| 1 | /* This file is part of the Linux Trace Toolkit viewer |
| 2 | * Copyright (C) 2009, 2010 Benjamin Poirier <benjamin.poirier@polymtl.ca> |
| 3 | * |
| 4 | * This program is free software: you can redistribute it and/or modify it |
| 5 | * under the terms of the GNU Lesser General Public License as published by |
| 6 | * the Free Software Foundation, either version 2.1 of the License, or (at |
| 7 | * your option) any later version. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, but WITHOUT |
| 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public |
| 12 | * License for more details. |
| 13 | * |
| 14 | * You should have received a copy of the GNU Lesser General Public License |
| 15 | * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| 16 | */ |
| 17 | #define _ISOC99_SOURCE |
| 18 | |
| 19 | #ifdef HAVE_CONFIG_H |
| 20 | #include <config.h> |
| 21 | #endif |
| 22 | |
| 23 | #include <errno.h> |
| 24 | #include <inttypes.h> |
| 25 | #include <math.h> |
| 26 | #include <float.h> |
| 27 | #include <stdlib.h> |
| 28 | #include <stdio.h> |
| 29 | #include <string.h> |
| 30 | #include <unistd.h> |
| 31 | |
| 32 | #include "sync_chain.h" |
| 33 | |
| 34 | #include "event_analysis_chull.h" |
| 35 | |
| 36 | |
| 37 | typedef enum |
| 38 | { |
| 39 | LOWER, |
| 40 | UPPER |
| 41 | } HullType; |
| 42 | |
| 43 | |
| 44 | typedef enum |
| 45 | { |
| 46 | MINIMUM, |
| 47 | MAXIMUM |
| 48 | } LineType; |
| 49 | |
| 50 | |
| 51 | // Functions common to all analysis modules |
| 52 | static void initAnalysisCHull(SyncState* const syncState); |
| 53 | static void destroyAnalysisCHull(SyncState* const syncState); |
| 54 | |
| 55 | static void analyzeMessageCHull(SyncState* const syncState, Message* const |
| 56 | message); |
| 57 | static GArray* finalizeAnalysisCHull(SyncState* const syncState); |
| 58 | static void printAnalysisStatsCHull(SyncState* const syncState); |
| 59 | static void writeAnalysisGraphsPlotsCHull(SyncState* const syncState, const |
| 60 | unsigned int i, const unsigned int j); |
| 61 | |
| 62 | // Functions specific to this module |
| 63 | static void openGraphFiles(SyncState* const syncState); |
| 64 | static void closeGraphFiles(SyncState* const syncState); |
| 65 | static void writeGraphFiles(SyncState* const syncState); |
| 66 | static void gfDumpHullToFile(gpointer data, gpointer userData); |
| 67 | |
| 68 | static void grahamScan(GQueue* const hull, Point* const newPoint, const |
| 69 | HullType type); |
| 70 | static int jointCmp(const Point* const p1, const Point* const p2, const Point* |
| 71 | const p3) __attribute__((pure)); |
| 72 | static double crossProductK(const Point const* p1, const Point const* p2, |
| 73 | const Point const* p3, const Point const* p4) __attribute__((pure)); |
| 74 | static Factors* calculateFactorsExact(GQueue* const cu, GQueue* const cl, const |
| 75 | LineType lineType) __attribute__((pure)); |
| 76 | static void calculateFactorsFallback(GQueue* const cr, GQueue* const cs, |
| 77 | FactorsCHull* const result); |
| 78 | static double slope(const Point* const p1, const Point* const p2) |
| 79 | __attribute__((pure)); |
| 80 | static double intercept(const Point* const p1, const Point* const p2) |
| 81 | __attribute__((pure)); |
| 82 | static GArray* reduceFactors(SyncState* const syncState, FactorsCHull** |
| 83 | allFactors); |
| 84 | static double verticalDistance(Point* p1, Point* p2, Point* const point) |
| 85 | __attribute__((pure)); |
| 86 | static void floydWarshall(SyncState* const syncState, FactorsCHull** const |
| 87 | allFactors, double*** const distances, unsigned int*** const |
| 88 | predecessors); |
| 89 | static void getFactors(FactorsCHull** const allFactors, unsigned int** const |
| 90 | predecessors, unsigned int* const references, const unsigned int traceNum, |
| 91 | Factors* const factors); |
| 92 | |
| 93 | static void gfPointDestroy(gpointer data, gpointer userData); |
| 94 | |
| 95 | |
| 96 | static AnalysisModule analysisModuleCHull= { |
| 97 | .name= "chull", |
| 98 | .initAnalysis= &initAnalysisCHull, |
| 99 | .destroyAnalysis= &destroyAnalysisCHull, |
| 100 | .analyzeMessage= &analyzeMessageCHull, |
| 101 | .finalizeAnalysis= &finalizeAnalysisCHull, |
| 102 | .printAnalysisStats= &printAnalysisStatsCHull, |
| 103 | .graphFunctions= { |
| 104 | .writeTraceTraceForePlots= &writeAnalysisGraphsPlotsCHull, |
| 105 | } |
| 106 | }; |
| 107 | |
| 108 | const char* const approxNames[]= { |
| 109 | [EXACT]= "Exact", |
| 110 | [MIDDLE]= "Middle", |
| 111 | [FALLBACK]= "Fallback", |
| 112 | [INCOMPLETE]= "Incomplete", |
| 113 | [ABSENT]= "Absent", |
| 114 | [SCREWED]= "Screwed", |
| 115 | }; |
| 116 | |
| 117 | |
| 118 | /* |
| 119 | * Analysis module registering function |
| 120 | */ |
| 121 | void registerAnalysisCHull() |
| 122 | { |
| 123 | g_queue_push_tail(&analysisModules, &analysisModuleCHull); |
| 124 | } |
| 125 | |
| 126 | |
| 127 | /* |
| 128 | * Analysis init function |
| 129 | * |
| 130 | * This function is called at the beginning of a synchronization run for a set |
| 131 | * of traces. |
| 132 | * |
| 133 | * Allocate some of the analysis specific data structures |
| 134 | * |
| 135 | * Args: |
| 136 | * syncState container for synchronization data. |
| 137 | * This function allocates or initializes these analysisData |
| 138 | * members: |
| 139 | * hullArray |
| 140 | * dropped |
| 141 | */ |
| 142 | static void initAnalysisCHull(SyncState* const syncState) |
| 143 | { |
| 144 | unsigned int i, j; |
| 145 | AnalysisDataCHull* analysisData; |
| 146 | |
| 147 | analysisData= malloc(sizeof(AnalysisDataCHull)); |
| 148 | syncState->analysisData= analysisData; |
| 149 | |
| 150 | analysisData->hullArray= malloc(syncState->traceNb * sizeof(GQueue**)); |
| 151 | for (i= 0; i < syncState->traceNb; i++) |
| 152 | { |
| 153 | analysisData->hullArray[i]= malloc(syncState->traceNb * sizeof(GQueue*)); |
| 154 | |
| 155 | for (j= 0; j < syncState->traceNb; j++) |
| 156 | { |
| 157 | analysisData->hullArray[i][j]= g_queue_new(); |
| 158 | } |
| 159 | } |
| 160 | |
| 161 | if (syncState->stats) |
| 162 | { |
| 163 | analysisData->stats= malloc(sizeof(AnalysisStatsCHull)); |
| 164 | analysisData->stats->dropped= 0; |
| 165 | analysisData->stats->allFactors= NULL; |
| 166 | } |
| 167 | |
| 168 | if (syncState->graphsStream) |
| 169 | { |
| 170 | analysisData->graphsData= malloc(sizeof(AnalysisGraphsDataCHull)); |
| 171 | openGraphFiles(syncState); |
| 172 | analysisData->graphsData->allFactors= NULL; |
| 173 | } |
| 174 | } |
| 175 | |
| 176 | |
| 177 | /* |
| 178 | * Create and open files used to store convex hull points to genereate |
| 179 | * graphs. Allocate and populate array to store file pointers. |
| 180 | * |
| 181 | * Args: |
| 182 | * syncState: container for synchronization data |
| 183 | */ |
| 184 | static void openGraphFiles(SyncState* const syncState) |
| 185 | { |
| 186 | unsigned int i, j; |
| 187 | int retval; |
| 188 | char* cwd; |
| 189 | char name[31]; |
| 190 | AnalysisDataCHull* analysisData; |
| 191 | |
