struct switch_offsets {
unsigned long begin, end, old;
size_t pre_header_padding, size;
- unsigned int switch_new_start:1, switch_new_end:1, switch_old_start:1,
- switch_old_end:1;
+ unsigned int switch_new_start:1, switch_old_start:1, switch_old_end:1;
};
DEFINE_URCU_TLS(unsigned int, lib_ring_buffer_nesting);
* Handle timer teardown race wrt memory free of private data by
* ring buffer signals are handled by a single thread, which permits
* a synchronization point between handling of each signal.
- * Protected by the ust mutex.
+ * Protected by the lock within the structure.
*/
struct timer_signal_data {
pthread_t tid; /* thread id managing signals */
int setup_done;
int qs_done;
+ pthread_mutex_t lock;
};
-static struct timer_signal_data timer_signal;
+static struct timer_signal_data timer_signal = {
+ .tid = 0,
+ .setup_done = 0,
+ .qs_done = 0,
+ .lock = PTHREAD_MUTEX_INITIALIZER,
+};
/**
* lib_ring_buffer_reset - Reset ring buffer to initial values.
}
/*
- * Called with ust_lock() held.
* Ensure only a single thread listens on the timer signal.
*/
static
pthread_t thread;
int ret;
+ pthread_mutex_lock(&timer_signal.lock);
if (timer_signal.setup_done)
- return;
+ goto end;
ret = pthread_create(&thread, NULL, &sig_thread, NULL);
if (ret) {
PERROR("pthread_detach");
}
timer_signal.setup_done = 1;
+end:
+ pthread_mutex_unlock(&timer_signal.lock);
}
/*
- * Called with ust_lock() held.
+ * Wait for signal-handling thread quiescent state.
*/
+static
+void lib_ring_buffer_wait_signal_thread_qs(unsigned int signr)
+{
+ sigset_t pending_set;
+ int ret;
+
+ /*
+ * We need to be the only thread interacting with the thread
+ * that manages signals for teardown synchronization.
+ */
+ pthread_mutex_lock(&timer_signal.lock);
+
+ /*
+ * Ensure we don't have any signal queued for this channel.
+ */
+ for (;;) {
+ ret = sigemptyset(&pending_set);
+ if (ret == -1) {
+ PERROR("sigemptyset");
+ }
+ ret = sigpending(&pending_set);
+ if (ret == -1) {
+ PERROR("sigpending");
+ }
+ if (!sigismember(&pending_set, signr))
+ break;
+ caa_cpu_relax();
+ }
+
+ /*
+ * From this point, no new signal handler will be fired that
+ * would try to access "chan". However, we still need to wait
+ * for any currently executing handler to complete.
+ */
+ cmm_smp_mb();
+ CMM_STORE_SHARED(timer_signal.qs_done, 0);
+ cmm_smp_mb();
+
+ /*
+ * Kill with LTTNG_UST_RB_SIG_TEARDOWN, so signal management
+ * thread wakes up.
+ */
+ kill(getpid(), LTTNG_UST_RB_SIG_TEARDOWN);
+
+ while (!CMM_LOAD_SHARED(timer_signal.qs_done))
+ caa_cpu_relax();
+ cmm_smp_mb();
+
+ pthread_mutex_unlock(&timer_signal.lock);
+}
+
static
void lib_ring_buffer_channel_switch_timer_start(struct channel *chan)
{
}
}
-/*
- * Called with ust_lock() held.
- */
static
void lib_ring_buffer_channel_switch_timer_stop(struct channel *chan)
{
- sigset_t pending_set;
int ret;
if (!chan->switch_timer_interval || !chan->switch_timer_enabled)
PERROR("timer_delete");
}
- /*
- * Ensure we don't have any signal queued for this channel.
- */
- for (;;) {
- ret = sigemptyset(&pending_set);
- if (ret == -1) {
- PERROR("sigemptyset");
- }
- ret = sigpending(&pending_set);
- if (ret == -1) {
- PERROR("sigpending");
- }
- if (!sigismember(&pending_set, LTTNG_UST_RB_SIG_FLUSH))
- break;
- caa_cpu_relax();
- }
-
- /*
- * From this point, no new signal handler will be fired that
- * would try to access "chan". However, we still need to wait
- * for any currently executing handler to complete.
- */
- cmm_smp_mb();
- CMM_STORE_SHARED(timer_signal.qs_done, 0);
- cmm_smp_mb();
-
- /*
- * Kill with LTTNG_UST_RB_SIG_TEARDOWN, so signal management
- * thread wakes up.
- */
- kill(getpid(), LTTNG_UST_RB_SIG_TEARDOWN);
-
- while (!CMM_LOAD_SHARED(timer_signal.qs_done))
- caa_cpu_relax();
- cmm_smp_mb();
+ lib_ring_buffer_wait_signal_thread_qs(LTTNG_UST_RB_SIG_FLUSH);
chan->switch_timer = 0;
chan->switch_timer_enabled = 0;
}
-/*
- * Called with ust_lock() held.
