Add consumer commands to lttng.1 man page

enable-consumer and disable-consumer are documented in lttng.1

The create command was also modified in version 2.1.

Some basic fixes of indentation, syntax and updates.

Signed-off-by: David Goulet <dgoulet@efficios.com>

diff --git a/doc/man/lttng.1 b/doc/man/lttng.1
index 089d87fa09861188d8e38551b1c4fde7b54829cf..468ed69400edf31285f8a5061c7cd1bbfaf7f9ad 100644 (file)
--- a/doc/man/lttng.1
+++ b/doc/man/lttng.1
@@ -195,7 +195,7 @@ prefetch activity) to be accounted for.
 
 .IP
 
 
 .IP
 

-.IP "\fBcreate\fP [OPTIONS] [NAME]
+.IP "\fBcreate\fP [NAME] [OPTIONS]

 .nf
 Create tracing session.
 
 .nf
 Create tracing session.
 


@@ -221,6 +221,36 @@ $HOME/lttng-traces.
         Simple listing of options
 \-o, \-\-output PATH
         Specify output path for traces
         Simple listing of options
 \-o, \-\-output PATH
         Specify output path for traces

+
+Using these options, each API call can be controlled individually. For
+instance, \-C does not enable the consumer automatically. You'll need the \-e
+option for that.
+
+\-U, \-\-set-uri=URL
+        Set URL for the enable-consumer destination. It is persistent for the
+        session lifetime. Redo the command to change it. This will set both
+        data and control URL for network.
+\-C, \-\-ctrl-url=URL
+        Set control path URL. (Must use -D also)
+\-D, \-\-data-url=URL
+        Set data path URL. (Must use -C also)
+     \-\-no-consumer
+        Don't activate a consumer for this session.
+     \-\-disable-consumer
+        Disable consumer for this session.
+
+See \fBenable-consumer\fP command below for the supported URL format.
+
+.B EXAMPLES:
+
+# lttng create -U net://192.168.1.42
+Uses TCP and default ports for the given destination.
+
+# lttng create -U net6://[fe80::f66d:4ff:fe53:d220]
+Uses TCP, default ports and IPv6.
+
+# lttng create s1 -U net://myhost.com:3229
+Create session s1 and set its consumer to myhost.com on port 3229 for control.

 .fi
 
 .IP
 .fi
 
 .IP


@@ -289,6 +319,80 @@ file.
 
 .IP
 
 
 .IP
 

+.IP "\fBenable-consumer\fP [-u|-k] [URL] [OPTIONS]"
+.nf
+Enable a consumer for the tracing session and domain.
+
+By default, every tracing session has a consumer attached to it using the local
+filesystem as output. The trace is written in $HOME/lttng-traces. This command
+allows the user to specify a specific URL after the session was created for a
+specific domain. If no domain is specified, the consumer is applied on all
+domains.
+
+Without options, the behavior is to enable a consumer to the current URL. The
+default URL is the local filesystem at the path of the session mentioned above.
+
+The enable-consumer feature supports both local and network transport. You must
+have a running \fBlttng-relayd(8)\fP for network transmission or any other daemon
+that can understand the streaming protocol of LTTng.
+.fi
+
+.B OPTIONS:
+
+.nf
+\-h, \-\-help
+        Show summary of possible options and commands.
+\-\-list-options
+        Simple listing of options
+\-s, \-\-session
+        Apply on session name
+\-k, \-\-kernel
+        Apply for the kernel tracer
+\-u, \-\-userspace
+        Apply for the user-space tracer
+
+Using these options, each API call can be controlled individually. For
+instance, \-C does not enable the consumer automatically. You'll need the \-e
+option for that.
+
+\-U, \-\-set-uri=URL
+        Set URL for the enable-consumer destination. It is persistent for the
+        session lifetime. Redo the command to change it. This will set both
+        data and control URL for network.
+\-C, \-\-ctrl-url=URL
+        Set control path URL. (Must use -D also)
+\-D, \-\-data-url=URL
+        Set data path URL. (Must use -C also)
+\-e, \-\-enable
+        Enable consumer
+
+.B URL FORMAT:
+
+proto://[HOST|IP][:PORT1[:PORT2]][/TRACE_PATH]
+
+Supported protocols are (proto):
+> file://...
+        Local filesystem full path.
+
+> net[6]://...
+        This will use the default network transport layer which is TCP for both
+        control (PORT1) and data port (PORT2). The default ports are
+        respectively 5342 and 5343.
+
+> tcp[6]://...
+        Can only be used with -C and -D together
+
+NOTE: IPv6 address MUST be enclosed in brackets '[]' (rfc2732)
+
+.B EXAMPLES:
+
+$ lttng enable-consumer -u net://192.168.1.42
+
+Uses TCP and default ports for user space tracing (-u) where the IP address
+above is the destination machine where the traces will be streamed and a
+\fBlttng-relayd(8)\fP is listening.
+.fi
+