| 192 | analysisData= (AnalysisDataCHull*) syncState->analysisData; |
| 193 | |
| 194 | cwd= changeToGraphsDir(syncState->graphsDir); |
| 195 | |
| 196 | analysisData->graphsData->hullPoints= malloc(syncState->traceNb * |
| 197 | sizeof(FILE**)); |
| 198 | for (i= 0; i < syncState->traceNb; i++) |
| 199 | { |
| 200 | analysisData->graphsData->hullPoints[i]= malloc(syncState->traceNb * |
| 201 | sizeof(FILE*)); |
| 202 | for (j= 0; j < syncState->traceNb; j++) |
| 203 | { |
| 204 | if (i != j) |
| 205 | { |
| 206 | retval= snprintf(name, sizeof(name), |
| 207 | "analysis_chull-%03u_to_%03u.data", j, i); |
| 208 | if (retval > sizeof(name) - 1) |
| 209 | { |
| 210 | name[sizeof(name) - 1]= '\0'; |
| 211 | } |
| 212 | if ((analysisData->graphsData->hullPoints[i][j]= fopen(name, "w")) == |
| 213 | NULL) |
| 214 | { |
| 215 | g_error(strerror(errno)); |
| 216 | } |
| 217 | } |
| 218 | } |
| 219 | } |
| 220 | |
| 221 | retval= chdir(cwd); |
| 222 | if (retval == -1) |
| 223 | { |
| 224 | g_error(strerror(errno)); |
| 225 | } |
| 226 | free(cwd); |
| 227 | } |
| 228 | |
| 229 | |
| 230 | /* |
| 231 | * Write hull points to files to generate graphs. |
| 232 | * |
| 233 | * Args: |
| 234 | * syncState: container for synchronization data |
| 235 | */ |
| 236 | static void writeGraphFiles(SyncState* const syncState) |
| 237 | { |
| 238 | unsigned int i, j; |
| 239 | AnalysisDataCHull* analysisData; |
| 240 | |
| 241 | analysisData= (AnalysisDataCHull*) syncState->analysisData; |
| 242 | |
| 243 | for (i= 0; i < syncState->traceNb; i++) |
| 244 | { |
| 245 | for (j= 0; j < syncState->traceNb; j++) |
| 246 | { |
| 247 | if (i != j) |
| 248 | { |
| 249 | g_queue_foreach(analysisData->hullArray[i][j], |
| 250 | &gfDumpHullToFile, |
| 251 | analysisData->graphsData->hullPoints[i][j]); |
| 252 | } |
| 253 | } |
| 254 | } |
| 255 | } |
| 256 | |
| 257 | |
| 258 | /* |
| 259 | * A GFunc for g_queue_foreach. Write a hull point to a file used to generate |
| 260 | * graphs |
| 261 | * |
| 262 | * Args: |
| 263 | * data: Point*, point to write to the file |
| 264 | * userData: FILE*, file pointer where to write the point |
| 265 | */ |
| 266 | static void gfDumpHullToFile(gpointer data, gpointer userData) |
| 267 | { |
| 268 | Point* point; |
| 269 | |
| 270 | point= (Point*) data; |
| 271 | fprintf((FILE*) userData, "%20" PRIu64 " %20" PRIu64 "\n", point->x, point->y); |
| 272 | } |
| 273 | |
| 274 | |
| 275 | /* |
| 276 | * Close files used to store convex hull points to generate graphs. |
| 277 | * Deallocate array to store file pointers. |
| 278 | * |
| 279 | * Args: |
| 280 | * syncState: container for synchronization data |
| 281 | */ |
| 282 | static void closeGraphFiles(SyncState* const syncState) |
| 283 | { |
| 284 | unsigned int i, j; |
| 285 | AnalysisDataCHull* analysisData; |
| 286 | int retval; |
| 287 | |
| 288 | analysisData= (AnalysisDataCHull*) syncState->analysisData; |
| 289 | |
| 290 | if (analysisData->graphsData->hullPoints == NULL) |
| 291 | { |
| 292 | return; |
| 293 | } |
| 294 | |
| 295 | for (i= 0; i < syncState->traceNb; i++) |
| 296 | { |
| 297 | for (j= 0; j < syncState->traceNb; j++) |
| 298 | { |
| 299 | if (i != j) |
| 300 | { |
| 301 | retval= fclose(analysisData->graphsData->hullPoints[i][j]); |
| 302 | if (retval != 0) |
| 303 | { |
| 304 | g_error(strerror(errno)); |
| 305 | } |
| 306 | } |
| 307 | } |
| 308 | free(analysisData->graphsData->hullPoints[i]); |
| 309 | } |
| 310 | free(analysisData->graphsData->hullPoints); |
| 311 | analysisData->graphsData->hullPoints= NULL; |
| 312 | } |
| 313 | |
| 314 | |
| 315 | /* |
| 316 | * Analysis destroy function |
| 317 | * |
| 318 | * Free the analysis specific data structures |
| 319 | * |
| 320 | * Args: |
| 321 | * syncState container for synchronization data. |
| 322 | * This function deallocates these analysisData members: |
| 323 | * hullArray |
| 324 | * stDev |
| 325 | */ |
| 326 | static void destroyAnalysisCHull(SyncState* const syncState) |
| 327 | { |
| 328 | unsigned int i, j; |
| 329 | AnalysisDataCHull* analysisData; |
| 330 | |
| 331 | analysisData= (AnalysisDataCHull*) syncState->analysisData; |
| 332 | |
| 333 | if (analysisData == NULL) |
| 334 | { |
| 335 | return; |
| 336 | } |
| 337 | |
| 338 | for (i= 0; i < syncState->traceNb; i++) |
| 339 | { |
| 340 | for (j= 0; j < syncState->traceNb; j++) |
| 341 | { |
| 342 | g_queue_foreach(analysisData->hullArray[i][j], gfPointDestroy, NULL); |
| 343 | g_queue_free(analysisData->hullArray[i][j]); |
| 344 | } |
| 345 | free(analysisData->hullArray[i]); |
| 346 | } |
| 347 | free(analysisData->hullArray); |
| 348 | |
| 349 | if (syncState->stats) |
| 350 | { |
| 351 | if (analysisData->stats->allFactors != NULL) |
| 352 | { |
| 353 | freeAllFactors(syncState->traceNb, analysisData->stats->allFactors); |
| 354 | } |
| 355 | |
| 356 | free(analysisData->stats); |
| 357 | } |
| 358 | |
| 359 | if (syncState->graphsStream) |
| 360 | { |
| 361 | if (analysisData->graphsData->hullPoints != NULL) |
| 362 | { |
| 363 | closeGraphFiles(syncState); |
| 364 | } |
| 365 | |
| 366 | if (!syncState->stats && analysisData->graphsData->allFactors != NULL) |
| 367 | { |
| 368 | freeAllFactors(syncState->traceNb, analysisData->graphsData->allFactors); |
| 369 | } |
| 370 | |
| 371 | free(analysisData->graphsData); |
| 372 | } |
| 373 | |
| 374 | free(syncState->analysisData); |
| 375 | syncState->analysisData= NULL; |
| 376 | } |
| 377 | |
| 378 | |
| 379 | /* |
| 380 | * Perform analysis on an event pair. |
| 381 | * |
| 382 | * Args: |
| 383 | * syncState container for synchronization data |
| 384 | * message structure containing the events |
| 385 | */ |
| 386 | static void analyzeMessageCHull(SyncState* const syncState, Message* const message) |
| 387 | { |
| 388 | AnalysisDataCHull* analysisData; |
| 389 | Point* newPoint; |
| 390 | HullType hullType; |
| 391 | GQueue* hull; |
| 392 | |
| 393 | analysisData= (AnalysisDataCHull*) syncState->analysisData; |
| 394 | |
| 395 | newPoint= malloc(sizeof(Point)); |
| 396 | if (message->inE->traceNum < message->outE->traceNum) |
| 397 | { |
| 398 | // CA is inE->traceNum |
| 399 | newPoint->x= message->inE->cpuTime; |
| 400 | newPoint->y= message->outE->cpuTime; |
| 401 | hullType= UPPER; |
| 402 | g_debug("Reception point hullArray[%lu][%lu] " |
| 403 | "x= inE->time= %" PRIu64 " y= outE->time= %" PRIu64, |
| 404 | message->inE->traceNum, message->outE->traceNum, newPoint->x, |
| 405 | newPoint->y); |
| 406 | } |
| 407 | else |
| 408 | { |
| 409 | // CA is outE->traceNum |
| 410 | newPoint->x= message->outE->cpuTime; |
| 411 | newPoint->y= message->inE->cpuTime; |
| 412 | hullType= LOWER; |
| 413 | g_debug("Send point hullArray[%lu][%lu] " |
| 414 | "x= inE->time= %" PRIu64 " y= outE->time= %" PRIu64, |
| 415 | message->inE->traceNum, message->outE->traceNum, newPoint->x, |
| 416 | newPoint->y); |
| 417 | } |
| 418 | |
| 419 | hull= |
| 420 | analysisData->hullArray[message->inE->traceNum][message->outE->traceNum]; |
| 421 | |
| 422 | if (hull->length >= 1 && newPoint->x < ((Point*) |
| 423 | g_queue_peek_tail(hull))->x) |
