -
cd /usr/src
-wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.8.3-06012006.tar.gz
-gzip -cd LinuxTraceToolkitViewer-0.8.3-06012006.tar.gz | tar xvof -
-cd LinuxTraceToolkitViewer-0.8.3-06012006
+wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.x.xx-xxxx2006.tar.gz
+gzip -cd LinuxTraceToolkitViewer-0.x.xx-xxxx2006.tar.gz | tar xvof -
+cd LinuxTraceToolkitViewer-0.x.xx-xxxx2006
(refer to README to see the development libraries that must be installed on you
system)
./configure
su -
cd /usr/src
-wget http://ltt.polymtl.ca/packages/genevent-0.4.tar.gz
-gzip -cd genevent-0.4.tar.gz | tar xvof -
-cd genevent-0.4
+wget http://ltt.polymtl.ca/packages/genevent-0.xx.tar.gz
+gzip -cd genevent-0.xx.tar.gz | tar xvof -
+cd genevent-0.xx
make
make install
cd /tmp
/usr/local/bin/genevent /usr/local/share/LinuxTraceToolkitViewer/facilities/yourfacility.xml
cp ltt-facility-yourfacility.h ltt-facility-id-yourfacility.h \
- /usr/src/linux-2.6.15-lttng-0.5.3/include/linux/ltt
+ /usr/src/linux-2.6.15-lttng-0.x.xx8/include/linux/ltt
cp ltt-facility-loader-yourfacility.c ltt-facility-loader-yourfacility.h \
- /usr/src/linux-2.6.15-lttng-0.5.3/ltt
+ /usr/src/linux-2.6.15-lttng-0.x.xx/ltt
* edit the kernel file you want to instrument
- Add #include <linux/ltt/ltt-facility-yourfacility.h> at the beginning
of the file.
- Add a call to the tracing functions. See their names and parameters in
- /usr/src/linux-2.6.15-lttng-0.5.3/include/linux/ltt/ltt-facility-yourfacility.h
+ /usr/src/linux-2.6.15-lttng-0.x.xx/include/linux/ltt/ltt-facility-yourfacility.h
projects / lttv.git / blobdiff