 .IP "\fBenable-event\fP NAME[,NAME2,...] [-k|-u] [OPTIONS]"
 .nf
 Enable tracing event
 .IP "\fBenable-event\fP NAME[,NAME2,...] [-k|-u] [OPTIONS]"
 .nf
 Enable tracing event


@@ -336,33 +440,29 @@ file.
         Dynamic function entry/return probe. Addr and offset can be octal
         (0NNN...), decimal (NNN...) or hexadecimal (0xNNN...)
 \-\-syscall
         Dynamic function entry/return probe. Addr and offset can be octal
         (0NNN...), decimal (NNN...) or hexadecimal (0xNNN...)
 \-\-syscall

-        System call event
-        Enabling syscalls tracing (kernel tracer), you will not be able to disable them
-        with disable-event. This is a known limitation. You can disable the entire
-        channel to do the trick.
+        System call event. Enabling syscalls tracing (kernel tracer), you will
+        not be able to disable them with disable-event. This is a known
+        limitation. You can disable the entire channel to do the trick.

 
 \-\-filter 'expression'
 
 \-\-filter 'expression'

-       Set a filter on a newly enabled event.
-       Filter expression on event fields, event recording
-       depends on evaluation. Only specify on first activation
-       of a given event within a session. Filter only allowed
-       when enabling events within a session before tracing is
-       started. If the filter fails to link with the event
-       within the traced domain, the event will be discarded.
-       Currently, filter is only implemented for the user-space 
-       tracer.
-       Expression examples:
-
-       'intfield > 500 && intfield < 503'
-       '(stringfield == "test" || intfield != 10) && intfield > 33'
-       'doublefield > 1.1 && intfield < 5.3'
-
-       Wildcards are allowed at the end of strings:
-       'seqfield1 == "te*"'
-       In string literals, the escape character is a '\\'.
-       Use '\\*' for the '*' character, and '\\\\' for the
-       '\\' character.
-
+        Set a filter on a newly enabled event. Filter expression on event
+        fields, event recording depends on evaluation. Only specify on first
+        activation of a given event within a session. Filter only allowed when
+        enabling events within a session before tracing is started. If the
+        filter fails to link with the event within the traced domain, the event
+        will be discarded. Currently, filter is only implemented for the
+        user-space tracer.
+
+        Expression examples:
+
+        'intfield > 500 && intfield < 503'
+        '(stringfield == "test" || intfield != 10) && intfield > 33'
+        'doublefield > 1.1 && intfield < 5.3'
+
+        Wildcards are allowed at the end of strings:
+        'seqfield1 == "te*"'
+        In string literals, the escape character is a '\\'. Use '\\*' for
+        the '*' character, and '\\\\' for the '\\' character.

 .fi
 
 .IP "\fBdisable-channel\fP NAME[,NAME2,...] [\-k|\-u] [OPTIONS]"
 .fi
 
 .IP "\fBdisable-channel\fP NAME[,NAME2,...] [\-k|\-u] [OPTIONS]"


@@ -383,7 +483,29 @@ file.
         Show summary of possible options and commands.
 \-\-list-options
         Simple listing of options
         Show summary of possible options and commands.
 \-\-list-options
         Simple listing of options

-\-s, \-\-session
+\-s, \-\-session NAME
+        Apply on session name
+\-k, \-\-kernel
+        Apply for the kernel tracer
+\-u, \-\-userspace
+        Apply for the user-space tracer
+.fi
+
+.IP "\fBdisable-consumer\fP [\-k|\-u] [OPTIONS]"
+.nf
+Disable the consumer of a tracing session.
+
+This call MUST be done BEFORE tracing has started.
+.fi
+
+.B OPTIONS:
+
+.nf
+\-h, \-\-help
+        Show summary of possible options and commands.
+\-\-list-options
+        Simple listing of options
+\-s, \-\-session NAME

         Apply on session name
 \-k, \-\-kernel
         Apply for the kernel tracer
         Apply on session name
 \-k, \-\-kernel
         Apply for the kernel tracer


@@ -452,7 +574,8 @@ You can now enable any event listed by using the name :
 \-u, \-\-userspace
         Select user-space domain.
 
 \-u, \-\-userspace
         Select user-space domain.
 

-Session options:
+.B SESSION OPTIONS:
+

 \-c, \-\-channel NAME
         List details of a channel
 \-d, \-\-domain
 \-c, \-\-channel NAME
         List details of a channel
 \-d, \-\-domain


@@ -477,7 +600,7 @@ Will change the session name in the .lttngrc file.
 
