trackers: change error code from "pid" to "id"
[lttng-tools.git] / src / common / error.c
index 2cebbf9ef47f2b360c3277e4953293e8a7e374ac..c5ddadfa07976b2ad406ff3d3819293d3f0f9646 100644 (file)
  * Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */
 
-#define _GNU_SOURCE
 #define _LGPL_SOURCE
 #include <assert.h>
 #include <inttypes.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
 
 #include <lttng/lttng-error.h>
 #include <common/common.h>
+#include <common/compat/getenv.h>
 
 #include "error.h"
 
 #define ERROR_INDEX(code) (code - LTTNG_OK)
 
+/*
+ * lttng_opt_abort_on_error: unset: -1, disabled: 0, enabled: 1.
+ * Controlled by the LTTNG_ABORT_ON_ERROR environment variable.
+ */
+static int lttng_opt_abort_on_error = -1;
+
 /* TLS variable that contains the time of one single log entry. */
 DEFINE_URCU_TLS(struct log_time, error_log_time);
 
@@ -37,8 +46,9 @@ const char *log_add_time(void)
        struct tm tm, *res;
        struct timespec tp;
        time_t now;
+       const int errsv = errno;
 
-       ret = clock_gettime(CLOCK_REALTIME, &tp);
+       ret = lttng_clock_gettime(CLOCK_REALTIME, &tp);
        if (ret < 0) {
                goto error;
        }
@@ -51,16 +61,18 @@ const char *log_add_time(void)
 
        /* Format time in the TLS variable. */
        ret = snprintf(URCU_TLS(error_log_time).str, sizeof(URCU_TLS(error_log_time).str),
-                       "%02d:%02d:%02d.%06ld",
+                       "%02d:%02d:%02d.%09ld",
                        tm.tm_hour, tm.tm_min, tm.tm_sec, tp.tv_nsec);
        if (ret < 0) {
                goto error;
        }
 
+       errno = errsv;
        return URCU_TLS(error_log_time).str;
 
 error:
        /* Return an empty string on error so logging is not affected. */
+       errno = errsv;
        return "";
 }
 