| 424 | { |
| 425 | if (syncState->stats) |
| 426 | { |
| 427 | analysisData->stats->dropped++; |
| 428 | } |
| 429 | |
| 430 | free(newPoint); |
| 431 | } |
| 432 | else |
| 433 | { |
| 434 | grahamScan(hull, newPoint, hullType); |
| 435 | } |
| 436 | } |
| 437 | |
| 438 | |
| 439 | /* |
| 440 | * Construct one half of a convex hull from abscissa-sorted points |
| 441 | * |
| 442 | * Args: |
| 443 | * hull: the points already in the hull |
| 444 | * newPoint: a new point to consider |
| 445 | * type: which half of the hull to construct |
| 446 | */ |
| 447 | static void grahamScan(GQueue* const hull, Point* const newPoint, const |
| 448 | HullType type) |
| 449 | { |
| 450 | int inversionFactor; |
| 451 | |
| 452 | g_debug("grahamScan(hull (length: %u), newPoint, %s)", hull->length, type |
| 453 | == LOWER ? "LOWER" : "UPPER"); |
| 454 | |
| 455 | if (type == LOWER) |
| 456 | { |
| 457 | inversionFactor= 1; |
| 458 | } |
| 459 | else |
| 460 | { |
| 461 | inversionFactor= -1; |
| 462 | } |
| 463 | |
| 464 | if (hull->length >= 2) |
| 465 | { |
| 466 | g_debug("jointCmp(hull[%u], hull[%u], newPoint) * inversionFactor = %d * %d = %d", |
| 467 | hull->length - 2, |
| 468 | hull->length - 1, |
| 469 | jointCmp(g_queue_peek_nth(hull, hull->length - 2), |
| 470 | g_queue_peek_tail(hull), newPoint), |
| 471 | inversionFactor, |
| 472 | jointCmp(g_queue_peek_nth(hull, hull->length - 2), |
| 473 | g_queue_peek_tail(hull), newPoint) * inversionFactor); |
| 474 | } |
| 475 | while (hull->length >= 2 && jointCmp(g_queue_peek_nth(hull, hull->length - |
| 476 | 2), g_queue_peek_tail(hull), newPoint) * inversionFactor <= 0) |
| 477 | { |
| 478 | g_debug("Removing hull[%u]", hull->length); |
| 479 | free((Point*) g_queue_pop_tail(hull)); |
| 480 | |
| 481 | if (hull->length >= 2) |
| 482 | { |
| 483 | g_debug("jointCmp(hull[%u], hull[%u], newPoint) * inversionFactor = %d * %d = %d", |
| 484 | hull->length - 2, |
| 485 | hull->length - 1, |
| 486 | jointCmp(g_queue_peek_nth(hull, hull->length - 2), |
| 487 | g_queue_peek_tail(hull), newPoint), |
| 488 | inversionFactor, |
| 489 | jointCmp(g_queue_peek_nth(hull, hull->length - 2), |
| 490 | g_queue_peek_tail(hull), newPoint) * inversionFactor); |
| 491 | } |
| 492 | } |
| 493 | g_queue_push_tail(hull, newPoint); |
| 494 | } |
| 495 | |
| 496 | |
| 497 | /* |
| 498 | * Finalize the factor calculations |
| 499 | * |
| 500 | * Args: |
| 501 | * syncState container for synchronization data. |
| 502 | * |
| 503 | * Returns: |
| 504 | * Factors[traceNb] synchronization factors for each trace |
| 505 | */ |
| 506 | static GArray* finalizeAnalysisCHull(SyncState* const syncState) |
| 507 | { |
| 508 | AnalysisDataCHull* analysisData; |
| 509 | GArray* factors; |
| 510 | FactorsCHull** allFactors; |
| 511 | |
| 512 | analysisData= (AnalysisDataCHull*) syncState->analysisData; |
| 513 | |
| 514 | if (syncState->graphsStream && analysisData->graphsData->hullPoints != NULL) |
| 515 | { |
| 516 | writeGraphFiles(syncState); |
| 517 | closeGraphFiles(syncState); |
| 518 | } |
| 519 | |
| 520 | allFactors= calculateAllFactors(syncState); |
| 521 | |
| 522 | factors= reduceFactors(syncState, allFactors); |
| 523 | |
| 524 | if (syncState->stats || syncState->graphsStream) |
| 525 | { |
| 526 | if (syncState->stats) |
| 527 | { |
| 528 | analysisData->stats->allFactors= allFactors; |
| 529 | } |
| 530 | |
| 531 | if (syncState->graphsStream) |
| 532 | { |
| 533 | analysisData->graphsData->allFactors= allFactors; |
| 534 | } |
| 535 | } |
| 536 | else |
| 537 | { |
| 538 | freeAllFactors(syncState->traceNb, allFactors); |
| 539 | } |
| 540 | |
| 541 | return factors; |
| 542 | } |
| 543 | |
| 544 | |
| 545 | /* |
| 546 | * Print statistics related to analysis. Must be called after |
| 547 | * finalizeAnalysis. |
| 548 | * |
| 549 | * Args: |
| 550 | * syncState container for synchronization data. |
| 551 | */ |
| 552 | static void printAnalysisStatsCHull(SyncState* const syncState) |
| 553 | { |
| 554 | AnalysisDataCHull* analysisData; |
| 555 | unsigned int i, j; |
| 556 | |
| 557 | if (!syncState->stats) |
| 558 | { |
| 559 | return; |
| 560 | } |
| 561 | |
| 562 | analysisData= (AnalysisDataCHull*) syncState->analysisData; |
| 563 | |
| 564 | printf("Convex hull analysis stats:\n"); |
| 565 | printf("\tout of order packets dropped from analysis: %u\n", |
| 566 | analysisData->stats->dropped); |
| 567 | |
| 568 | printf("\tNumber of points in convex hulls:\n"); |
| 569 | |
| 570 | for (i= 0; i < syncState->traceNb; i++) |
| 571 | { |
| 572 | for (j= i + 1; j < syncState->traceNb; j++) |
| 573 | { |
| 574 | printf("\t\t%3d - %-3d: lower half-hull %-5u upper half-hull %-5u\n", |
| 575 | i, j, analysisData->hullArray[j][i]->length, |
| 576 | analysisData->hullArray[i][j]->length); |
| 577 | } |
| 578 | } |
| 579 | |
| 580 | printf("\tIndividual synchronization factors:\n"); |
| 581 | |
| 582 | for (i= 0; i < syncState->traceNb; i++) |
| 583 | { |
| 584 | for (j= i + 1; j < syncState->traceNb; j++) |
| 585 | { |
| 586 | FactorsCHull* factorsCHull; |
| 587 | |
| 588 | factorsCHull= &analysisData->stats->allFactors[j][i]; |
| 589 | printf("\t\t%3d - %-3d: %s", i, j, |
| 590 | approxNames[factorsCHull->type]); |
| 591 | |
| 592 | if (factorsCHull->type == EXACT) |
| 593 | { |
| 594 | printf(" a0= % 7g a1= 1 %c %7g\n", |
| 595 | factorsCHull->approx->offset, |
| 596 | factorsCHull->approx->drift < 0. ? '-' : '+', |
| 597 | fabs(factorsCHull->approx->drift)); |
| 598 | } |
| 599 | else if (factorsCHull->type == MIDDLE) |
| 600 | { |
| 601 | printf(" a0= % 7g a1= 1 %c %7g accuracy %7g\n", |
| 602 | factorsCHull->approx->offset, factorsCHull->approx->drift |
| 603 | - 1. < 0. ? '-' : '+', fabs(factorsCHull->approx->drift - |
| 604 | 1.), factorsCHull->accuracy); |
| 605 | printf("\t\t a0: % 7g to % 7g (delta= %7g)\n", |
| 606 | factorsCHull->max->offset, factorsCHull->min->offset, |
| 607 | factorsCHull->min->offset - factorsCHull->max->offset); |
| 608 | printf("\t\t a1: 1 %+7g to %+7g (delta= %7g)\n", |
| 609 | factorsCHull->min->drift - 1., factorsCHull->max->drift - |
| 610 | 1., factorsCHull->max->drift - factorsCHull->min->drift); |
| 611 | } |
| 612 | else if (factorsCHull->type == FALLBACK) |
| 613 | { |
| 614 | printf(" a0= % 7g a1= 1 %c %7g error= %7g\n", |
| 615 | factorsCHull->approx->offset, factorsCHull->approx->drift |
| 616 | - 1. < 0. ? '-' : '+', fabs(factorsCHull->approx->drift - |
| 617 | 1.), factorsCHull->accuracy); |
| 618 | } |
| 619 | else if (factorsCHull->type == INCOMPLETE) |
| 620 | { |
| 621 | printf("\n"); |
| 622 | |
| 623 | if (factorsCHull->min->drift != -INFINITY) |
| 624 | { |
| 625 | printf("\t\t min: a0: % 7g a1: 1 %c %7g\n", |
| 626 | factorsCHull->min->offset, factorsCHull->min->drift - |
| 627 | 1. < 0 ? '-' : '+', fabs(factorsCHull->min->drift - |
| 628 | 1.)); |
| 629 | } |
| 630 | if (factorsCHull->max->drift != INFINITY) |
| 631 | { |
| 632 | printf("\t\t max: a0: % 7g a1: 1 %c %7g\n", |
| 633 | factorsCHull->max->offset, factorsCHull->max->drift - |
