* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#define _GNU_SOURCE
#define _LGPL_SOURCE
#include <assert.h>
#include <ctype.h>
* why this declaration exists and used ONLY in for this command.
*/
extern int _lttng_create_session_ext(const char *name, const char *url,
- const char *datetime, int live_timer);
-
-/*
- * usage
- */
-static void usage(FILE *ofp)
-{
- fprintf(ofp, "usage: lttng create [NAME] [OPTIONS] \n");
- fprintf(ofp, "\n");
- fprintf(ofp, "Without a given NAME, the default is 'auto-<yyyymmdd>-<hhmmss>'\n");
- fprintf(ofp, "\n");
- fprintf(ofp, "Options:\n");
- fprintf(ofp, " -h, --help Show this help\n");
- fprintf(ofp, " --list-options Simple listing of options\n");
- fprintf(ofp, " -o, --output PATH Specify output path for traces\n");
- fprintf(ofp, " --no-output Traces will not be outputted\n");
- fprintf(ofp, " --snapshot Set the session in snapshot mode.\n");
- fprintf(ofp, " Created in no-output mode and uses the URL,\n");
- fprintf(ofp, " if one, as the default snapshot output.\n");
- fprintf(ofp, " Every channel will be set in overwrite mode\n");
- fprintf(ofp, " and with mmap output (splice not supported).\n");
- fprintf(ofp, " --live [USEC] Set the session in live-reading mode.\n");
- fprintf(ofp, " The delay parameter in micro-seconds is the\n");
- fprintf(ofp, " maximum time the user can wait for the data\n");
- fprintf(ofp, " to be flushed. Can be set with a network\n");
- fprintf(ofp, " URL (-U or -C/-D) and must have a relayd listening.\n");
- fprintf(ofp, " By default, %u is used for the timer and the\n",
- DEFAULT_LTTNG_LIVE_TIMER);
- fprintf(ofp, " network URL is set to net://127.0.0.1.\n");
- fprintf(ofp, " --shm-path PATH Path where shared memory holding buffers\n");
- fprintf(ofp, " should be created. Useful when used with pramfs\n");
- fprintf(ofp, " to extract trace data after crash.\n");
- fprintf(ofp, "\n");
- fprintf(ofp, "Extended Options:\n");
- fprintf(ofp, "\n");
- fprintf(ofp, "Using these options, each API call can be controlled individually.\n");
- fprintf(ofp, "\n");
- fprintf(ofp, " -U, --set-url=URL Set URL destination of the trace data.\n");
- fprintf(ofp, " It is persistent for the session lifetime.\n");
- fprintf(ofp, " This will set both data and control URL.\n");
- fprintf(ofp, " -C, --ctrl-url=URL Set control path URL. (Must use -D also)\n");
- fprintf(ofp, " -D, --data-url=URL Set data path URL. (Must use -C also)\n");
- fprintf(ofp, "\n");
- fprintf(ofp, "Please refer to the man page (lttng(1)) for more information on network\n");
- fprintf(ofp, "streaming mechanisms and explanation of the control and data port\n");
- fprintf(ofp, "You must have a running remote lttng-relayd for network streaming\n");
- fprintf(ofp, "\n");
- fprintf(ofp, "URL format is has followed:\n");
- fprintf(ofp, "\n");
- fprintf(ofp, " proto://[HOST|IP][:PORT1[:PORT2]][/TRACE_PATH]\n");
- fprintf(ofp, "\n");
- fprintf(ofp, " Supported protocols are (proto):\n");
- fprintf(ofp, " > file://...\n");
- fprintf(ofp, " Local filesystem full path.\n");
- fprintf(ofp, "\n");
- fprintf(ofp, " > net[6]://...\n");
- fprintf(ofp, " This will use the default network transport layer which is\n");
- fprintf(ofp, " TCP for both control (PORT1) and data port (PORT2).\n");
- fprintf(ofp, " The default ports are respectively 5342 and 5343.\n");
- fprintf(ofp, "\n");
- fprintf(ofp, " > tcp[6]://...\n");
- fprintf(ofp, " Can only be used with -C and -D together\n");
- fprintf(ofp, "\n");
- fprintf(ofp, "NOTE: IPv6 address MUST be enclosed in brackets '[]' (rfc2732)\n");
- fprintf(ofp, "\n");
- fprintf(ofp, "Examples:\n");
- fprintf(ofp, " # lttng create -U net://192.168.1.42\n");
- fprintf(ofp, " Uses TCP and default ports for the given destination.\n");
- fprintf(ofp, " # lttng create -U net6://[fe80::f66d:4ff:fe53:d220]\n");
- fprintf(ofp, " Uses TCP, default ports and IPv6.\n");
- fprintf(ofp, " # lttng create s1 -U net://myhost.com:3229\n");
- fprintf(ofp, " Set the consumer to the remote HOST on port 3229 for control.\n");
- fprintf(ofp, "\n");
-}
+ const char *datetime);
/*
* Retrieve the created session and mi output it based on provided argument
{
int ret;
struct lttng_handle *handle;
- struct lttng_domain dom;
assert(session_name);
/*
- * Set handle with the session name and the domain set to 0. This means to
- * the session daemon that the next action applies on the tracing session
- * rather then the domain specific session.
+ * Set handle with the session_name, but no domain. This implies that
+ * the actions taken with this handle apply on the tracing session
+ * rather then the domain-specific session.
*/
- memset(&dom, 0, sizeof(dom));
-
- handle = lttng_create_handle(session_name, &dom);
+ handle = lttng_create_handle(session_name, NULL);
if (handle == NULL) {
ret = CMD_FATAL;
goto error;
}
ret = lttng_create_session_live(session_name, url, opt_live_timer);
} else {
- ret = _lttng_create_session_ext(session_name, url, datetime, -1);
+ ret = _lttng_create_session_ext(session_name, url, datetime);
}
if (ret < 0) {
/* Don't set ret so lttng can interpret the sessiond error. */
MSG("Default snapshot output set to: %s", print_str_url);
}
MSG("Snapshot mode set. Every channel enabled for that session will "
- "be set in overwrite mode and mmap output.");
+ "be set to mmap output, and default to overwrite mode.");
}
if (opt_shm_path) {
MSG("Session %s set to shm_path: %s.", session_name,
kill(getppid(), SIGTERM); /* wake parent */
exit(EXIT_FAILURE);
} else if (pid > 0) {
- int status;
-
/*
* In daemon mode (--daemonize), sessiond only exits when
* it's ready to accept commands.
*/
for (;;) {
- waitpid(pid, &status, 0);
+ int status;
+ pid_t wait_pid_ret = waitpid(pid, &status, 0);
+
+ if (wait_pid_ret < 0) {
+ if (errno == EINTR) {
+ continue;
+ }
+ PERROR("waitpid");
+ ret = -errno;
+ goto end;
+ }
if (WIFSIGNALED(status)) {
ERR("Session daemon was killed by signal %d",
while ((opt = poptGetNextOpt(pc)) != -1) {
switch (opt) {
case OPT_HELP:
- usage(stdout);
+ SHOW_HELP();
goto end;
case OPT_LIST_OPTIONS:
list_cmd_options(stdout, long_options);
break;
}
default:
- usage(stderr);
ret = CMD_UNDEFINED;
goto end;
}
projects / lttng-tools.git / blobdiff