1 #ifndef _URCU_SIGNAL_STATIC_H
2 #define _URCU_SIGNAL_STATIC_H
7 * Userspace RCU header.
9 * TO BE INCLUDED ONLY IN CODE THAT IS TO BE RECOMPILED ON EACH LIBURCU
10 * RELEASE. See urcu.h for linking dynamically with the userspace rcu library.
12 * Copyright (c) 2009 Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
13 * Copyright (c) 2009 Paul E. McKenney, IBM Corporation.
15 * This library is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU Lesser General Public
17 * License as published by the Free Software Foundation; either
18 * version 2.1 of the License, or (at your option) any later version.
20 * This library is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
23 * Lesser General Public License for more details.
25 * You should have received a copy of the GNU Lesser General Public
26 * License along with this library; if not, write to the Free Software
27 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
29 * IBM's contributions to this file may be relicensed under LGPLv2 or later.
37 #include <urcu/config.h>
38 #include <urcu/compiler.h>
39 #include <urcu/arch.h>
40 #include <urcu/system.h>
41 #include <urcu/uatomic.h>
42 #include <urcu/list.h>
43 #include <urcu/futex.h>
44 #include <urcu/tls-compat.h>
45 #include <urcu/debug.h>
46 #include <urcu/static/urcu-common.h>
53 * This code section can only be included in LGPL 2.1 compatible source code.
54 * See below for the function call wrappers which can be used in code meant to
55 * be only linked with the Userspace RCU library. This comes with a small
56 * performance degradation on the read-side due to the added function calls.
57 * This is required to permit relinking with newer versions of the library.
61 * The signal number used by the RCU library can be overridden with
62 * -DSIGRCU= when compiling the library.
63 * Provide backward compatibility for liburcu 0.3.x SIGURCU.
66 #define SIGRCU SIGURCU
70 #define SIGRCU SIGUSR1
73 extern struct urcu_gp urcu_signal_gp
;
75 extern DECLARE_URCU_TLS(struct urcu_reader
, urcu_signal_reader
);
78 * Helper for _rcu_read_lock(). The format of urcu_signal_gp.ctr (as well as
79 * the per-thread rcu_reader.ctr) has the upper bits containing a count of
80 * _rcu_read_lock() nesting, and a lower-order bit that contains either zero
81 * or URCU_GP_CTR_PHASE. The cmm_barrier() ensures that the accesses in
82 * _rcu_read_lock() happen before the subsequent read-side critical section.
84 static inline void _urcu_signal_read_lock_update(unsigned long tmp
)
86 if (caa_likely(!(tmp
& URCU_GP_CTR_NEST_MASK
))) {
87 _CMM_STORE_SHARED(URCU_TLS(urcu_signal_reader
).ctr
, _CMM_LOAD_SHARED(urcu_signal_gp
.ctr
));
90 _CMM_STORE_SHARED(URCU_TLS(urcu_signal_reader
).ctr
, tmp
+ URCU_GP_COUNT
);
94 * Enter an RCU read-side critical section.
96 * The first cmm_barrier() call ensures that the compiler does not reorder
97 * the body of _rcu_read_lock() with a mutex.
99 * This function and its helper are both less than 10 lines long. The
100 * intent is that this function meets the 10-line criterion in LGPL,
101 * allowing this function to be invoked directly from non-LGPL code.
103 static inline void _urcu_signal_read_lock(void)
107 urcu_assert(URCU_TLS(urcu_signal_reader
).registered
);
109 tmp
= URCU_TLS(urcu_signal_reader
).ctr
;
110 urcu_assert((tmp
& URCU_GP_CTR_NEST_MASK
) != URCU_GP_CTR_NEST_MASK
);
111 _urcu_signal_read_lock_update(tmp
);
115 * This is a helper function for _rcu_read_unlock().
117 * The first cmm_barrier() call ensures that the critical section is
118 * seen to precede the store to rcu_reader.ctr.
119 * The second cmm_barrier() call ensures that we write to rcu_reader.ctr
120 * before reading the update-side futex.
122 static inline void _urcu_signal_read_unlock_update_and_wakeup(unsigned long tmp
)
124 if (caa_likely((tmp
& URCU_GP_CTR_NEST_MASK
) == URCU_GP_COUNT
)) {
126 _CMM_STORE_SHARED(URCU_TLS(urcu_signal_reader
).ctr
, tmp
- URCU_GP_COUNT
);
128 urcu_common_wake_up_gp(&urcu_signal_gp
);
130 _CMM_STORE_SHARED(URCU_TLS(urcu_signal_reader
).ctr
, tmp
- URCU_GP_COUNT
);
134 * Exit an RCU read-side crtical section. Both this function and its
135 * helper are smaller than 10 lines of code, and are intended to be
136 * usable by non-LGPL code, as called out in LGPL.
138 static inline void _urcu_signal_read_unlock(void)
142 urcu_assert(URCU_TLS(urcu_signal_reader
).registered
);
143 tmp
= URCU_TLS(urcu_signal_reader
).ctr
;
144 urcu_assert(tmp
& URCU_GP_CTR_NEST_MASK
);
145 _urcu_signal_read_unlock_update_and_wakeup(tmp
);
146 cmm_barrier(); /* Ensure the compiler does not reorder us with mutex */
150 * Returns whether within a RCU read-side critical section.
152 * This function is less than 10 lines long. The intent is that this
153 * function meets the 10-line criterion for LGPL, allowing this function
154 * to be invoked directly from non-LGPL code.
156 static inline int _urcu_signal_read_ongoing(void)
158 return URCU_TLS(urcu_signal_reader
).ctr
& URCU_GP_CTR_NEST_MASK
;
165 #endif /* _URCU_SIGNAL_STATIC_H */
This page took 0.036077 seconds and 5 git commands to generate.