 .IP
 
 
 .IP
 

-.IP "\fBstart\fP [OPTIONS] [NAME]"
+.IP "\fBstart\fP [NAME] [OPTIONS]"

 .nf
 Start tracing
 
 .nf
 Start tracing
 


@@ -497,7 +620,7 @@ If NAME is omitted, the session name is taken from the .lttngrc file.
 
 .IP
 
 
 .IP
 

-.IP "\fBstop\fP [OPTIONS] [NAME]"
+.IP "\fBstop\fP [NAME] [OPTIONS]"

 .nf
 Stop tracing
 
 .nf
 Stop tracing
 


@@ -561,118 +684,15 @@ If SESSION_NAME is omitted, the session name is taken from the .lttngrc file.
 .fi
 
 .SH "EXIT VALUES"
 .fi
 
 .SH "EXIT VALUES"

+On success 0 is returned and a positive value on error. Value of 1 means a command
+error, 2 an undefined command, 3 a fatal error and 4 a command warning meaning that
+something went wrong during the command.

 
 

-.IP "0"
-Success
-
-.IP "1"
-Command error
-
-.IP "2"
-Undefined command
-
-.IP "3"
-Fatal error
-
-.IP "4"
-Command warning
-
-.IP "16"
-No session found by the name given
-
-.IP "18"
-Error in session creation
-
-.IP "21"
-Error in application(s) listing
-
-.IP "28"
-Session name already exists
-
-.IP "33"
-Kernel tracer unavailable
-
-.IP "35"
-Kernel event exists
-
-.IP "37"
-Kernel channel exists
-
-.IP "38"
-Kernel channel creation failed
-
-.IP "39"
-Kernel channel not found
-
-.IP "40"
-Kernel channel disable failed
+Any other value above 10, please refer to
+.BR <lttng/lttng-error.h>
+for a detailed list or use lttng_strerror() to get a human readable string of
+the error code.

 
 

-.IP "41"
-Kernel channel enable failed
-
-.IP "42"
-Kernel context failed
-
-.IP "43"
-Kernel enable event failed
-
-.IP "44"
-Kernel disable event failed
-
-.IP "53"
-Kernel listing events failed
-
-.IP "60"
-UST channel disable failed
-
-.IP "61"
-UST channel enable failed
-
-.IP "62"
-UST adding context failed
-
-.IP "63"
-UST event enable failed
-
-.IP "64"
-UST event disable failed
-
-.IP "66"
-UST start failed
-
-.IP "67"
-UST stop failed
-
-.IP "75"
-UST event exists
-
-.IP "76"
-UST event not found
-
-.IP "77"
-UST context exists
-
-.IP "78"
-UST invalid context
-
-.IP "79"
-Tracing the kernel requires a root lttng-sessiond daemon and "tracing" group
-user membership.
-
-.IP "80"
-Tracing already started
-
-.IP "81"
-Tracing already stopped
-
-.IP "98"
-No UST consumer detected
-
-.IP "99"
-No Kernel consumer detected
-
-.IP "100"
-Event already enabled with different loglevel

 .PP
 .SH "ENVIRONMENT VARIABLES"
 
 .PP
 .SH "ENVIRONMENT VARIABLES"
 


@@ -685,17 +705,20 @@ Note that all command line options override environment variables.
 Allows one to specify the full session daemon binary path to lttng command line
 tool. You can also use \-\-sessiond-path option having the same effect.
 .SH "SEE ALSO"
 Allows one to specify the full session daemon binary path to lttng command line
 tool. You can also use \-\-sessiond-path option having the same effect.
 .SH "SEE ALSO"

-
-.PP
-babeltrace(1), lttng-ust(3), lttng-sessiond(8)
-.PP
+.BR babeltrace(1),
+.BR lttng-ust(3),
+.BR lttng-sessiond(8),
+.BR lttng-relayd(8),
+.BR lttng-health-check(3)

 .SH "BUGS"
 
 .SH "BUGS"
 

-.PP
-No show stopper bugs are known yet in this version.
+With version 2.1 and earlier, if you start a tracing session and than enable
+kernel events, they are not recorded and the tracing session fails to stop.  To
+fix this, simply enable events before starting the session.

 
 If you encounter any issues or usability problem, please report it on our
 
 If you encounter any issues or usability problem, please report it on our

-mailing list <lttng-dev@lists.lttng.org> to help improve this project.
+mailing list <lttng-dev@lists.lttng.org> to help improve this project or
+at https://bugs.lttng.org which is a bugtracker.

 .SH "CREDITS"
 
 .PP
 .SH "CREDITS"
 
 .PP