[lttv.git] / trunk / lttv / doc / developer / time-monotonic-accurate.txt


Monotonic accurate time

The goal of this design is to provide a monotonic time :

Readable from userspace without a system call
Readable from NMI handler
Readable without disabling interrupts
Readable without disabling preemption
Only one clock source (most precise available : tsc)
Support architectures with variable TSC frequency.

Main difference with wall time currently implemented in the Linux kernel : the
time update is done atomically instead of using a write seqlock. It permits
reading time from NMI handler and from userspace.

struct time_info {
	u64 tsc;
	u64 freq;
	u64 walltime;
}

static struct time_struct {
	struct time_info time_sel[2];
	long update_count;
}

DECLARE_PERCPU(struct time_struct, cpu_time);

/* Number of times the scheduler is called on each CPU */
DECLARE_PERCPU(unsigned long, sched_nr);

/* On frequency change event */
/* In irq context */
void freq_change_cb(unsigned int new_freq)
{
	struct time_struct this_cpu_time = 
		per_cpu(cpu_time, smp_processor_id());
	struct time_info *write_time, *current_time;
	write_time =
		this_cpu_time->time_sel[(this_cpu_time->update_count+1)&1];
	current_time =
		this_cpu_time->time_sel[(this_cpu_time->update_count)&1];
	write_time->tsc = get_cycles();
	write_time->freq = new_freq;
	/* We cumulate the division imprecision. This is the downside of using
	 * the TSC with variable frequency as a time base. */
	write_time->walltime = 
		current_time->walltime + 
			(write_time->tsc - current_time->tsc) /
			current_time->freq;
	wmb();
	this_cpu_time->update_count++;
}


/* Init cpu freq */
init_cpu_freq()
{
	struct time_struct this_cpu_time = 
		per_cpu(cpu_time, smp_processor_id());
	struct time_info *current_time;
	memset(this_cpu_time, 0, sizeof(this_cpu_time));
	current_time = this_cpu_time->time_sel[this_cpu_time->update_count&1];
	/* Init current time */
	/* Get frequency */
	/* Reset cpus to 0 ns, 0 tsc, start their tsc. */
}


/* After a CPU comes back from hlt */
/* The trick is to sync all the other CPUs on the first CPU up when they come
 * up. If all CPUs are down, then there is no need to increment the walltime :
 * let's simply define the useful walltime on a machine as the time elapsed
 * while there is a CPU running. If we want, when no cpu is active, we can use
 * a lower resolution clock to somehow keep track of walltime. */

wake_from_hlt()
{
	/* TODO */
}


/* Read time from anywhere in the kernel. Return time in walltime. (ns) */
/* If the update_count changes while we read the context, it may be invalid.
 * This would happen if we are scheduled out for a period of time long enough to
 * permit 2 frequency changes. We simply start the loop again if it happens.
 * We detect it by comparing the update_count running counter.
 * We detect preemption by incrementing a counter sched_nr within schedule(). 
 * This counter is readable by user space through the vsyscall page. */
 */
u64 read_time(void)
{
	u64 walltime;
	long update_count;
	struct time_struct this_cpu_time;
	struct time_info *current_time;
	unsigned int cpu;
	long prev_sched_nr;
	do {
		cpu = _smp_processor_id();
		prev_sched_nr = per_cpu(sched_nr, cpu);
		if(cpu != _smp_processor_id())
			continue;	/* changed CPU between CPUID and getting
					   sched_nr */
		this_cpu_time = per_cpu(cpu_time, cpu);
		update_count = this_cpu_time->update_count;
		current_time = this_cpu_time->time_sel[update_count&1];
		walltime = current_time->walltime + 
				(get_cycles() - current_time->tsc) /
				current_time->freq;
		if(per_cpu(sched_nr, cpu) != prev_sched_nr)
			continue;	/* been preempted */
	} while(this_cpu_time->update_count != update_count);
	return walltime;
}