| 634 | 1. < 0 ? '-' : '+', fabs(factorsCHull->max->drift - |
| 635 | 1.)); |
| 636 | } |
| 637 | } |
| 638 | else if (factorsCHull->type == SCREWED) |
| 639 | { |
| 640 | printf("\n"); |
| 641 | |
| 642 | if (factorsCHull->min != NULL && factorsCHull->min->drift != -INFINITY) |
| 643 | { |
| 644 | printf("\t\t min: a0: % 7g a1: 1 %c %7g\n", |
| 645 | factorsCHull->min->offset, factorsCHull->min->drift - |
| 646 | 1. < 0 ? '-' : '+', fabs(factorsCHull->min->drift - |
| 647 | 1.)); |
| 648 | } |
| 649 | if (factorsCHull->max != NULL && factorsCHull->max->drift != INFINITY) |
| 650 | { |
| 651 | printf("\t\t max: a0: % 7g a1: 1 %c %7g\n", |
| 652 | factorsCHull->max->offset, factorsCHull->max->drift - |
| 653 | 1. < 0 ? '-' : '+', fabs(factorsCHull->max->drift - |
| 654 | 1.)); |
| 655 | } |
| 656 | } |
| 657 | else if (factorsCHull->type == ABSENT) |
| 658 | { |
| 659 | printf("\n"); |
| 660 | } |
| 661 | else |
| 662 | { |
| 663 | g_assert_not_reached(); |
| 664 | } |
| 665 | } |
| 666 | } |
| 667 | } |
| 668 | |
| 669 | |
| 670 | /* |
| 671 | * A GFunc for g_queue_foreach() |
| 672 | * |
| 673 | * Args: |
| 674 | * data Point*, point to destroy |
| 675 | * user_data NULL |
| 676 | */ |
| 677 | static void gfPointDestroy(gpointer data, gpointer userData) |
| 678 | { |
| 679 | Point* point; |
| 680 | |
| 681 | point= (Point*) data; |
| 682 | free(point); |
| 683 | } |
| 684 | |
| 685 | |
| 686 | /* |
| 687 | * Find out if a sequence of three points constitutes a "left turn" or a |
| 688 | * "right turn". |
| 689 | * |
| 690 | * Args: |
| 691 | * p1, p2, p3: The three points. |
| 692 | * |
| 693 | * Returns: |
| 694 | * < 0 right turn |
| 695 | * 0 colinear (unlikely result since this uses floating point |
| 696 | * arithmetic) |
| 697 | * > 0 left turn |
| 698 | */ |
| 699 | static int jointCmp(const Point const* p1, const Point const* p2, const |
| 700 | Point const* p3) |
| 701 | { |
| 702 | double result; |
| 703 | const double fuzzFactor= 0.; |
| 704 | |
| 705 | result= crossProductK(p1, p2, p1, p3); |
| 706 | g_debug("crossProductK(p1= (%" PRIu64 ", %" PRIu64 "), " |
| 707 | "p2= (%" PRIu64 ", %" PRIu64 "), p1= (%" PRIu64 ", %" PRIu64 "), " |
| 708 | "p3= (%" PRIu64 ", %" PRIu64 "))= %g", |
| 709 | p1->x, p1->y, p2->x, p2->y, p1->x, p1->y, p3->x, p3->y, result); |
| 710 | if (result < fuzzFactor) |
| 711 | { |
| 712 | return -1; |
| 713 | } |
| 714 | else if (result > fuzzFactor) |
| 715 | { |
| 716 | return 1; |
| 717 | } |
| 718 | else |
| 719 | { |
| 720 | return 0; |
| 721 | } |
| 722 | } |
| 723 | |
| 724 | |
| 725 | /* |
| 726 | * Calculate the k component of the cross product of two vectors. |
| 727 | * |
| 728 | * Args: |
| 729 | * p1, p2: start and end points of the first vector |
| 730 | * p3, p4: start and end points of the second vector |
| 731 | * |
| 732 | * Returns: |
| 733 | * the k component of the cross product when considering the two vectors to |
| 734 | * be in the i-j plane. The direction (sign) of the result can be useful to |
| 735 | * determine the relative orientation of the two vectors. |
| 736 | */ |
| 737 | static double crossProductK(const Point const* p1, const Point const* p2, |
| 738 | const Point const* p3, const Point const* p4) |
| 739 | { |
| 740 | return ((double) p2->x - p1->x) * ((double) p4->y - p3->y) - ((double) |
| 741 | p2->y - p1->y) * ((double) p4->x - p3->x); |
| 742 | } |
| 743 | |
| 744 | |
| 745 | /* |
| 746 | * Free a container of FactorsCHull |
| 747 | * |
| 748 | * Args: |
| 749 | * traceNb: number of traces |
| 750 | * allFactors: container of FactorsCHull |
| 751 | */ |
| 752 | void freeAllFactors(const unsigned int traceNb, FactorsCHull** const |
| 753 | allFactors) |
| 754 | { |
| 755 | unsigned int i, j; |
| 756 | |
| 757 | for (i= 0; i < traceNb; i++) |
| 758 | { |
| 759 | for (j= 0; j <= i; j++) |
| 760 | { |
| 761 | destroyFactorsCHull(&allFactors[i][j]); |
| 762 | } |
| 763 | free(allFactors[i]); |
| 764 | } |
| 765 | free(allFactors); |
| 766 | } |
| 767 | |
| 768 | |
| 769 | /* |
| 770 | * Free a FactorsCHull |
| 771 | * |
| 772 | * Args: |
| 773 | * factorsCHull: container of Factors |
| 774 | */ |
| 775 | void destroyFactorsCHull(FactorsCHull* factorsCHull) |
| 776 | { |
| 777 | if (factorsCHull->type == MIDDLE || factorsCHull->type == |
| 778 | INCOMPLETE || factorsCHull->type == ABSENT) |
| 779 | { |
| 780 | free(factorsCHull->min); |
| 781 | free(factorsCHull->max); |
| 782 | } |
| 783 | else if (factorsCHull->type == SCREWED) |
| 784 | { |
| 785 | if (factorsCHull->min != NULL) |
| 786 | { |
| 787 | free(factorsCHull->min); |
| 788 | } |
| 789 | if (factorsCHull->max != NULL) |
| 790 | { |
| 791 | free(factorsCHull->max); |
| 792 | } |
| 793 | } |
| 794 | |
| 795 | if (factorsCHull->type == EXACT || factorsCHull->type == MIDDLE || |
| 796 | factorsCHull->type == FALLBACK) |
| 797 | { |
| 798 | free(factorsCHull->approx); |
| 799 | } |
| 800 | } |
| 801 | |
| 802 | |
| 803 | /* |
| 804 | * Analyze the convex hulls to determine the synchronization factors between |
| 805 | * each pair of trace. |
| 806 | * |
| 807 | * Args: |
| 808 | * syncState container for synchronization data. |
| 809 | * |
| 810 | * Returns: |
| 811 | * FactorsCHull*[TraceNum][TraceNum] array. See the documentation for the |
| 812 | * member allFactors of AnalysisStatsCHull. |
| 813 | */ |
| 814 | FactorsCHull** calculateAllFactors(SyncState* const syncState) |
| 815 | { |
| 816 | unsigned int traceNumA, traceNumB; |
| 817 | FactorsCHull** allFactors; |
| 818 | AnalysisDataCHull* analysisData; |
| 819 | |
| 820 | analysisData= (AnalysisDataCHull*) syncState->analysisData; |
| 821 | |
| 822 | // Allocate allFactors and calculate min and max |
| 823 | allFactors= malloc(syncState->traceNb * sizeof(FactorsCHull*)); |
| 824 | for (traceNumA= 0; traceNumA < syncState->traceNb; traceNumA++) |
| 825 | { |
| 826 | allFactors[traceNumA]= malloc((traceNumA + 1) * sizeof(FactorsCHull)); |
| 827 | |
| 828 | allFactors[traceNumA][traceNumA].type= EXACT; |
| 829 | allFactors[traceNumA][traceNumA].approx= malloc(sizeof(Factors)); |
| 830 | allFactors[traceNumA][traceNumA].approx->drift= 1.; |
| 831 | allFactors[traceNumA][traceNumA].approx->offset= 0.; |
| 832 | |
| 833 | for (traceNumB= 0; traceNumB < traceNumA; traceNumB++) |
| 834 | { |
| 835 | unsigned int i; |
| 836 | GQueue* cs, * cr; |
| 837 | const struct |
| 838 | { |
| 839 | LineType lineType; |
| 840 | size_t factorsOffset; |
| 841 | } loopValues[]= { |
| 842 | {MINIMUM, offsetof(FactorsCHull, min)}, |
| 843 | {MAXIMUM, offsetof(FactorsCHull, max)} |
| 844 | }; |
| 845 | |
| 846 | cr= analysisData->hullArray[traceNumB][traceNumA]; |
| 847 | cs= analysisData->hullArray[traceNumA][traceNumB]; |
| 848 | |
| 849 | for (i= 0; i < sizeof(loopValues) / sizeof(*loopValues); i++) |
| 850 | { |
| 851 | g_debug("allFactors[%u][%u].%s = calculateFactorsExact(cr= hullArray[%u][%u], cs= hullArray[%u][%u], %s)", |
| 852 | traceNumA, traceNumB, loopValues[i].factorsOffset == |
| 853 | offsetof(FactorsCHull, min) ? "min" : "max", traceNumB, |
| 854 | traceNumA, traceNumA, traceNumB, loopValues[i].lineType == |
