extern __thread long ust_reg_stack[500];
extern volatile __thread long *ust_reg_stack_ptr;
-
-#ifdef x86_32
-#error "32-bit support broken"
+#ifndef __x86_64
struct registers {
- long eax;
- long ebx;
- long ecx;
- long edx;
- long ebp;
- long esp;
+ short ss;
+ short cs;
long esi;
+ long ebp;
+ long edx;
long edi;
- int xds;
- int xes;
- int xfs;
- int xgs;
- long eip;
- int xcs;
+ long ecx;
+ long ebx;
+ long eax;
long eflags;
- int xss;
+ long esp;
};
-static inline save_registers(struct registers *regs)
-{
-}
+#ifdef CONFIG_UST_GDB_INTEGRATION
+
+/* save_registers - saves most of the processor's registers so
+ * they are available to the probe. gdb uses this to give the
+ * value of local variables.
+ *
+ * Saving all registers without losing any of their values is
+ * tricky.
+ *
+ * We cannot pass to the asm stub the address of a registers structure
+ * on the stack, because it will use a register and override its value.
+ *
+ * We don't want to use a stub to push the regs on the stack and then
+ * another stub to copy them to a structure because changing %sp in asm
+ * and then returning to C (even briefly) can have unexpected results.
+ * Also, gcc might modify %sp between the stubs in reaction to the
+ * register needs of the second stub that needs to know where to copy
+ * the register values.
+ *
+ * So the chosen approach is to use another stack, declared in thread-
+ * local storage, to push the registers. They are subsequently copied
+ * to the stack, by C code.
+ */
+
+#define save_registers(regsptr) \
+ asm volatile ( \
+ /* save original esp */ \
+ "pushl %%esp\n\t" \
+ /* push original eflags */ \
+ "pushfl\n\t" \
+ /* eax will hold the ptr to the private stack bottom */ \
+ "pushl %%eax\n\t" \
+ /* ebx is used for TLS access */ \
+ "pushl %%ebx\n\t" \
+ /* ecx will be used to temporarily hold the stack bottom addr */\
+ "pushl %%ecx\n\t" \
+ /* rdi is the input to __tls_get_addr, and also a temp var */ \
+ "pushl %%edi\n\t" \
+ /* For TLS access, we have to do function calls. However, \
+ * we must not lose the original value of: \
+ * esp, eflags, eax, ebx, ecx, edx, esi, edi, ebp, cs, ss \
+ * \
+ * Some registers' original values have already been saved: \
+ * esp, eflags, eax, ebx, ecx, edi \
+ * \
+ * In addition, the i386 ABI says the following registers belong\
+ * to the caller function: \
+ * esp, ebp, esi, edi, ebx \
+ * \
+ * The following registers should not be changed by the callee: \
+ * cs, ss \
+ * \
+ * Therefore, the following registers must be explicitly \
+ * preserved: \
+ * edx \
+ */ \
+ "pushl %%edx\n\t" \
+ /* Get GOT address */ \
+ "call __i686.get_pc_thunk.bx\n\t" \
+ "addl $_GLOBAL_OFFSET_TABLE_, %%ebx\n\t" \
+ /* Start TLS access of private reg stack pointer */ \
+ "leal ust_reg_stack_ptr@tlsgd(,%%ebx,1),%%eax\n\t" \
+ "call ___tls_get_addr@plt\n\t" \
+ /* --- End TLS access */ \
+ /* check if ust_reg_stack_ptr has been initialized */ \
+ "movl (%%eax),%%ecx\n\t" \
+ "testl %%ecx,%%ecx\n\t" \
+ "jne 1f\n\t" \
+ "movl %%eax,%%ecx\n\t" \
+ /* Save ecx because we are using it. */ \
+ "pushl %%ecx\n\t" \
+ /* Start TLS access of private reg stack */ \
+ "leal ust_reg_stack@tlsgd(,%%ebx,1),%%eax\n\t" \
+ "call ___tls_get_addr@plt\n\t" \
+ /* --- End TLS access */ \
+ "popl %%ecx\n\t" \
+ "addl $500,%%eax\n\t" \
+ "movl %%eax,(%%ecx)\n\t" \
+ "movl %%ecx,%%eax\n\t" \
+ /* now the pointer to the private stack is in eax. \
+ must add stack size so the ptr points to the stack bottom. */ \
+ "1:\n\t" \
+ /* edx was pushed for function calls */ \
+ "popl %%edx\n\t" \
+ /* Manually push esp to private stack */ \
+ "addl $-4,(%%eax)\n\t" \
+ "movl 20(%%esp), %%edi\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movl %%edi, (%%ebx)\n\t" \
+ /* Manually push eflags to private stack */ \
+ "addl $-4,(%%eax)\n\t" \
+ "movl 16(%%esp), %%edi\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movl %%edi, (%%ebx)\n\t" \
+ /* Manually push eax to private stack */ \
+ "addl $-4,(%%eax)\n\t" \
+ "movl 12(%%esp), %%edi\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movl %%edi, (%%ebx)\n\t" \