/* Userspace */
/* Export all this data to user space through the vsyscall page. Use a function
 * like read_time to read the walltime. This function can be implemented as-is
 * because it doesn't need to disable preemption. */
Commit	Line	Data
d8ce0927	1
	2	Monotonic accurate time
	3
	4	The goal of this design is to provide a monotonic time :
	5
	6	Readable from userspace without a system call
	7	Readable from NMI handler
	8	Readable without disabling interrupts
	9	Readable without disabling preemption
	10	Only one clock source (most precise available : tsc)
	11	Support architectures with variable TSC frequency.
	12
	13	Main difference with wall time currently implemented in the Linux kernel : the
	14	time update is done atomically instead of using a write seqlock. It permits
	15	reading time from NMI handler and from userspace.
	16
	17	struct time_info {
	18	u64 tsc;
	19	u64 freq;
	20	u64 walltime;
	21	}
	22
	23	static struct time_struct {
	24	struct time_info time_sel[2];
	25	long update_count;
	26	}
	27
	28	DECLARE_PERCPU(struct time_struct, cpu_time);
	29
0f57d12e	30	/* Number of times the scheduler is called on each CPU */
	31	DECLARE_PERCPU(unsigned long, sched_nr);
	32
d8ce0927	33	/* On frequency change event */
	34	/* In irq context */
	35	void freq_change_cb(unsigned int new_freq)
	36	{
	37	struct time_struct this_cpu_time =
	38	per_cpu(cpu_time, smp_processor_id());
	39	struct time_info write_time, current_time;
	40	write_time =
	41	this_cpu_time->time_sel[(this_cpu_time->update_count+1)&1];
	42	current_time =
	43	this_cpu_time->time_sel[(this_cpu_time->update_count)&1];
	44	write_time->tsc = get_cycles();
	45	write_time->freq = new_freq;
	46	/* We cumulate the division imprecision. This is the downside of using
	47	* the TSC with variable frequency as a time base. */
	48	write_time->walltime =
	49	current_time->walltime +
	50	(write_time->tsc - current_time->tsc) /
	51	current_time->freq;
	52	wmb();
	53	this_cpu_time->update_count++;
	54	}
	55
	56
	57	/* Init cpu freq */
	58	init_cpu_freq()
	59	{
	60	struct time_struct this_cpu_time =
	61	per_cpu(cpu_time, smp_processor_id());
	62	struct time_info *current_time;
	63	memset(this_cpu_time, 0, sizeof(this_cpu_time));
	64	current_time = this_cpu_time->time_sel[this_cpu_time->update_count&1];
	65	/* Init current time */
	66	/* Get frequency */
	67	/* Reset cpus to 0 ns, 0 tsc, start their tsc. */
	68	}
	69
	70
	71	/* After a CPU comes back from hlt */
	72	/* The trick is to sync all the other CPUs on the first CPU up when they come
	73	* up. If all CPUs are down, then there is no need to increment the walltime :
	74	* let's simply define the useful walltime on a machine as the time elapsed
	75	* while there is a CPU running. If we want, when no cpu is active, we can use
	76	* a lower resolution clock to somehow keep track of walltime. */
	77
	78	wake_from_hlt()
	79	{
	80	/* TODO */
	81	}
	82
	83
	84
	85	/* Read time from anywhere in the kernel. Return time in walltime. (ns) */
	86	/* If the update_count changes while we read the context, it may be invalid.
	87	* This would happen if we are scheduled out for a period of time long enough to
	88	* permit 2 frequency changes. We simply start the loop again if it happens.
0f57d12e	89	* We detect it by comparing the update_count running counter.
	90	* We detect preemption by incrementing a counter sched_nr within schedule().
	91	* This counter is readable by user space through the vsyscall page. */
b82734ba	92	*/
d8ce0927	93	u64 read_time(void)
	94	{
	95	u64 walltime;
	96	long update_count;
b82734ba	97	struct time_struct this_cpu_time;
d8ce0927	98	struct time_info *current_time;
b82734ba	99	unsigned int cpu;
0f57d12e	100	long prev_sched_nr;
d8ce0927	101	do {
b82734ba	102	cpu = _smp_processor_id();
0f57d12e	103	prev_sched_nr = per_cpu(sched_nr, cpu);
	104	if(cpu != _smp_processor_id())
	105	continue; /* changed CPU between CPUID and getting
	106	sched_nr */
b82734ba	107	this_cpu_time = per_cpu(cpu_time, cpu);
d8ce0927	108	update_count = this_cpu_time->update_count;
	109	current_time = this_cpu_time->time_sel[update_count&1];
	110	walltime = current_time->walltime +
	111	(get_cycles() - current_time->tsc) /
	112	current_time->freq;
0f57d12e	113	if(per_cpu(sched_nr, cpu) != prev_sched_nr)
	114	continue; /* been preempted */
	115	} while(this_cpu_time->update_count != update_count);
d8ce0927	116	return walltime;
	117	}
	118
	119	/* Userspace */
	120	/* Export all this data to user space through the vsyscall page. Use a function
	121	* like read_time to read the walltime. This function can be implemented as-is
	122	* because it doesn't need to disable preemption. */
	123
	124
	125