| 855 | MINIMUM ? "MINIMUM" : "MAXIMUM"); |
| 856 | *((Factors**) ((void*) &allFactors[traceNumA][traceNumB] + |
| 857 | loopValues[i].factorsOffset))= |
| 858 | calculateFactorsExact(cr, cs, loopValues[i].lineType); |
| 859 | } |
| 860 | } |
| 861 | } |
| 862 | |
| 863 | // Calculate approx when possible |
| 864 | for (traceNumA= 0; traceNumA < syncState->traceNb; traceNumA++) |
| 865 | { |
| 866 | for (traceNumB= 0; traceNumB < traceNumA; traceNumB++) |
| 867 | { |
| 868 | FactorsCHull* factorsCHull; |
| 869 | |
| 870 | factorsCHull= &allFactors[traceNumA][traceNumB]; |
| 871 | if (factorsCHull->min == NULL && factorsCHull->max == NULL) |
| 872 | { |
| 873 | factorsCHull->type= FALLBACK; |
| 874 | calculateFactorsFallback(analysisData->hullArray[traceNumB][traceNumA], |
| 875 | analysisData->hullArray[traceNumA][traceNumB], |
| 876 | &allFactors[traceNumA][traceNumB]); |
| 877 | } |
| 878 | else if (factorsCHull->min != NULL && factorsCHull->max != NULL) |
| 879 | { |
| 880 | if (factorsCHull->min->drift != -INFINITY && |
| 881 | factorsCHull->max->drift != INFINITY) |
| 882 | { |
| 883 | factorsCHull->type= MIDDLE; |
| 884 | calculateFactorsMiddle(factorsCHull); |
| 885 | } |
| 886 | else if (factorsCHull->min->drift != -INFINITY || |
| 887 | factorsCHull->max->drift != INFINITY) |
| 888 | { |
| 889 | factorsCHull->type= INCOMPLETE; |
| 890 | } |
| 891 | else |
| 892 | { |
| 893 | factorsCHull->type= ABSENT; |
| 894 | } |
| 895 | } |
| 896 | else |
| 897 | { |
| 898 | //g_assert_not_reached(); |
| 899 | factorsCHull->type= SCREWED; |
| 900 | } |
| 901 | } |
| 902 | } |
| 903 | |
| 904 | return allFactors; |
| 905 | } |
| 906 | |
| 907 | |
| 908 | /* Calculate approximative factors based on minimum and maximum limits. The |
| 909 | * best approximation to make is the interior bissector of the angle formed by |
| 910 | * the minimum and maximum lines. |
| 911 | * |
| 912 | * The formulae used come from [Haddad, Yoram: Performance dans les systèmes |
| 913 | * répartis: des outils pour les mesures, Université de Paris-Sud, Centre |
| 914 | * d'Orsay, September 1988] Section 6.1 p.44 |
| 915 | * |
| 916 | * The reasoning for choosing this estimator comes from [Duda, A., Harrus, G., |
| 917 | * Haddad, Y., and Bernard, G.: Estimating global time in distributed systems, |
| 918 | * Proc. 7th Int. Conf. on Distributed Computing Systems, Berlin, volume 18, |
| 919 | * 1987] p.303 |
| 920 | * |
| 921 | * Args: |
| 922 | * factors: contains the min and max limits, used to store the result |
| 923 | */ |
| 924 | void calculateFactorsMiddle(FactorsCHull* const factors) |
| 925 | { |
| 926 | double amin, amax, bmin, bmax, bhat; |
| 927 | |
| 928 | amin= factors->max->offset; |
| 929 | amax= factors->min->offset; |
| 930 | bmin= factors->min->drift; |
| 931 | bmax= factors->max->drift; |
| 932 | |
| 933 | g_assert_cmpfloat(bmax, >=, bmin); |
| 934 | |
| 935 | factors->approx= malloc(sizeof(Factors)); |
| 936 | bhat= (bmax * bmin - 1. + sqrt(1. + pow(bmax, 2.) * pow(bmin, 2.) + |
| 937 | pow(bmax, 2.) + pow(bmin, 2.))) / (bmax + bmin); |
| 938 | factors->approx->offset= amax - (amax - amin) / 2. * (pow(bhat, 2.) + 1.) |
| 939 | / (1. + bhat * bmax); |
| 940 | factors->approx->drift= bhat; |
| 941 | factors->accuracy= bmax - bmin; |
| 942 | } |
| 943 | |
| 944 | |
| 945 | /* |
| 946 | * Analyze the convex hulls to determine the minimum or maximum |
| 947 | * synchronization factors between one pair of trace. |
| 948 | * |
| 949 | * This implements and improves upon the algorithm in [Haddad, Yoram: |
| 950 | * Performance dans les systèmes répartis: des outils pour les mesures, |
| 951 | * Université de Paris-Sud, Centre d'Orsay, September 1988] Section 6.2 p.47 |
| 952 | * |
| 953 | * Some degenerate cases are possible: |
| 954 | * 1) the result is unbounded. In that case, when searching for the maximum |
| 955 | * factors, result->drift= INFINITY; result->offset= -INFINITY. When |
| 956 | * searching for the minimum factors, it is the opposite. It is not |
| 957 | * possible to improve the situation with this data. |
| 958 | * 2) no line can be above the upper hull and below the lower hull. This is |
| 959 | * because the hulls intersect each other or are reversed. This means that |
| 960 | * an assertion was false. Most probably, the clocks are not linear. It is |
| 961 | * possible to repeat the search with another algorithm that will find a |
| 962 | * "best effort" approximation. See calculateFactorsApprox(). |
| 963 | * |
| 964 | * Args: |
| 965 | * cu: the upper half-convex hull, the line must pass above this |
| 966 | * and touch it in one point |
| 967 | * cl: the lower half-convex hull, the line must pass below this |
| 968 | * and touch it in one point |
| 969 | * lineType: search for minimum or maximum factors |
| 970 | * |
| 971 | * Returns: |
| 972 | * If a result is found, a struct Factors is allocated, filed with the |
| 973 | * result and returned |
| 974 | * NULL otherwise, degenerate case 2 is in effect |
| 975 | */ |
| 976 | static Factors* calculateFactorsExact(GQueue* const cu, GQueue* const cl, const |
| 977 | LineType lineType) |
| 978 | { |
| 979 | GQueue* c1, * c2; |
| 980 | unsigned int i1, i2; |
| 981 | Point* p1, * p2; |
| 982 | double inversionFactor; |
| 983 | Factors* result; |
| 984 | |
| 985 | g_debug("calculateFactorsExact(cu= %p, cl= %p, %s)", cu, cl, lineType == |
| 986 | MINIMUM ? "MINIMUM" : "MAXIMUM"); |
| 987 | |
| 988 | if (lineType == MINIMUM) |
| 989 | { |
| 990 | c1= cl; |
| 991 | c2= cu; |
| 992 | inversionFactor= -1.; |
| 993 | } |
| 994 | else |
| 995 | { |
| 996 | c1= cu; |
| 997 | c2= cl; |
| 998 | inversionFactor= 1.; |
| 999 | } |
| 1000 | |
| 1001 | i1= 0; |
| 1002 | i2= c2->length - 1; |
| 1003 | |
| 1004 | // Check for degenerate case 1 |
| 1005 | if (c1->length == 0 || c2->length == 0 || ((Point*) g_queue_peek_nth(c1, |
| 1006 | i1))->x >= ((Point*) g_queue_peek_nth(c2, i2))->x) |
| 1007 | { |
| 1008 | result= malloc(sizeof(Factors)); |
| 1009 | if (lineType == MINIMUM) |
| 1010 | { |
| 1011 | result->drift= -INFINITY; |
| 1012 | result->offset= INFINITY; |
| 1013 | } |
| 1014 | else |
| 1015 | { |
| 1016 | result->drift= INFINITY; |
| 1017 | result->offset= -INFINITY; |
| 1018 | } |
| 1019 | |
| 1020 | return result; |
| 1021 | } |
| 1022 | |
| 1023 | do |
| 1024 | { |
| 1025 | while |
| 1026 | ( |
| 1027 | (int) i2 - 1 > 0 |
| 1028 | && crossProductK( |
| 1029 | g_queue_peek_nth(c1, i1), |
| 1030 | g_queue_peek_nth(c2, i2), |
| 1031 | g_queue_peek_nth(c1, i1), |
| 1032 | g_queue_peek_nth(c2, i2 - 1)) * inversionFactor < 0. |
| 1033 | ) |
| 1034 | { |
| 1035 | if (((Point*) g_queue_peek_nth(c1, i1))->x |
| 1036 | < ((Point*) g_queue_peek_nth(c2, i2 - 1))->x) |
| 1037 | { |
| 1038 | i2--; |
| 1039 | } |
| 1040 | else |
| 1041 | { |
| 1042 | // Degenerate case 2 |
| 1043 | return NULL; |
| 1044 | } |
| 1045 | } |
| 1046 | while |
| 1047 | ( |
| 1048 | i1 + 1 < c1->length - 1 |
| 1049 | && crossProductK( |
| 1050 | g_queue_peek_nth(c1, i1), |
| 1051 | g_queue_peek_nth(c2, i2), |
