Fix: Synchronization issue for data available command
authorDavid Goulet <dgoulet@efficios.com>
Thu, 25 Oct 2012 19:48:15 +0000 (15:48 -0400)
committerDavid Goulet <dgoulet@efficios.com>
Fri, 26 Oct 2012 14:11:41 +0000 (10:11 -0400)
Signed-off-by: David Goulet <dgoulet@efficios.com>
src/common/consumer.c
src/common/kernel-consumer/kernel-consumer.c
src/common/ust-consumer/ust-consumer.c

index d245ed7eecb385cb72b76841a14944810f9a72c1..efd9e7eb3d368552685c3e0a7bd3f54362943318 100644 (file)
@@ -2671,6 +2671,34 @@ error:
        return ret;
 }
 
+/*
+ * Try to lock the stream mutex.
+ *
+ * On success, 1 is returned else 0 indicating that the mutex is NOT lock.
+ */
+static int stream_try_lock(struct lttng_consumer_stream *stream)
+{
+       int ret;
+
+       assert(stream);
+
+       /*
+        * Try to lock the stream mutex. On failure, we know that the stream is
+        * being used else where hence there is data still being extracted.
+        */
+       ret = pthread_mutex_trylock(&stream->lock);
+       if (ret) {
+               /* For both EBUSY and EINVAL error, the mutex is NOT locked. */
+               ret = 0;
+               goto end;
+       }
+
+       ret = 1;
+
+end:
+       return ret;
+}
+
 /*
  * Check if for a given session id there is still data needed to be extract
  * from the buffers.
@@ -2711,17 +2739,42 @@ int consumer_data_available(uint64_t id)
                        ht->hash_fct((void *)((unsigned long) id), 0x42UL),
                        ht->match_fct, (void *)((unsigned long) id),
                        &iter.iter, stream, node_session_id.node) {
-               /* Check the stream for data. */
-               ret = data_available(stream);
-               if (ret == 0) {
+               /* If this call fails, the stream is being used hence data pending. */
+               ret = stream_try_lock(stream);
+               if (!ret) {
                        goto data_not_available;
                }
 
+               /*
+                * A removed node from the hash table indicates that the stream has
+                * been deleted thus having a guarantee that the buffers are closed
+                * on the consumer side. However, data can still be transmitted
+                * over the network so don't skip the relayd check.
+                */
+               ret = cds_lfht_is_node_deleted(&stream->node.node);
+               if (!ret) {
+                       /* Check the stream if there is data in the buffers. */
+                       ret = data_available(stream);
+                       if (ret == 0) {
+                               pthread_mutex_unlock(&stream->lock);
+                               goto data_not_available;
+                       }
+               }
+
+               /* Relayd check */
                if (stream->net_seq_idx != -1) {
                        relayd = consumer_find_relayd(stream->net_seq_idx);
-                       assert(relayd);
+                       if (!relayd) {
+                               /*
+                                * At this point, if the relayd object is not available for the
+                                * given stream, it is because the relayd is being cleaned up
+                                * so every stream associated with it (for a session id value)
+                                * are or will be marked for deletion hence no data pending.
+                                */
+                               pthread_mutex_unlock(&stream->lock);
+                               goto data_not_available;
+                       }
 
-                       pthread_mutex_lock(&stream->lock);
                        pthread_mutex_lock(&relayd->ctrl_sock_mutex);
                        if (stream->metadata_flag) {
                                ret = relayd_quiescent_control(&relayd->control_sock);
@@ -2730,11 +2783,12 @@ int consumer_data_available(uint64_t id)
                                                stream->relayd_stream_id, stream->next_net_seq_num);
                        }
                        pthread_mutex_unlock(&relayd->ctrl_sock_mutex);
-                       pthread_mutex_unlock(&stream->lock);
                        if (ret == 0) {
+                               pthread_mutex_unlock(&stream->lock);
                                goto data_not_available;
                        }
                }
+               pthread_mutex_unlock(&stream->lock);
        }
 
        /*
index 249df8a47bc4789ae9aedee05300e248c52e926e..196deee9a153e521447703915d9ee9d2790502a4 100644 (file)
@@ -485,7 +485,8 @@ error:
 
 /*
  * Check if data is still being extracted from the buffers for a specific
- * stream. Consumer data lock MUST be acquired before calling this function.
+ * stream. Consumer data lock MUST be acquired before calling this function
+ * and the stream lock.
  *
  * Return 0 if the traced data are still getting read else 1 meaning that the
  * data is available for trace viewer reading.
@@ -496,31 +497,17 @@ int lttng_kconsumer_data_available(struct lttng_consumer_stream *stream)
 
        assert(stream);
 
-       /*
-        * Try to lock the stream mutex. On failure, we know that the stream is
-        * being used else where hence there is data still being extracted.
-        */
-       ret = pthread_mutex_trylock(&stream->lock);
-       if (ret == EBUSY) {
-               /* Data not available */
-               ret = 0;
-               goto end;
-       }
-       /* The stream is now locked so we can do our ustctl calls */
-
        ret = kernctl_get_next_subbuf(stream->wait_fd);
        if (ret == 0) {
                /* There is still data so let's put back this subbuffer. */
                ret = kernctl_put_subbuf(stream->wait_fd);
                assert(ret == 0);
-               goto end_unlock;
+               goto end;
        }
 
        /* Data is available to be read for this stream. */
        ret = 1;
 
-end_unlock:
-       pthread_mutex_unlock(&stream->lock);
 end:
        return ret;
 }
index e8e3f9396c9b784ec40d3d98357b9d20aaf04dad..4d3671a34bbcbe027ae9520f44aca94a51b92af0 100644 (file)
@@ -526,7 +526,8 @@ error:
 
 /*
  * Check if data is still being extracted from the buffers for a specific
- * stream. Consumer data lock MUST be acquired before calling this function.
+ * stream. Consumer data lock MUST be acquired before calling this function
+ * and the stream lock.
  *
  * Return 0 if the traced data are still getting read else 1 meaning that the
  * data is available for trace viewer reading.
@@ -539,31 +540,17 @@ int lttng_ustconsumer_data_available(struct lttng_consumer_stream *stream)
 
        DBG("UST consumer checking data availability");
 
-       /*
-        * Try to lock the stream mutex. On failure, we know that the stream is
-        * being used else where hence there is data still being extracted.
-        */
-       ret = pthread_mutex_trylock(&stream->lock);
-       if (ret == EBUSY) {
-               /* Data not available */
-               ret = 0;
-               goto end;
-       }
-       /* The stream is now locked so we can do our ustctl calls */
-
        ret = ustctl_get_next_subbuf(stream->chan->handle, stream->buf);
        if (ret == 0) {
                /* There is still data so let's put back this subbuffer. */
                ret = ustctl_put_subbuf(stream->chan->handle, stream->buf);
                assert(ret == 0);
-               goto end_unlock;
+               goto end;
        }
 
        /* Data is available to be read for this stream. */
        ret = 1;
 
-end_unlock:
-       pthread_mutex_unlock(&stream->lock);
 end:
        return ret;
 }
This page took 0.039136 seconds and 4 git commands to generate.