README

   1 Userspace RCU Implementation
   2 by Mathieu Desnoyers and Paul E. McKenney
   3
   4 BUILDING
   5 --------
   6
   7         ./bootstrap (skip if using tarball)
   8         ./configure
   9         make
  10         make install
  11
  12         Hints:  Forcing 32-bit build:
  13                 * CFLAGS="-m32 -g -O2" ./configure
  14
  15                 Forcing 64-bit build:
  16                 * CFLAGS="-m64 -g -O2" ./configure
  17
  18                 Forcing a 32-bit build with 386 backward compatibility:
  19                 * CFLAGS="-m32 -g -O2" ./configure --host=i386-pc-linux-gnu
  20
  21                 Forcing a 32-bit build for Sparcv9 (typical for Sparc v9)
  22                 * CFLAGS="-m32 -Wa,-Av9a -g -O2" ./configure
  23
  24 ARCHITECTURES SUPPORTED
  25 -----------------------
  26
  27 Currently, x86 (i386, i486, i586, i686), x86 64-bit, PowerPC 32/64, S390, S390x
  28 ARMv7l, Alpha, ia64 and Sparcv9 32/64 are supported. Only tested on Linux so
  29 far, but should theoretically work on other operating systems.
  30
  31 ARMv7l depends on running a Linux kernel 2.6.15 or better.
  32
  33 The gcc compiler versions 3.3, 3.4, 4.0, 4.1, 4.2, 4.3, 4.4 and 4.5 are
  34 supported, with the following exceptions:
  35
  36 - gcc 3.3 and 3.4 have a bug that prevents them from generating volatile
  37   accesses to offsets in a TLS structure on 32-bit x86. These versions are
  38   therefore not compatible with liburcu on x86 32-bit (i386, i486, i586, i686).
  39   The problem has been reported to the gcc community:
  40     http://www.mail-archive.com/gcc-bugs@gcc.gnu.org/msg281255.html
  41 - Alpha, ia64 and ARMv7l architectures depend on 4.x gcc with atomic builtins
  42   support.
  43
  44
  45 QUICK START GUIDE
  46 -----------------
  47
  48 Usage of all urcu libraries
  49
  50         * Define _LGPL_SOURCE (only) if your code is LGPL or GPL compatible
  51           before including the urcu.h or urcu-qsbr.h header. If your application
  52           is distributed under another license, function calls will be generated
  53           instead of inlines, so your application can link with the library.
  54         * Linking with one of the libraries below is always necessary even for
  55           LGPL and GPL applications.
  56
  57 Usage of liburcu
  58
  59         * #include <urcu.h>
  60         * Link the application with "-lurcu".
  61         * This is the preferred version of the library, in terms of
  62           grace-period detection speed, read-side speed and flexibility.
  63           Dynamically detects kernel support for sys_membarrier(). Falls back
  64           on urcu-mb scheme if support is not present, which has slower
  65           read-side.
  66
  67 Usage of liburcu-qsbr
  68
  69         * #include <urcu-qsbr.h>
  70         * Link with "-lurcu-qsbr".
  71         * The QSBR flavor of RCU needs to have each reader thread executing
  72           rcu_quiescent_state() periodically to progress. rcu_thread_online()
  73           and rcu_thread_offline() can be used to mark long periods for which
  74           the threads are not active. It provides the fastest read-side at the
  75           expense of more intrusiveness in the application code.
  76
  77 Usage of liburcu-mb
  78
  79         * #include <urcu.h>
  80         * Compile any _LGPL_SOURCE code using this library with "-DRCU_MB".
  81         * Link with "-lurcu-mb".
  82         * This version of the urcu library uses memory barriers on the writer
  83           and reader sides. This results in faster grace-period detection, but
  84           results in slower reads.
  85
  86 Usage of liburcu-signal
  87
  88         * #include <urcu.h>
  89         * Compile any _LGPL_SOURCE code using this library with "-DRCU_SIGNAL".
  90         * Link the application with "-lurcu-signal".
  91         * Version of the library that requires a signal, typically SIGUSR1. Can
  92           be overridden with -DSIGRCU by modifying Makefile.build.inc.
  93
  94 Usage of liburcu-bp
  95
  96         * #include <urcu-bp.h>
  97         * Link with "-lurcu-bp".