| 1052 | g_queue_peek_nth(c1, i1 + 1), |
| 1053 | g_queue_peek_nth(c2, i2)) * inversionFactor < 0. |
| 1054 | ) |
| 1055 | { |
| 1056 | if (((Point*) g_queue_peek_nth(c1, i1 + 1))->x |
| 1057 | < ((Point*) g_queue_peek_nth(c2, i2))->x) |
| 1058 | { |
| 1059 | i1++; |
| 1060 | } |
| 1061 | else |
| 1062 | { |
| 1063 | // Degenerate case 2 |
| 1064 | return NULL; |
| 1065 | } |
| 1066 | } |
| 1067 | } while |
| 1068 | ( |
| 1069 | (int) i2 - 1 > 0 |
| 1070 | && crossProductK( |
| 1071 | g_queue_peek_nth(c1, i1), |
| 1072 | g_queue_peek_nth(c2, i2), |
| 1073 | g_queue_peek_nth(c1, i1), |
| 1074 | g_queue_peek_nth(c2, i2 - 1)) * inversionFactor < 0. |
| 1075 | ); |
| 1076 | |
| 1077 | p1= g_queue_peek_nth(c1, i1); |
| 1078 | p2= g_queue_peek_nth(c2, i2); |
| 1079 | |
| 1080 | g_debug("Resulting points are: c1[i1]: x= %" PRIu64 " y= %" PRIu64 |
| 1081 | " c2[i2]: x= %" PRIu64 " y= %" PRIu64 "", p1->x, p1->y, p2->x, p2->y); |
| 1082 | |
| 1083 | result= malloc(sizeof(Factors)); |
| 1084 | result->drift= slope(p1, p2); |
| 1085 | result->offset= intercept(p1, p2); |
| 1086 | |
| 1087 | g_debug("Resulting factors are: drift= %g offset= %g", result->drift, |
| 1088 | result->offset); |
| 1089 | |
| 1090 | return result; |
| 1091 | } |
| 1092 | |
| 1093 | |
| 1094 | /* |
| 1095 | * Analyze the convex hulls to determine approximate synchronization factors |
| 1096 | * between one pair of trace when there is no line that can fit in the |
| 1097 | * corridor separating them. |
| 1098 | * |
| 1099 | * This implements the algorithm in [Ashton, P.: Algorithms for Off-line Clock |
| 1100 | * Synchronisation, University of Canterbury, December 1995, 26] Section 4.2.2 |
| 1101 | * p.7 |
| 1102 | * |
| 1103 | * For each point p1 in cr |
| 1104 | * For each point p2 in cs |
| 1105 | * errorMin= 0 |
| 1106 | * Calculate the line paramaters |
| 1107 | * For each point p3 in each convex hull |
| 1108 | * If p3 is on the wrong side of the line |
| 1109 | * error+= distance |
| 1110 | * If error < errorMin |
| 1111 | * Update results |
| 1112 | * |
| 1113 | * Args: |
| 1114 | * cr: the upper half-convex hull |
| 1115 | * cs: the lower half-convex hull |
| 1116 | * result: a pointer to the pre-allocated struct where the results |
| 1117 | * will be stored |
| 1118 | */ |
| 1119 | static void calculateFactorsFallback(GQueue* const cr, GQueue* const cs, |
| 1120 | FactorsCHull* const result) |
| 1121 | { |
| 1122 | unsigned int i, j, k; |
| 1123 | double errorMin; |
| 1124 | Factors* approx; |
| 1125 | |
| 1126 | errorMin= INFINITY; |
| 1127 | approx= malloc(sizeof(Factors)); |
| 1128 | |
| 1129 | for (i= 0; i < cs->length; i++) |
| 1130 | { |
| 1131 | for (j= 0; j < cr->length; j++) |
| 1132 | { |
| 1133 | double error; |
| 1134 | Point p1, p2; |
| 1135 | |
| 1136 | error= 0.; |
| 1137 | |
| 1138 | if (((Point*) g_queue_peek_nth(cs, i))->x < ((Point*)g_queue_peek_nth(cr, j))->x) |
| 1139 | { |
| 1140 | p1= *(Point*)g_queue_peek_nth(cs, i); |
| 1141 | p2= *(Point*)g_queue_peek_nth(cr, j); |
| 1142 | } |
| 1143 | else |
| 1144 | { |
| 1145 | p1= *(Point*)g_queue_peek_nth(cr, j); |
| 1146 | p2= *(Point*)g_queue_peek_nth(cs, i); |
| 1147 | } |
| 1148 | |
| 1149 | // The lower hull should be above the point |
| 1150 | for (k= 0; k < cs->length; k++) |
| 1151 | { |
| 1152 | if (jointCmp(&p1, &p2, g_queue_peek_nth(cs, k)) < 0.) |
| 1153 | { |
| 1154 | error+= verticalDistance(&p1, &p2, g_queue_peek_nth(cs, k)); |
| 1155 | } |
| 1156 | } |
| 1157 | |
| 1158 | // The upper hull should be below the point |
| 1159 | for (k= 0; k < cr->length; k++) |
| 1160 | { |
| 1161 | if (jointCmp(&p1, &p2, g_queue_peek_nth(cr, k)) > 0.) |
| 1162 | { |
| 1163 | error+= verticalDistance(&p1, &p2, g_queue_peek_nth(cr, k)); |
| 1164 | } |
| 1165 | } |
| 1166 | |
| 1167 | if (error < errorMin) |
| 1168 | { |
| 1169 | g_debug("Fallback: i= %u j= %u is a better match (error= %g)", i, j, error); |
| 1170 | approx->drift= slope(&p1, &p2); |
| 1171 | approx->offset= intercept(&p1, &p2); |
| 1172 | errorMin= error; |
| 1173 | } |
| 1174 | } |
| 1175 | } |
| 1176 | |
| 1177 | result->approx= approx; |
| 1178 | result->accuracy= errorMin; |
| 1179 | } |
| 1180 | |
| 1181 | |
| 1182 | /* |
| 1183 | * Calculate the vertical distance between a line and a point |
| 1184 | * |
| 1185 | * Args: |
| 1186 | * p1, p2: Two points defining the line |
| 1187 | * point: a point |
| 1188 | * |
| 1189 | * Return: |
| 1190 | * the vertical distance |
| 1191 | */ |
| 1192 | static double verticalDistance(Point* p1, Point* p2, Point* const point) |
| 1193 | { |
| 1194 | return fabs(slope(p1, p2) * point->x + intercept(p1, p2) - point->y); |
| 1195 | } |
| 1196 | |
| 1197 | |
| 1198 | /* |
| 1199 | * Calculate the slope between two points |
| 1200 | * |
| 1201 | * Args: |
| 1202 | * p1, p2 the two points |
| 1203 | * |
| 1204 | * Returns: |
| 1205 | * the slope |
| 1206 | */ |
| 1207 | static double slope(const Point* const p1, const Point* const p2) |
| 1208 | { |
| 1209 | return ((double) p2->y - p1->y) / (p2->x - p1->x); |
| 1210 | } |
| 1211 | |
| 1212 | |
| 1213 | /* Calculate the y-intercept of a line that passes by two points |
| 1214 | * |
| 1215 | * Args: |
| 1216 | * p1, p2 the two points |
| 1217 | * |
| 1218 | * Returns: |
| 1219 | * the y-intercept |
| 1220 | */ |
| 1221 | static double intercept(const Point* const p1, const Point* const p2) |
| 1222 | { |
| 1223 | return ((double) p2->y * p1->x - (double) p1->y * p2->x) / ((double) p1->x - p2->x); |
| 1224 | } |
| 1225 | |
| 1226 | |
| 1227 | /* |
| 1228 | * Calculate a resulting offset and drift for each trace. |
| 1229 | * |
| 1230 | * Traces are assembled in groups. A group is an "island" of nodes/traces that |
| 1231 | * exchanged messages. A reference is determined for each group by using a |
| 1232 | * shortest path search based on the accuracy of the approximation. This also |
| 1233 | * forms a tree of the best way to relate each node's clock to the reference's |
| 1234 | * based on the accuracy. Sometimes it may be necessary or advantageous to |
| 1235 | * propagate the factors through intermediary clocks. Resulting factors for |
| 1236 | * each trace are determined based on this tree. |
| 1237 | * |
| 1238 | * This part was not the focus of my research. The algorithm used here is |
| 1239 | * inexact in some ways: |
| 1240 | * 1) The reference used may not actually be the best one to use. This is |
| 1241 | * because the accuracy is not corrected based on the drift during the |
| 1242 | * shortest path search. |
| 1243 | * 2) The min and max factors are not propagated and are no longer valid. |
| 1244 | * 3) Approximations of different types (MIDDLE and FALLBACK) are compared |
| 1245 | * together. The "accuracy" parameters of these have different meanings and |
| 1246 | * are not readily comparable. |
| 1247 | * |
| 1248 | * Nevertheless, the result is satisfactory. You just can't tell "how much" it |
| 1249 | * is. |
| 1250 | * |
| 1251 | * Two alternative (and subtly different) ways of propagating factors to |
| 1252 | * preserve min and max boundaries have been proposed, see: |