- */
static
void lib_ring_buffer_channel_read_timer_start(struct channel *chan)
{
}
}
-/*
- * Called with ust_lock() held.
- */
static
void lib_ring_buffer_channel_read_timer_stop(struct channel *chan)
{
const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config;
- sigset_t pending_set;
int ret;
if (config->wakeup != RING_BUFFER_WAKEUP_BY_TIMER
*/
lib_ring_buffer_channel_do_read(chan);
-
- /*
- * Ensure we don't have any signal queued for this channel.
- */
- for (;;) {
- ret = sigemptyset(&pending_set);
- if (ret == -1) {
- PERROR("sigemptyset");
- }
- ret = sigpending(&pending_set);
- if (ret == -1) {
- PERROR("sigpending");
- }
- if (!sigismember(&pending_set, LTTNG_UST_RB_SIG_READ))
- break;
- caa_cpu_relax();
- }
-
- /*
- * From this point, no new signal handler will be fired that
- * would try to access "chan". However, we still need to wait
- * for any currently executing handler to complete.
- */
- cmm_smp_mb();
- CMM_STORE_SHARED(timer_signal.qs_done, 0);
- cmm_smp_mb();
-
- /*
- * Kill with LTTNG_UST_RB_SIG_TEARDOWN, so signal management
- * thread wakes up.
- */
- kill(getpid(), LTTNG_UST_RB_SIG_TEARDOWN);
-
- while (!CMM_LOAD_SHARED(timer_signal.qs_done))
- caa_cpu_relax();
- cmm_smp_mb();
+ lib_ring_buffer_wait_signal_thread_qs(LTTNG_UST_RB_SIG_READ);
chan->read_timer = 0;
chan->read_timer_enabled = 0;
}
/**
- * lib_ring_buffer_put_snapshot - move consumed counter forward
+ * lib_ring_buffer_move_consumer - move consumed counter forward
* @buf: ring buffer
* @consumed_new: new consumed count value
*/
handle);
}
-/*
- * lib_ring_buffer_switch_new_end: finish switching current subbuffer
- *
- * The only remaining threads could be the ones with pending commits. They will
- * have to do the deliver themselves.
- */
-static
-void lib_ring_buffer_switch_new_end(struct lttng_ust_lib_ring_buffer *buf,
- struct channel *chan,
- struct switch_offsets *offsets,
- uint64_t tsc,
- struct lttng_ust_shm_handle *handle)
-{
- const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config;
- unsigned long endidx = subbuf_index(offsets->end - 1, chan);
- unsigned long commit_count, padding_size, data_size;
-
- data_size = subbuf_offset(offsets->end - 1, chan) + 1;
- padding_size = chan->backend.subbuf_size - data_size;
- subbuffer_set_data_size(config, &buf->backend, endidx, data_size,
- handle);
-
- /*
- * Order all writes to buffer before the commit count update that will
- * determine that the subbuffer is full.
- */
- cmm_smp_wmb();
- v_add(config, padding_size, &shmp_index(handle, buf->commit_hot, endidx)->cc);
- commit_count = v_read(config, &shmp_index(handle, buf->commit_hot, endidx)->cc);
- lib_ring_buffer_check_deliver(config, buf, chan, offsets->end - 1,
- commit_count, endidx, handle);
- lib_ring_buffer_write_commit_counter(config, buf, chan, endidx,
- offsets->end, commit_count,
- padding_size, handle);
-}
-
/*
* Returns :
* 0 if ok
offsets->begin = v_read(config, &buf->offset);
offsets->old = offsets->begin;
offsets->switch_new_start = 0;
- offsets->switch_new_end = 0;
offsets->switch_old_end = 0;
offsets->pre_header_padding = 0;
*/
}
offsets->end = offsets->begin + offsets->size;
-
- if (caa_unlikely(subbuf_offset(offsets->end, chan) == 0)) {
- /*
- * The offset_end will fall at the very beginning of the next
- * subbuffer.
- */
- offsets->switch_new_end = 1; /* For offsets->begin */
- }
return 0;
}
if (caa_unlikely(offsets.switch_new_start))
lib_ring_buffer_switch_new_start(buf, chan, &offsets, ctx->tsc, handle);
- if (caa_unlikely(offsets.switch_new_end))
- lib_ring_buffer_switch_new_end(buf, chan, &offsets, ctx->tsc, handle);
-
ctx->slot_size = offsets.size;
ctx->pre_offset = offsets.begin;
ctx->buf_offset = offsets.begin + offsets.pre_header_padding;
projects / lttng-ust.git / blobdiff