+ /* Manually push ebx to private stack */ \
+ "addl $-4,(%%eax)\n\t" \
+ "movl 8(%%esp), %%edi\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movl %%edi, (%%ebx)\n\t" \
+ /* Manually push ecx to private stack */ \
+ "addl $-4,(%%eax)\n\t" \
+ "movl 4(%%esp), %%edi\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movl %%edi, (%%ebx)\n\t" \
+ /* Manually push edi to private stack */ \
+ "addl $-4,(%%eax)\n\t" \
+ "movl 0(%%esp), %%edi\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movl %%edi, (%%ebx)\n\t" \
+ /* now push regs to tls */ \
+ /* -- esp already pushed -- */ \
+ /* -- eax already pushed -- */ \
+ /* -- ebx already pushed -- */ \
+ /* -- ecx already pushed -- */ \
+ /* -- edi already pushed -- */ \
+ "addl $-4,(%%eax)\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movl %%edx,(%%ebx)\n\t" \
+ "addl $-4,(%%eax)\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movl %%ebp,(%%ebx)\n\t" \
+ "addl $-4,(%%eax)\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movl %%esi,(%%ebx)\n\t" \
+ /* push cs */ \
+ "addl $-2,(%%eax)\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movw %%cs, (%%ebx)\n\t" \
+ /* push ss */ \
+ "addl $-2,(%%eax)\n\t" \
+ "movl (%%eax), %%ebx\n\t" \
+ "movw %%ss, (%%ebx)\n\t" \
+ /* restore original values of regs that were used internally */ \
+ "popl %%edi\n\t" \
+ "popl %%ecx\n\t" \
+ "popl %%ebx\n\t" \
+ "popl %%eax\n\t" \
+ /* cancel push of rsp */ \
+ "addl $4,%%esp\n\t" \
+ /* cancel push of eflags */ \
+ "addl $4,%%esp\n\t" \
+ ::: "memory"); \
+ memcpy(regsptr, (void *)ust_reg_stack_ptr, sizeof(struct registers)); \
+ ust_reg_stack_ptr = (void *)(((long)ust_reg_stack_ptr) + sizeof(struct registers));
+
+#else /* CONFIG_UST_GDB_INTEGRATION */
+
+#define save_registers(a)
+
+#endif /* CONFIG_UST_GDB_INTEGRATION */
#define RELATIVE_ADDRESS(__rel_label__) __rel_label__
#define _ASM_PTR ".long "
-#else
+#else /* below is code for x86-64 */
struct registers {
int padding; /* 4 bytes */
unsigned long rsp;
};
+#ifdef CONFIG_UST_GDB_INTEGRATION
+
#define save_registers(regsptr) \
asm volatile ( \
/* save original rsp */ \
"pushq %%rbx\n\t" \
/* rdi is the input to __tls_get_addr, and also a temp var */ \
"pushq %%rdi\n\t" \
+ /* For TLS access, we have to do function calls. However, \
+ * we must not lose the original value of: \
+ * rsp, rflags, rax, rbx, rcx, rdx, rsi, rdi, rbp, r8, r9 \
+ * r10, r11, r12, r13, r14, r15, cs, ss \
+ * \
+ * Some registers' original values have already been saved: \
+ * rsp, rflags, rax, rbx, rdi \
+ * \
+ * In addition, the x86-64 ABI says the following registers \
+ * belong to the caller function: \
+ * rbp, rbx, r12, r13, r14, r15 \
+ * \
+ * The following registers should not be changed by the callee: \
+ * cs, ss \
+ * \
+ * Therefore, the following registers must be explicitly \
+ * preserved: \
+ * rcx, rdx, rsi, r8, r9, r10, r11 \
+ */ \
+ "pushq %%rcx\n\t" \
+ "pushq %%rdx\n\t" \
+ "pushq %%rsi\n\t" \
+ "pushq %%r8\n\t" \
+ "pushq %%r9\n\t" \
+ "pushq %%r10\n\t" \
+ "pushq %%r11\n\t" \
/* Start TLS access of private reg stack pointer */ \
".byte 0x66\n\t" \
"leaq ust_reg_stack_ptr@tlsgd(%%rip), %%rdi\n\t" \
/* now the pointer to the private stack is in rax.
must add stack size so the ptr points to the stack bottom. */ \
"1:\n\t" \
+ /* Pop regs that were pushed for function calls */ \
+ "popq %%r11\n\t" \
+ "popq %%r10\n\t" \
+ "popq %%r9\n\t" \
+ "popq %%r8\n\t" \
+ "popq %%rsi\n\t" \
+ "popq %%rdx\n\t" \
+ "popq %%rcx\n\t" \
/* Manually push rsp to private stack */ \
"addq $-8,(%%rax)\n\t" \
"movq 32(%%rsp), %%rdi\n\t" \
memcpy(regsptr, (void *)ust_reg_stack_ptr, sizeof(struct registers)); \
ust_reg_stack_ptr = (void *)(((long)ust_reg_stack_ptr) + sizeof(struct registers));
+#else /* CONFIG_UST_GDB_INTEGRATION */
+
+#define save_registers(a)
+
+#endif /* CONFIG_UST_GDB_INTEGRATION */
+
/* Macro to insert the address of a relative jump in an assembly stub,
* in a relocatable way. On x86-64, this uses a special (%rip) notation. */
#define RELATIVE_ADDRESS(__rel_label__) __rel_label__(%%rip)