@@ -157,7 +169,7 @@ static const char *error_string_array[] = {
        [ ERROR_INDEX(LTTNG_ERR_NO_CHANNEL) ] = "No channel found in the session",
        [ ERROR_INDEX(LTTNG_ERR_SESSION_INVALID_CHAR) ] = "Invalid character found in session name",
        [ ERROR_INDEX(LTTNG_ERR_SAVE_FILE_EXIST) ] = "Session file already exists",
-       [ ERROR_INDEX(LTTNG_ERR_SAVE_IO_FAIL) ] = "IO error while writting session configuration",
+       [ ERROR_INDEX(LTTNG_ERR_SAVE_IO_FAIL) ] = "IO error while writing session configuration",
        [ ERROR_INDEX(LTTNG_ERR_LOAD_INVALID_CONFIG) ] = "Invalid session configuration",
        [ ERROR_INDEX(LTTNG_ERR_LOAD_IO_FAIL) ] = "IO error while reading a session configuration",
        [ ERROR_INDEX(LTTNG_ERR_LOAD_SESSION_NOENT) ] = "Session file not found",
@@ -166,6 +178,55 @@ static const char *error_string_array[] = {
        [ ERROR_INDEX(LTTNG_ERR_MI_IO_FAIL) ] = "IO error while writing MI output",
        [ ERROR_INDEX(LTTNG_ERR_MI_NOT_IMPLEMENTED) ] = "Mi feature not implemented",
        [ ERROR_INDEX(LTTNG_ERR_INVALID_EVENT_NAME) ] = "Invalid event name",
+       [ ERROR_INDEX(LTTNG_ERR_INVALID_CHANNEL_NAME) ] = "Invalid channel name",
+       [ ERROR_INDEX(LTTNG_ERR_ID_TRACKED) ] = "ID already tracked",
+       [ ERROR_INDEX(LTTNG_ERR_ID_NOT_TRACKED) ] = "ID not tracked",
+       [ ERROR_INDEX(LTTNG_ERR_INVALID_CHANNEL_DOMAIN) ] = "Invalid channel domain",
+       [ ERROR_INDEX(LTTNG_ERR_OVERFLOW) ] = "Overflow occurred",
+       [ ERROR_INDEX(LTTNG_ERR_SESSION_NOT_STARTED) ] = "Session not started",
+       [ ERROR_INDEX(LTTNG_ERR_LIVE_SESSION) ] = "Live sessions are not supported",
+       [ ERROR_INDEX(LTTNG_ERR_PER_PID_SESSION) ] = "Per-PID tracing sessions are not supported",
+       [ ERROR_INDEX(LTTNG_ERR_KERN_CONTEXT_UNAVAILABLE) ] = "Context unavailable on this kernel",
+       [ ERROR_INDEX(LTTNG_ERR_REGEN_STATEDUMP_FAIL) ] = "Failed to regenerate the state dump",
+       [ ERROR_INDEX(LTTNG_ERR_REGEN_STATEDUMP_NOMEM) ] = "Failed to regenerate the state dump, not enough memory",
+       [ ERROR_INDEX(LTTNG_ERR_NOT_SNAPSHOT_SESSION) ] = "Snapshot command can't be applied to a non-snapshot session",
+       [ ERROR_INDEX(LTTNG_ERR_INVALID_TRIGGER) ] = "Invalid trigger",
+       [ ERROR_INDEX(LTTNG_ERR_TRIGGER_EXISTS) ] = "Trigger already registered",
+       [ ERROR_INDEX(LTTNG_ERR_TRIGGER_NOT_FOUND) ] = "Trigger not found",
+       [ ERROR_INDEX(LTTNG_ERR_COMMAND_CANCELLED) ] = "Command cancelled",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_PENDING) ] = "Rotation already pending for this session",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_NOT_AVAILABLE) ] = "Rotation feature not available for this session's creation mode",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_SCHEDULE_SET) ] = "A session rotation schedule of this type is already set on the session",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_SCHEDULE_NOT_SET) ] = "No session rotation schedule of this type is set on the session",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_MULTIPLE_AFTER_STOP) ] = "Session was already rotated once since it became inactive",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_WRONG_VERSION) ] = "Session rotation is not supported by this kernel tracer version",
+       [ ERROR_INDEX(LTTNG_ERR_NO_SESSION_OUTPUT) ] = "Session has no output",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_NOT_AVAILABLE_RELAY) ] = "Rotation feature not available on the relay",
+       [ ERROR_INDEX(LTTNG_ERR_AGENT_TRACING_DISABLED) ] = "Session daemon agent tracing is disabled",
+       [ ERROR_INDEX(LTTNG_ERR_PROBE_LOCATION_INVAL) ] = "Invalid userspace probe location",
+       [ ERROR_INDEX(LTTNG_ERR_ELF_PARSING) ] = "ELF parsing error",
+       [ ERROR_INDEX(LTTNG_ERR_SDT_PROBE_SEMAPHORE) ] = "SDT probe guarded by a semaphore",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_FAIL_CONSUMER) ] = "Rotation failure on consumer",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATE_RENAME_FAIL_CONSUMER) ] = "Rotation rename failure on consumer",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_PENDING_LOCAL_FAIL_CONSUMER) ] = "Rotation pending check (local) failure on consumer",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_PENDING_RELAY_FAIL_CONSUMER) ] = "Rotation pending check (relay) failure on consumer",
+       [ ERROR_INDEX(LTTNG_ERR_MKDIR_FAIL_CONSUMER) ] = "Directory creation failure on consumer",
+       [ ERROR_INDEX(LTTNG_ERR_CHAN_NOT_FOUND) ] = "Channel not found",
+       [ ERROR_INDEX(LTTNG_ERR_SNAPSHOT_UNSUPPORTED) ] = "Session configuration does not allow the use of snapshots",
+       [ ERROR_INDEX(LTTNG_ERR_SESSION_NOT_EXIST) ] = "Tracing session does not exist",
+       [ ERROR_INDEX(LTTNG_ERR_CREATE_TRACE_CHUNK_FAIL_CONSUMER) ] = "Trace chunk creation failed on consumer",
+       [ ERROR_INDEX(LTTNG_ERR_CLOSE_TRACE_CHUNK_FAIL_CONSUMER) ] = "Trace chunk close failed on consumer",
+       [ ERROR_INDEX(LTTNG_ERR_TRACE_CHUNK_EXISTS_FAIL_CONSUMER) ] = "Failed to query consumer for trace chunk existence",
+       [ ERROR_INDEX(LTTNG_ERR_INVALID_PROTOCOL) ] = "Protocol error occurred",
+       [ ERROR_INDEX(LTTNG_ERR_FILE_CREATION_ERROR) ] = "Failed to create file",
+       [ ERROR_INDEX(LTTNG_ERR_TIMER_STOP_ERROR) ] = "Failed to stop a timer",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_NOT_AVAILABLE_KERNEL) ] = "Rotation feature not supported by the kernel tracer.",
+       [ ERROR_INDEX(LTTNG_ERR_CLEAR_RELAY_DISALLOWED) ] = "Relayd daemon peer does not allow sessions to be cleared",
+       [ ERROR_INDEX(LTTNG_ERR_CLEAR_NOT_AVAILABLE_RELAY) ] = "Clearing a session is not supported by the relay daemon",
+       [ ERROR_INDEX(LTTNG_ERR_CLEAR_FAIL_CONSUMER) ] = "Consumer failed to clear the session",
+       [ ERROR_INDEX(LTTNG_ERR_ROTATION_AFTER_STOP_CLEAR) ] = "Session was already cleared since it became inactive",
+       [ ERROR_INDEX(LTTNG_ERR_USER_NOT_FOUND) ] = "User not found",
+       [ ERROR_INDEX(LTTNG_ERR_GROUP_NOT_FOUND) ] = "Group not found",
 
        /* Last element */
        [ ERROR_INDEX(LTTNG_ERR_NR) ] = "Unknown error code"
@@ -188,3 +249,22 @@ const char *error_get_str(int32_t code)
 
        return error_string_array[ERROR_INDEX(code)];
 }
+
+LTTNG_HIDDEN
+void lttng_abort_on_error(void)
+{
+       if (lttng_opt_abort_on_error < 0) {
+               /* Use lttng_secure_getenv() to query its state. */
+               const char *value;
+
+               value = lttng_secure_getenv("LTTNG_ABORT_ON_ERROR");
+               if (value && !strcmp(value, "1")) {
+                       lttng_opt_abort_on_error = 1;
+               } else {
+                       lttng_opt_abort_on_error = 0;
+               }
+       }
+       if (lttng_opt_abort_on_error > 0) {
+               abort();
+       }
+}
This page took 0.025255 seconds and 4 git commands to generate.