+ fprintf(ofp, " --no-output Traces will not be outputted\n");
+ fprintf(ofp, " --snapshot Set the session in snapshot mode.\n");
+ fprintf(ofp, " Created in no-output mode and uses the URL,\n");
+ fprintf(ofp, " if one, as the default snapshot output.\n");
+ fprintf(ofp, " Every channel will be set in overwrite mode\n");
+ fprintf(ofp, " and with mmap output (splice not supported).\n");
+ fprintf(ofp, " --live [USEC] Set the session in live-reading mode.\n");
+ fprintf(ofp, " The delay parameter in micro-seconds is the\n");
+ fprintf(ofp, " maximum time the user can wait for the data\n");
+ fprintf(ofp, " to be flushed. Can be set with a network\n");
+ fprintf(ofp, " URL (-U or -C/-D) and must have a relayd listening.\n");
+ fprintf(ofp, " By default, %u is used for the timer and the\n",
+ DEFAULT_LTTNG_LIVE_TIMER);
+ fprintf(ofp, " network URL is set to net://127.0.0.1.\n");
+ fprintf(ofp, " --shm-path PATH Path where shared memory holding buffers\n");
+ fprintf(ofp, " should be created. Useful when used with pramfs\n");
+ fprintf(ofp, " to extract trace data after crash.\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, "Extended Options:\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, "Using these options, each API call can be controlled individually.\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, " -U, --set-url=URL Set URL destination of the trace data.\n");
+ fprintf(ofp, " It is persistent for the session lifetime.\n");
+ fprintf(ofp, " This will set both data and control URL.\n");
+ fprintf(ofp, " -C, --ctrl-url=URL Set control path URL. (Must use -D also)\n");
+ fprintf(ofp, " -D, --data-url=URL Set data path URL. (Must use -C also)\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, "Please refer to the man page (lttng(1)) for more information on network\n");
+ fprintf(ofp, "streaming mechanisms and explanation of the control and data port\n");
+ fprintf(ofp, "You must have a running remote lttng-relayd for network streaming\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, "URL format is has followed:\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, " proto://[HOST|IP][:PORT1[:PORT2]][/TRACE_PATH]\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, " Supported protocols are (proto):\n");
+ fprintf(ofp, " > file://...\n");
+ fprintf(ofp, " Local filesystem full path.\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, " > net[6]://...\n");
+ fprintf(ofp, " This will use the default network transport layer which is\n");
+ fprintf(ofp, " TCP for both control (PORT1) and data port (PORT2).\n");
+ fprintf(ofp, " The default ports are respectively 5342 and 5343.\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, " > tcp[6]://...\n");
+ fprintf(ofp, " Can only be used with -C and -D together\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, "NOTE: IPv6 address MUST be enclosed in brackets '[]' (rfc2732)\n");
+ fprintf(ofp, "\n");
+ fprintf(ofp, "Examples:\n");
+ fprintf(ofp, " # lttng create -U net://192.168.1.42\n");
+ fprintf(ofp, " Uses TCP and default ports for the given destination.\n");
+ fprintf(ofp, " # lttng create -U net6://[fe80::f66d:4ff:fe53:d220]\n");
+ fprintf(ofp, " Uses TCP, default ports and IPv6.\n");
+ fprintf(ofp, " # lttng create s1 -U net://myhost.com:3229\n");
+ fprintf(ofp, " Set the consumer to the remote HOST on port 3229 for control.\n");