| 1253 | * [Duda, A., Harrus, G., Haddad, Y., and Bernard, G.: Estimating global time |
| 1254 | * in distributed systems, Proc. 7th Int. Conf. on Distributed Computing |
| 1255 | * Systems, Berlin, volume 18, 1987] p.304 |
| 1256 | * |
| 1257 | * [Jezequel, J.M., and Jard, C.: Building a global clock for observing |
| 1258 | * computations in distributed memory parallel computers, Concurrency: |
| 1259 | * Practice and Experience 8(1), volume 8, John Wiley & Sons, Ltd Chichester, |
| 1260 | * 1996, 32] Section 5; which is mostly the same as |
| 1261 | * [Jezequel, J.M.: Building a global time on parallel machines, Proceedings |
| 1262 | * of the 3rd International Workshop on Distributed Algorithms, LNCS, volume |
| 1263 | * 392, 136–147, 1989] Section 5 |
| 1264 | * |
| 1265 | * Args: |
| 1266 | * syncState: container for synchronization data. |
| 1267 | * allFactors: offset and drift between each pair of traces |
| 1268 | * |
| 1269 | * Returns: |
| 1270 | * Factors[traceNb] synchronization factors for each trace |
| 1271 | */ |
| 1272 | static GArray* reduceFactors(SyncState* const syncState, FactorsCHull** const |
| 1273 | allFactors) |
| 1274 | { |
| 1275 | GArray* factors; |
| 1276 | double** distances; |
| 1277 | unsigned int** predecessors; |
| 1278 | double* distanceSums; |
| 1279 | unsigned int* references; |
| 1280 | unsigned int i, j; |
| 1281 | |
| 1282 | // Solve the all-pairs shortest path problem using the Floyd-Warshall |
| 1283 | // algorithm |
| 1284 | floydWarshall(syncState, allFactors, &distances, &predecessors); |
| 1285 | |
| 1286 | /* Find the reference for each node |
| 1287 | * |
| 1288 | * First calculate, for each node, the sum of the distances to each other |
| 1289 | * node it can reach. |
| 1290 | * |
| 1291 | * Then, go through each "island" of traces to find the trace that has the |
| 1292 | * lowest distance sum. Assign this trace as the reference to each trace |
| 1293 | * of the island. |
| 1294 | */ |
| 1295 | distanceSums= malloc(syncState->traceNb * sizeof(double)); |
| 1296 | for (i= 0; i < syncState->traceNb; i++) |
| 1297 | { |
| 1298 | distanceSums[i]= 0.; |
| 1299 | for (j= 0; j < syncState->traceNb; j++) |
| 1300 | { |
| 1301 | distanceSums[i]+= distances[i][j]; |
| 1302 | } |
| 1303 | } |
| 1304 | |
| 1305 | references= malloc(syncState->traceNb * sizeof(unsigned int)); |
| 1306 | for (i= 0; i < syncState->traceNb; i++) |
| 1307 | { |
| 1308 | references[i]= UINT_MAX; |
| 1309 | } |
| 1310 | for (i= 0; i < syncState->traceNb; i++) |
| 1311 | { |
| 1312 | if (references[i] == UINT_MAX) |
| 1313 | { |
| 1314 | unsigned int reference; |
| 1315 | double distanceSumMin; |
| 1316 | |
| 1317 | // A node is its own reference by default |
| 1318 | reference= i; |
| 1319 | distanceSumMin= INFINITY; |
| 1320 | for (j= 0; j < syncState->traceNb; j++) |
| 1321 | { |
| 1322 | if (distances[i][j] != INFINITY && distanceSums[j] < |
| 1323 | distanceSumMin) |
| 1324 | { |
| 1325 | reference= j; |
| 1326 | distanceSumMin= distanceSums[j]; |
| 1327 | } |
| 1328 | } |
| 1329 | for (j= 0; j < syncState->traceNb; j++) |
| 1330 | { |
| 1331 | if (distances[i][j] != INFINITY) |
| 1332 | { |
| 1333 | references[j]= reference; |
| 1334 | } |
| 1335 | } |
| 1336 | } |
| 1337 | } |
| 1338 | |
| 1339 | for (i= 0; i < syncState->traceNb; i++) |
| 1340 | { |
| 1341 | free(distances[i]); |
| 1342 | } |
| 1343 | free(distances); |
| 1344 | free(distanceSums); |
| 1345 | |
| 1346 | /* For each trace, calculate the factors based on their corresponding |
| 1347 | * tree. The tree is rooted at the reference and the shortest path to each |
| 1348 | * other nodes are the branches. |
| 1349 | */ |
| 1350 | factors= g_array_sized_new(FALSE, FALSE, sizeof(Factors), |
| 1351 | syncState->traceNb); |
| 1352 | g_array_set_size(factors, syncState->traceNb); |
| 1353 | for (i= 0; i < syncState->traceNb; i++) |
| 1354 | { |
| 1355 | getFactors(allFactors, predecessors, references, i, &g_array_index(factors, |
| 1356 | Factors, i)); |
| 1357 | } |
| 1358 | |
| 1359 | for (i= 0; i < syncState->traceNb; i++) |
| 1360 | { |
| 1361 | free(predecessors[i]); |
| 1362 | } |
| 1363 | free(predecessors); |
| 1364 | free(references); |
| 1365 | |
| 1366 | return factors; |
| 1367 | } |
| 1368 | |
| 1369 | |
| 1370 | /* |
| 1371 | * Perform an all-source shortest path search using the Floyd-Warshall |
| 1372 | * algorithm. |
| 1373 | * |
| 1374 | * The algorithm is implemented accoding to the description here: |
| 1375 | * http://web.mit.edu/urban_or_book/www/book/chapter6/6.2.2.html |
| 1376 | * |
| 1377 | * Args: |
| 1378 | * syncState: container for synchronization data. |
| 1379 | * allFactors: offset and drift between each pair of traces |
| 1380 | * distances: resulting matrix of the length of the shortest path between |
| 1381 | * two nodes. If there is no path between two nodes, the |
| 1382 | * length is INFINITY |
| 1383 | * predecessors: resulting matrix of each node's predecessor on the shortest |
| 1384 | * path between two nodes |
| 1385 | */ |
| 1386 | static void floydWarshall(SyncState* const syncState, FactorsCHull** const |
| 1387 | allFactors, double*** const distances, unsigned int*** const |
| 1388 | predecessors) |
| 1389 | { |
| 1390 | unsigned int i, j, k; |
| 1391 | |
| 1392 | // Setup initial conditions |
| 1393 | *distances= malloc(syncState->traceNb * sizeof(double*)); |
| 1394 | *predecessors= malloc(syncState->traceNb * sizeof(unsigned int*)); |
| 1395 | for (i= 0; i < syncState->traceNb; i++) |
| 1396 | { |
| 1397 | (*distances)[i]= malloc(syncState->traceNb * sizeof(double)); |
| 1398 | for (j= 0; j < syncState->traceNb; j++) |
| 1399 | { |
| 1400 | if (i == j) |
| 1401 | { |
| 1402 | g_assert(allFactors[i][j].type == EXACT); |
| 1403 | |
| 1404 | (*distances)[i][j]= 0.; |
| 1405 | } |
| 1406 | else |
| 1407 | { |
| 1408 | unsigned int row, col; |
| 1409 | |
| 1410 | if (i > j) |
| 1411 | { |
| 1412 | row= i; |
| 1413 | col= j; |
| 1414 | } |
| 1415 | else if (i < j) |
| 1416 | { |
| 1417 | row= j; |
| 1418 | col= i; |
| 1419 | } |
| 1420 | |
| 1421 | if (allFactors[row][col].type == MIDDLE || |
| 1422 | allFactors[row][col].type == FALLBACK) |
| 1423 | { |
| 1424 | (*distances)[i][j]= allFactors[row][col].accuracy; |
| 1425 | } |
| 1426 | else if (allFactors[row][col].type == INCOMPLETE || |
| 1427 | allFactors[row][col].type == SCREWED || |
| 1428 | allFactors[row][col].type == ABSENT) |
| 1429 | { |
| 1430 | (*distances)[i][j]= INFINITY; |
| 1431 | } |
| 1432 | else |
| 1433 | { |
| 1434 | g_assert_not_reached(); |
| 1435 | } |
| 1436 | } |
| 1437 | } |
| 1438 | |
| 1439 | (*predecessors)[i]= malloc(syncState->traceNb * sizeof(unsigned int)); |
| 1440 | for (j= 0; j < syncState->traceNb; j++) |
| 1441 | { |
| 1442 | if (i != j) |
| 1443 | { |
| 1444 | (*predecessors)[i][j]= i; |
| 1445 | } |
| 1446 | else |
| 1447 | { |
| 1448 | (*predecessors)[i][j]= UINT_MAX; |
| 1449 | } |
| 1450 | } |
| 1451 | } |
| 1452 | |
| 1453 | // Run the iterations |
| 1454 | for (k= 0; k < syncState->traceNb; k++) |