  98         * The BP library flavor stands for "bulletproof". It is specifically
  99           designed to help tracing library to hook on applications without
 100           requiring to modify these applications. rcu_init(),
 101           rcu_register_thread() and rcu_unregister_thread() all become nops.
 102           The state is dealt with by the library internally at the expense of
 103           read-side and write-side performance.
 104
 105 Initialization
 106
 107         Each thread that has reader critical sections (that uses
 108         rcu_read_lock()/rcu_read_unlock() must first register to the URCU
 109         library. This is done by calling rcu_register_thread(). Unregistration
 110         must be performed before exiting the thread by using
 111         rcu_unregister_thread().
 112
 113 Reading
 114
 115         Reader critical sections must be protected by locating them between
 116         calls to rcu_read_lock() and rcu_read_unlock(). Inside that lock,
 117         rcu_dereference() may be called to read an RCU protected pointer.
 118
 119 Writing
 120
 121         rcu_assign_pointer() and rcu_xchg_pointer() may be called anywhere.
 122         After, synchronize_rcu() must be called. When it returns, the old
 123         values are not in usage anymore.
 124
 125 Usage of liburcu-defer
 126
 127         * #include <urcu-defer.h>
 128         * Link with "-lurcu-defer", and also with one of the urcu library
 129           (either urcu, urcu-bp, urcu-mb or urcu-qsbr).
 130         * Provides defer_rcu() primitive to enqueue delayed callbacks. Queued
 131           callbacks are executed in batch periodically after a grace period.
 132           Do _not_ use defer_rcu() within a read-side critical section, because
 133           it may call synchronize_rcu() if the thread queue is full.
 134         * Provides defer_rcu_ratelimit() primitive, which acts just like
 135           defer_rcu(), but takes an additional rate limiter callback forcing
 136           synchronized callback execution of the limiter returns non-zero.
 137         * Requires that rcu_defer_barrier() must be called in library destructor
 138           if a library queues callbacks and is expected to be unloaded with
 139           dlclose().
 140         * Its API is currently experimental. It may change in future library
 141           releases.
 142
 143 Being careful with signals
 144
 145         The liburcu library uses signals internally. The signal handler is
 146         registered with the SA_RESTART flag. However, these signals may cause
 147         some non-restartable system calls to fail with errno = EINTR. Care
 148         should be taken to restart system calls manually if they fail with this
 149         error. A list of non-restartable system calls may be found in
 150         signal(7). The liburcu-mb and liburcu-qsbr versions of the Userspace RCU
 151         library do not require any signal.
 152
 153         Read-side critical sections are allowed in a signal handler with
 154         liburcu and liburcu-mb. Be careful, however, to disable these signals
 155         between thread creation and calls to rcu_register_thread(), because a
 156         signal handler nesting on an unregistered thread would not be allowed to
 157         call rcu_read_lock().
 158
 159         Read-side critical sections are _not_ allowed in a signal handler with
 160         liburcu-qsbr, unless signals are disabled explicitly around each
 161         rcu_quiescent_state() calls, when threads are put offline and around
 162         calls to synchronize_rcu(). Even then, we do not recommend it.
 163
 164 Interaction with mutexes
 165
 166         One must be careful to do not cause deadlocks due to interaction of
 167         synchronize_rcu() and RCU read-side with mutexes. If synchronize_rcu()
 168         is called with a mutex held, this mutex (or any mutex which has this
 169         mutex in its dependency chain) should not be acquired from within a RCU
 170         read-side critical section.
 171
 172 Usage of DEBUG_RCU
 173
 174         DEBUG_RCU is used to add internal debugging self-checks to the
 175         RCU library. This define adds a performance penalty when enabled.
 176         Can be enabled by uncommenting the corresponding line in
 177         Makefile.build.inc.
 178
 179 Usage of DEBUG_YIELD
 180
 181         DEBUG_YIELD is used to add random delays in the code for testing
 182         purposes.
 183
 184 SMP support
 185
 186         By default the library is configured to use synchronization primitives
 187         adequate for SMP systems. On uniprocessor systems, support for SMP
 188         systems can be disabled with:
 189
 190                 ./configure --disable-smp-support
 191
 192         theoretically yielding slightly better performance.