| 1455 | { |
| 1456 | for (i= 0; i < syncState->traceNb; i++) |
| 1457 | { |
| 1458 | for (j= 0; j < syncState->traceNb; j++) |
| 1459 | { |
| 1460 | double distanceMin; |
| 1461 | |
| 1462 | distanceMin= MIN((*distances)[i][j], (*distances)[i][k] + |
| 1463 | (*distances)[k][j]); |
| 1464 | |
| 1465 | if (distanceMin != (*distances)[i][j]) |
| 1466 | { |
| 1467 | (*predecessors)[i][j]= (*predecessors)[k][j]; |
| 1468 | } |
| 1469 | |
| 1470 | (*distances)[i][j]= distanceMin; |
| 1471 | } |
| 1472 | } |
| 1473 | } |
| 1474 | } |
| 1475 | |
| 1476 | |
| 1477 | /* |
| 1478 | * Cummulate the time correction factors to convert a node's time to its |
| 1479 | * reference's time. |
| 1480 | * This function recursively calls itself until it reaches the reference node. |
| 1481 | * |
| 1482 | * Args: |
| 1483 | * allFactors: offset and drift between each pair of traces |
| 1484 | * predecessors: matrix of each node's predecessor on the shortest |
| 1485 | * path between two nodes |
| 1486 | * references: reference node for each node |
| 1487 | * traceNum: node for which to find the factors |
| 1488 | * factors: resulting factors |
| 1489 | */ |
| 1490 | static void getFactors(FactorsCHull** const allFactors, unsigned int** const |
| 1491 | predecessors, unsigned int* const references, const unsigned int traceNum, |
| 1492 | Factors* const factors) |
| 1493 | { |
| 1494 | unsigned int reference; |
| 1495 | |
| 1496 | reference= references[traceNum]; |
| 1497 | |
| 1498 | if (reference == traceNum) |
| 1499 | { |
| 1500 | factors->offset= 0.; |
| 1501 | factors->drift= 1.; |
| 1502 | } |
| 1503 | else |
| 1504 | { |
| 1505 | Factors previousVertexFactors; |
| 1506 | |
| 1507 | getFactors(allFactors, predecessors, references, |
| 1508 | predecessors[reference][traceNum], &previousVertexFactors); |
| 1509 | |
| 1510 | // convertir de traceNum à reference |
| 1511 | |
| 1512 | // allFactors convertit de col à row |
| 1513 | |
| 1514 | if (reference > traceNum) |
| 1515 | { |
| 1516 | factors->offset= previousVertexFactors.drift * |
| 1517 | allFactors[reference][traceNum].approx->offset + |
| 1518 | previousVertexFactors.offset; |
| 1519 | factors->drift= previousVertexFactors.drift * |
| 1520 | allFactors[reference][traceNum].approx->drift; |
| 1521 | } |
| 1522 | else |
| 1523 | { |
| 1524 | factors->offset= previousVertexFactors.drift * (-1. * |
| 1525 | allFactors[traceNum][reference].approx->offset / |
| 1526 | allFactors[traceNum][reference].approx->drift) + |
| 1527 | previousVertexFactors.offset; |
| 1528 | factors->drift= previousVertexFactors.drift * (1. / |
| 1529 | allFactors[traceNum][reference].approx->drift); |
| 1530 | } |
| 1531 | } |
| 1532 | } |
| 1533 | |
| 1534 | |
| 1535 | /* |
| 1536 | * Write the analysis-specific graph lines in the gnuplot script. |
| 1537 | * |
| 1538 | * Args: |
| 1539 | * syncState: container for synchronization data |
| 1540 | * i: first trace number |
| 1541 | * j: second trace number, garanteed to be larger than i |
| 1542 | */ |
| 1543 | void writeAnalysisGraphsPlotsCHull(SyncState* const syncState, const unsigned |
| 1544 | int i, const unsigned int j) |
| 1545 | { |
| 1546 | AnalysisDataCHull* analysisData; |
| 1547 | FactorsCHull* factorsCHull; |
| 1548 | |
| 1549 | analysisData= (AnalysisDataCHull*) syncState->analysisData; |
| 1550 | |
| 1551 | fprintf(syncState->graphsStream, |
| 1552 | "\t\"analysis_chull-%1$03d_to_%2$03d.data\" " |
| 1553 | "title \"Lower half-hull\" with linespoints " |
| 1554 | "linecolor rgb \"#015a01\" linetype 4 pointtype 8 pointsize 0.8, \\\n" |
| 1555 | "\t\"analysis_chull-%2$03d_to_%1$03d.data\" " |
| 1556 | "title \"Upper half-hull\" with linespoints " |
| 1557 | "linecolor rgb \"#003366\" linetype 4 pointtype 10 pointsize 0.8, \\\n", |
| 1558 | i, j); |
| 1559 | |
| 1560 | factorsCHull= &analysisData->graphsData->allFactors[j][i]; |
| 1561 | if (factorsCHull->type == EXACT) |
| 1562 | { |
| 1563 | fprintf(syncState->graphsStream, |
| 1564 | "\t%7g + %7g * x " |
| 1565 | "title \"Exact conversion\" with lines " |
| 1566 | "linecolor rgb \"black\" linetype 1, \\\n", |
| 1567 | factorsCHull->approx->offset, factorsCHull->approx->drift); |
| 1568 | } |
| 1569 | else if (factorsCHull->type == MIDDLE) |
| 1570 | { |
| 1571 | fprintf(syncState->graphsStream, |
| 1572 | "\t%.2f + %.10f * x " |
| 1573 | "title \"Min conversion\" with lines " |
| 1574 | "linecolor rgb \"black\" linetype 5, \\\n", |
| 1575 | factorsCHull->min->offset, factorsCHull->min->drift); |
| 1576 | fprintf(syncState->graphsStream, |
| 1577 | "\t%.2f + %.10f * x " |
| 1578 | "title \"Max conversion\" with lines " |
| 1579 | "linecolor rgb \"black\" linetype 8, \\\n", |
| 1580 | factorsCHull->max->offset, factorsCHull->max->drift); |
| 1581 | fprintf(syncState->graphsStream, |
| 1582 | "\t%.2f + %.10f * x " |
| 1583 | "title \"Middle conversion\" with lines " |
| 1584 | "linecolor rgb \"black\" linetype 1, \\\n", |
| 1585 | factorsCHull->approx->offset, factorsCHull->approx->drift); |
| 1586 | } |
| 1587 | else if (factorsCHull->type == FALLBACK) |
| 1588 | { |
| 1589 | fprintf(syncState->graphsStream, |
| 1590 | "\t%.2f + %.10f * x " |
| 1591 | "title \"Fallback conversion\" with lines " |
| 1592 | "linecolor rgb \"gray60\" linetype 1, \\\n", |
| 1593 | factorsCHull->approx->offset, factorsCHull->approx->drift); |
| 1594 | } |
| 1595 | else if (factorsCHull->type == INCOMPLETE) |
| 1596 | { |
| 1597 | if (factorsCHull->min->drift != -INFINITY) |
| 1598 | { |
| 1599 | fprintf(syncState->graphsStream, |
| 1600 | "\t%.2f + %.10f * x " |
| 1601 | "title \"Min conversion\" with lines " |
| 1602 | "linecolor rgb \"black\" linetype 5, \\\n", |
| 1603 | factorsCHull->min->offset, factorsCHull->min->drift); |
| 1604 | } |
| 1605 | |
| 1606 | if (factorsCHull->max->drift != INFINITY) |
| 1607 | { |
| 1608 | fprintf(syncState->graphsStream, |
| 1609 | "\t%.2f + %.10f * x " |
| 1610 | "title \"Max conversion\" with lines " |
| 1611 | "linecolor rgb \"black\" linetype 8, \\\n", |
| 1612 | factorsCHull->max->offset, factorsCHull->max->drift); |
| 1613 | } |
| 1614 | } |
| 1615 | else if (factorsCHull->type == SCREWED) |
| 1616 | { |
| 1617 | if (factorsCHull->min != NULL && factorsCHull->min->drift != -INFINITY) |
| 1618 | { |
| 1619 | fprintf(syncState->graphsStream, |
| 1620 | "\t%.2f + %.10f * x " |
| 1621 | "title \"Min conversion\" with lines " |
| 1622 | "linecolor rgb \"black\" linetype 5, \\\n", |
| 1623 | factorsCHull->min->offset, factorsCHull->min->drift); |
| 1624 | } |
| 1625 | |
| 1626 | if (factorsCHull->max != NULL && factorsCHull->max->drift != INFINITY) |
| 1627 | { |
| 1628 | fprintf(syncState->graphsStream, |
| 1629 | "\t%.2f + %.10f * x " |
| 1630 | "title \"Max conversion\" with lines " |
| 1631 | "linecolor rgb \"black\" linetype 8, \\\n", |
| 1632 | factorsCHull->max->offset, factorsCHull->max->drift); |
| 1633 | } |
| 1634 | } |
| 1635 | else if (factorsCHull->type == ABSENT) |
| 1636 | { |
| 1637 | } |
| 1638 | else |
| 1639 | { |
| 1640 | g_assert_not_reached(); |
| 1641 | } |
| 1642 | } |